first week, bay

23 media by topicpage 1 of 1
CAPE CANAVERAL, Fla. –  Space shuttle Discovery rolls to the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out from Orbiter Processing Facility 3 was at 7:22 a.m. EDT. In the VAB, Discovery will be lifted into High Bay 1 and mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform.  The shuttle is scheduled to roll out to Launch Pad 39A the first week of   August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4241

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls to the Vehicle A...

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls to the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out from Orbiter Processing Facility 3 was at 7:22 a.m... More

CAPE CANAVERAL, Fla. –  In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the 250-ton high bay crane suspends space shuttle Discovery above the transfer aisle, ready to lift the shuttle into the upper levels and lower it into High Bay 1. Visible on Discovery's underside are the umbilical areas, the external fuel tank attach points. In High Bay 1, Discovery will be attached to the external tank and solid rocket boosters already stacked on the mobile launcher platform.  Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4251

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building at NASA's Ken...

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the 250-ton high bay crane suspends space shuttle Discovery above the transfer aisle, ready to lift the shuttl... More

CAPE CANAVERAL, Fla. –  After rollover from Orbiter Processing Facility 3 at NASA's Kennedy Space Center, Fla., to the transfer aisle of the Vehicle Assembly Building, space shuttle Discovery is being raised to vertical.  It will be lifted into High Bay 1 where it will be mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform.  The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4247

CAPE CANAVERAL, Fla. – After rollover from Orbiter Processing Facilit...

CAPE CANAVERAL, Fla. – After rollover from Orbiter Processing Facility 3 at NASA's Kennedy Space Center, Fla., to the transfer aisle of the Vehicle Assembly Building, space shuttle Discovery is being raised to... More

CAPE CANAVERAL, Fla. –  In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the 250-ton high bay crane moves space shuttle Discovery toward the external fuel tank (foreground, left) and solid rocket boosters (lower right) in High Bay 1. The shuttle will be lowered into the bay and attached to the external tank and SRBs already stacked on the mobile launcher platform. Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4253

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building at NASA's Ken...

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the 250-ton high bay crane moves space shuttle Discovery toward the external fuel tank (foreground, left) and ... More

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, space shuttle Discovery is lowered onto the mobile launcher platform, or MLP.  It is in front of the external fuel tank and solid rocket boosters on either side that are already secured there.  The shuttle will be attached to the external tank on the MLP.  Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4257

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building ...

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, space shuttle Discovery is lowered onto the mobile launcher platform, or MLP. It is in front of ... More

CAPE CANAVERAL, Fla. –  Space shuttle Discovery rolls toward the Vehicle Assembly Building (in the background) at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out of Orbiter Processing Facility 3 was at 7:22 a.m. EDT. In the VAB, Discovery will be lifted into High Bay 1 and mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform.  The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4240

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls toward the Vehic...

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls toward the Vehicle Assembly Building (in the background) at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out of Orbiter Processing Faci... More

CAPE CANAVERAL, Fla. –  Space shuttle Discovery begins its move from Orbiter Processing Facility 3 to the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out of its hangar was at 7:22 a.m. EDT. In the VAB, Discovery will be lifted into High Bay 1 and mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform. The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4237

CAPE CANAVERAL, Fla. – Space shuttle Discovery begins its move from O...

CAPE CANAVERAL, Fla. – Space shuttle Discovery begins its move from Orbiter Processing Facility 3 to the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out of it... More

CAPE CANAVERAL, Fla. –  After rollover from Orbiter Processing Facility 3 at NASA's Kennedy Space Center, Fla., to the transfer aisle of the Vehicle Assembly Building, space shuttle Discovery is being raised to vertical.  It will be lifted into High Bay 1 where it will be mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform. The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4245

CAPE CANAVERAL, Fla. – After rollover from Orbiter Processing Facilit...

CAPE CANAVERAL, Fla. – After rollover from Orbiter Processing Facility 3 at NASA's Kennedy Space Center, Fla., to the transfer aisle of the Vehicle Assembly Building, space shuttle Discovery is being raised to... More

CAPE CANAVERAL, Fla. –  In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, space shuttle Discovery is suspended above the transfer aisle, ready to be lifted into the upper levels and lowered into High Bay 1.  There it will be attached to the external fuel tank and solid rocket boosters already stacked on the mobile launcher platform. Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4250

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building at NASA's Ken...

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, space shuttle Discovery is suspended above the transfer aisle, ready to be lifted into the upper levels and lo... More

CAPE CANAVERAL, Fla. –  In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, space shuttle Discovery is lifted toward the upper reaches where it will be moved and lowered into High Bay 1. There it will be attached to the external fuel tank and solid rocket boosters already stacked on the mobile launcher platform.  Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4252

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building at NASA's Ken...

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, space shuttle Discovery is lifted toward the upper reaches where it will be moved and lowered into High Bay 1.... More

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the solid rocket boosters flank the external fuel tank that will be attached to space shuttle Discovery.  The SRBs and external tank are already stacked on the mobile launcher platform.  Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4259

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building ...

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the solid rocket boosters flank the external fuel tank that will be attached to space shuttle Dis... More

CAPE CANAVERAL, Fla. –  After rollover from Orbiter Processing Facility 3 at NASA's Kennedy Space Center, Fla., to the transfer aisle of the Vehicle Assembly Building, space shuttle Discovery is being raised to vertical.  It will be lifted into High Bay 1 where it will be mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform.  The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4248

CAPE CANAVERAL, Fla. – After rollover from Orbiter Processing Facilit...

