CAPE CANAVERAL, Fla. - Crews in Orbiter Processing Facility-2 at NASA'...
CAPE CANAVERAL, Fla. - Crews in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida remove space shuttle Discovery's right-hand inner heat shield from engine No. 1. The removal is part of Di... More
KENNEDY SPACE CENTER, FLA. -- In Highbay 1 inside the Vehicle Assembly...
KENNEDY SPACE CENTER, FLA. -- In Highbay 1 inside the Vehicle Assembly Building, workers secure scaffolding around the external tank to prepare it for repairs. A severe thunderstorm with golf ball-sized hail ca... More
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s ...
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians install a heat shield around one of space shuttle Endeavour’s replica shu... More
CAPE CANAVERAL, Fla. – Kennedy Space Center Director Bob Cabana, left,...
CAPE CANAVERAL, Fla. – Kennedy Space Center Director Bob Cabana, left, explains the placement of high-temperature reusable surface insulation HRSI tile on the underbelly of space shuttle Atlantis to Florida’s L... More
KENNEDY SPACE CENTER, Fla. -- With the Rotating Service Structure roll...
KENNEDY SPACE CENTER, Fla. -- With the Rotating Service Structure rolled back, Space Shuttle Discovery is revealed, poised for launch on mission STS-102 at 6:42 a.m. EST March 8. It sits on the Mobile Launcher ... More
CAPE CANAVERAL, Fla. -- Workers unload a container holding the cruise ...
CAPE CANAVERAL, Fla. -- Workers unload a container holding the cruise stage, one of the first three elements for NASA's Mars Science Laboratory (MSL) that arrived at NASA Kennedy Space Center's Shuttle Landing ... More
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s ...
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians lift a heat shield for installation around one of space shuttle Endeavour... More
KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis, mounted on a mo...
KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis, mounted on a mobile launch platform atop a crawler transporter, begins the climb to the top of Launch Pad 39A. First motion of the shuttle out of the Vehi... More
KENNEDY SPACE CENTER, FLA. -- As it rolls back to the Vehicle Assemb...
KENNEDY SPACE CENTER, FLA. -- As it rolls back to the Vehicle Assembly Building, Space Shuttle Atlantis, atop the mobile launcher platform, is framed in the photo by winter-stripped branches topped by spring ... More
KENNEDY SPACE CENTER, FLA. - At the SRB Assembly and Refurbishment Fa...
KENNEDY SPACE CENTER, FLA. - At the SRB Assembly and Refurbishment Facility, STS-114 Mission Specialists Andrew Thomas (center) and Charles Camarda (right) look at a test panel of insulation material (left) cu... More
KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building, Unite...
KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building, United Space Alliance technicians Brenda Morris and Brian Williams are applying foam and molds on Space Shuttle Atlantis' external tank to areas ... More
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-1 at NASA’s ...
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-1 at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a large crane lifts a dome heat shield that will be installed around on... More
CAPE CANAVERAL, Fla. – At the Shuttle Landing Facility at NASA's Kenne...
CAPE CANAVERAL, Fla. – At the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, the heat shield for the agency's Orion spacecraft arrived aboard the Super Guppy aircraft. The largest of its ki... More
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's...
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew checks out the heat shield tiles that protect space shuttles during re-entry. From left, ... More
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s ...
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians prepare a heat shield for installation around space shuttle Endeavour’s r... More
CAPE CANAVERAL, Fla. -- In this aerial view, NASA's Orion crew module,...
CAPE CANAVERAL, Fla. -- In this aerial view, NASA's Orion crew module, enclosed in its crew module transportation fixture and secured on a flatbed truck is passing the Kennedy Space Center Visitor Complex on it... More
KENNEDY SPACE CENTER, FLA. -- Under a feather-painted sky, Space Shut...