CAPE CANAVERAL, Fla. – After rollover from Orbiter Processing Facility 3 at NASA's Kennedy Space Center, Fla., to the transfer aisle of the Vehicle Assembly Building, space shuttle Discovery is being raised to... More

CAPE CANAVERAL, Fla. –  Space shuttle Discovery rolls from Orbiter Processing Facility 3 to the Vehicle Assembly Building (in the background) at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out of its hangar was at 7:22 a.m. EDT. In the VAB, Discovery will be lifted into High Bay 1 and mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform. The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4239

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls from Orbiter Pro...

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls from Orbiter Processing Facility 3 to the Vehicle Assembly Building (in the background) at NASA's Kennedy Space Center, Fla. The first motion of the shuttle... More

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the external fuel tank is in position to be attached to space shuttle Discovery on the mobile launcher platform.  Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4260

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building ...

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the external fuel tank is in position to be attached to space shuttle Discovery on the mobile lau... More

CAPE CANAVERAL, Fla. – Space shuttle Discovery is lowered toward the external fuel tank in High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida.  Discovery will be attached to the external and solid rocket boosters already stacked on the mobile launcher platform. Visible on Discovery's underside are the umbilical areas, the external fuel tank attach points. Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4256

CAPE CANAVERAL, Fla. – Space shuttle Discovery is lowered toward the e...

CAPE CANAVERAL, Fla. – Space shuttle Discovery is lowered toward the external fuel tank in High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. Discovery will be attached to t... More

CAPE CANAVERAL, Fla. –  Space shuttle Discovery rolls to the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out from Orbiter Processing Facility 3 was at 7:22 a.m. EDT. In the VAB, Discovery will be lifted into High Bay 1 and mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform.  The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4242

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls to the Vehicle A...

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls to the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out from Orbiter Processing Facility 3 was at 7:22 a.m... More

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, space shuttle Discovery is lowered onto the mobile launcher platform, or MLP.  It is in front of the external fuel tank and solid rocket boosters on either side.  The shuttle will be attached to the external tank on the MLP. Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4258

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building ...

CAPE CANAVERAL, Fla. – In High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, space shuttle Discovery is lowered onto the mobile launcher platform, or MLP. It is in front of ... More

CAPE CANAVERAL, Fla. – Seen from below, space shuttle Discovery is lowered into High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida.  In the bay, Discovery will be attached to the external fuel tank and solid rocket boosters already stacked on the mobile launcher platform. Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4254

CAPE CANAVERAL, Fla. – Seen from below, space shuttle Discovery is low...

CAPE CANAVERAL, Fla. – Seen from below, space shuttle Discovery is lowered into High Bay 1 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. In the bay, Discovery will be attached to ... More

CAPE CANAVERAL, Fla. –  Space shuttle Discovery rolls into the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out Orbiter Processing Facility 3 was at 7:22 a.m. EDT. In the VAB, Discovery will be lifted into High Bay 1 and mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform.  The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4243

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls into the Vehicle...

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls into the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out Orbiter Processing Facility 3 was at 7:22 a.m. E... More

CAPE CANAVERAL, Fla. –  Space shuttle Discovery rolls out of Orbiter Processing Facility 3 to the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out of its hangar was at 7:22 a.m. EDT. In the VAB, Discovery will be lifted into High Bay 1 and mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform. The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4238

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls out of Orbiter P...

CAPE CANAVERAL, Fla. – Space shuttle Discovery rolls out of Orbiter Processing Facility 3 to the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out of its hangar... More

CAPE CANAVERAL, Fla. –  In the transfer aisle of the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla., space shuttle Discovery is lifted from its transporter.  The shuttle will be raised to vertical and lifted into High Bay 1. The first motion of the shuttle out of Orbiter Processing Facility 3 was at 7:22 a.m. EDT.  Discovery will be mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform.  The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4244

CAPE CANAVERAL, Fla. – In the transfer aisle of the Vehicle Assembly ...

CAPE CANAVERAL, Fla. – In the transfer aisle of the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla., space shuttle Discovery is lifted from its transporter. The shuttle will be raised to vertic... More

CAPE CANAVERAL, Fla. –  With the 250-ton high bay crane in its upright position, space shuttle Discovery is suspended above the transfer aisle  of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida.  The shuttle is ready to be lifted into the upper levels and lowered into High Bay 1.  There it will be attached to the external fuel tank and solid rocket boosters already stacked on the mobile launcher platform.  Discovery is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  The shuttle will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Ben Smegelsky KSC-2009-4249

CAPE CANAVERAL, Fla. – With the 250-ton high bay crane in its upright...

CAPE CANAVERAL, Fla. – With the 250-ton high bay crane in its upright position, space shuttle Discovery is suspended above the transfer aisle of the Vehicle Assembly Building at NASA's Kennedy Space Center in... More

CAPE CANAVERAL, Fla. –  After rollover from Orbiter Processing Facility 3 at NASA's Kennedy Space Center, Fla., to the transfer aisle of the Vehicle Assembly Building, space shuttle Discovery is being raised to vertical.  It will be lifted into High Bay 1 where it will be mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform.  The shuttle is scheduled to roll out to Launch Pad 39A the first week of August to prepare for the STS-128 mission to the International Space Station.  Discovery will carry the Leonardo Multi-Purpose Logistics Module containing life support racks and science racks and the Lightweight Multi-Purpose Experiment Support Structure Carrier in its payload bay.  Launch of Discovery is targeted for late August.  Photo credit: NASA/Kim Shiflett KSC-2009-4246

CAPE CANAVERAL, Fla. – After rollover from Orbiter Processing Facilit...

CAPE CANAVERAL, Fla. – After rollover from Orbiter Processing Facility 3 at NASA's Kennedy Space Center, Fla., to the transfer aisle of the Vehicle Assembly Building, space shuttle Discovery is being raised to... More