KENNEDY SPACE CENTER, FLA. -- Under a feather-painted sky, Space Shuttle Atlantis, mounted on a mobile launch platform atop a crawler transporter, creeps up the ramp to Launch Pad 39A. This is the second roll... More
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's ...
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, heat lamps assist United Space Alliance technician Jeff Holmes in a putty repair on some of the high-temper... More
CAPE CANAVERAL, Fla. – After rotation of the Wide Field Camera 3 (bac...
CAPE CANAVERAL, Fla. – After rotation of the Wide Field Camera 3 (background left), or WFC3, in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, technicians check the data. The WFC3 wi... More
LAS VEGAS -- The Boeing Company tests the forward heat shield FHS jett...
LAS VEGAS -- The Boeing Company tests the forward heat shield FHS jettison system of its CST-100 spacecraft at the Bigelow Aerospace facility in Las Vegas as part of an agreement with NASA's Commercial Crew Pro... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facil...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, the Phoenix Mars Lander (foreground) can be seen inside the backshell. In the background, workers are helping place the heat shield, j... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Faci...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, technicians prepare to install the heat shield on the Phoenix Mars Lander spacecraft. The Phoenix mission is the first project in NASA... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Faci...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, an overhead crane moves the heat shield toward a platform at left. The heat shield was removed from the Phoenix Mars Lander spacecraf... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facil...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, workers help guide the heat shield onto a platform. The heat shield was removed from the Phoenix Mars Lander spacecraft.. The Phoenix ... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Faci...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, the heat shield for the Phoenix Mars Lander is moved into position for installation on the spacecraft. The Phoenix mission is the firs... More
CAPE CANAVERAL, Fla. - Crews in Orbiter Processing Facility-2 at NASA'...
CAPE CANAVERAL, Fla. - Crews in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida remove space shuttle Discovery's right-hand inner heat shield from engine No. 1. The removal is part of Di... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Faci...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, technicians complete the installation of the heat shield on the Phoenix Mars Lander spacecraft. The Phoenix mission is the first proje... More
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s ...
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, a United Space Alliance technician installs an outer heat shield carrier panel on the space shuttle Endeavo... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Faci...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, technicians lower a crane over the Phoenix Mars Lander spacecraft. The crane will be used to remove the heat shield from around the P... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Faci...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, technicians install the heat shield on the Phoenix Mars Lander spacecraft. The Phoenix mission is the first project in NASA's first op... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Faci...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, technicians attach a crane to the Phoenix Mars Lander spacecraft. The crane will be used to remove the heat shield from around the Ph... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Faci...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, workers watch as an overhead crane lowers the heat shield toward a platform. The heat shield was removed from the Phoenix Mars Lander ... More
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's ...
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technician Jeff Holmes makes a putty repair on some of the high-temperature reusable... More
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s ...
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, heat shields are being installed around space shuttle Endeavour’s replica shuttle main engines. The wo... More
Phoenix Mars Lander Spacecraft Heat Shield Installation
In the Payload Hazardous Servicing Facility, technicians install the heat shield on the Phoenix Mars Lander spacecraft. The Phoenix mission is the first project in NASA's first openly competed program of Mars S... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facil...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, the Phoenix Mars Lander (foreground) can be seen inside the backshell. In the background, workers are helping place the heat shield, j... More
Phoenix Mars Lander Spacecraft Heat Shield Installation
In the Payload Hazardous Servicing Facility, technicians complete the installation of the heat shield on the Phoenix Mars Lander spacecraft. The Phoenix mission is the first project in NASA's first openly compe... More
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Faci...
KENNEDY SPACE CENTER, FLA. -- In the Payload Hazardous Servicing Facility, an overhead crane lifts the heat shield from the Phoenix Mars Lander spacecraft. The Phoenix mission is the first project in NASA's f... More
Phoenix Mars Lander Spacecraft Heat Shield Installation
In the Payload Hazardous Servicing Facility, the Phoenix Mars Lander spacecraft undergoes spin testing. The Phoenix mission is the first project in NASA's first openly competed program of Mars Scout missions. P... More
Phoenix Mars Lander Spacecraft Heat Shield Installation
In the Payload Hazardous Servicing Facility, the heat shield for the Phoenix Mars Lander is moved into position for installation on the spacecraft. The Phoenix mission is the first project in NASA's first openl... More
KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 1 at ...
KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 1 at NASA's Kennedy Space Center, workers complete installation of the orbiter boom sensor system into Atlantis' payload bay. The 50-foot-long bo... More
KENNEDY SPACE CENTER, FLA. -- Seen from behind the mobile launcher p...
KENNEDY SPACE CENTER, FLA. -- Seen from behind the mobile launcher platform, the orange external tank and solid rocket boosters all but hide Atlantis. The crawlerway stretches in a curve on the other side. ... More
CAPE CANAVERAL, Fla. – At the Shuttle Landing Facility at NASA's Kenne...
CAPE CANAVERAL, Fla. – At the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, the heat shield for the agency's Orion spacecraft is about to be offloaded from the Super Guppy aircraft. The la... More
Phoenix Mars Lander Spacecraft Heat Shield Installation
In the Payload Hazardous Servicing Facility, technicians prepare to install the heat shield on the Phoenix Mars Lander spacecraft. The Phoenix mission is the first project in NASA's first openly competed progra... More
CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Orbiter Process...
CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Orbiter Processing Facility bay 2, workers watch the movement of space shuttle Endeavour's Orbiter Boom Sensor System as it is lowered into the payload bay... More
Phoenix Mars Lander Spacecraft Heat Shield Installation
In the Payload Hazardous Servicing Facility, the Phoenix Mars Lander spacecraft undergoes spin testing. The Phoenix mission is the first project in NASA's first openly competed program of Mars Scout missions. P... More
Apollo 13 astronauts participate in walk-through of EVA timeline at KS...
S70-29673 (28 Jan. 1970) --- Astronaut Fred W. Haise Jr., lunar module pilot of the Apollo 13 lunar landing mission, participates in a walk-through of the extravehicular activity timeline at the Kennedy Space C... More
KENNEDY SPACE CENTER, FLA. - Space Shuttle Main Engine (SSME) No. 203...
KENNEDY SPACE CENTER, FLA. - Space Shuttle Main Engine (SSME) No. 2036, the first of the new Block 1 engines to fly, awaits installation into position one of the orbiter Discovery in Orbiter Processing Facili... More
KENNEDY SPACE CENTER, FLA. - A Space Shuttle Main Engine (SSME) hoist...
KENNEDY SPACE CENTER, FLA. - A Space Shuttle Main Engine (SSME) hoist prepares to lift the first Block 1 engine to be installed in an orbiter into the number one position on Discovery while the spaceplane is b... More
An employee in the Payload Hazardous Servicing Facility (PHSF) sews th...
An employee in the Payload Hazardous Servicing Facility (PHSF) sews thermal insulation material on the front heat shield of the Huygens probe during prelaunch processing testing and integration in that facility... More
An employee in the Payload Hazardous Servicing Facility (PHSF) sews th...
An employee in the Payload Hazardous Servicing Facility (PHSF) sews thermal insulation material on the back cover and heat shield of the Huygens probe during prelaunch processing, testing and integration in tha... More
Environmental Health Specialist Jamie A. Keeley, of EG&G Florida Inc.,...
Environmental Health Specialist Jamie A. Keeley, of EG&G Florida Inc., uses an ion chamber dose rate meter to measure radiation levels in one of three radioisotope thermoelectric generators (RTGs) that will pro... More
Jet Propulsion Laboratory (JPL) technicians finish mounting a thermal ...
Jet Propulsion Laboratory (JPL) technicians finish mounting a thermal model of a radioisotope thermoelectric generator (RTG) on the installation cart which will be used to install the RTG in the Cassini spacecr... More
A Daimler-Benz Aerospace staff member inspects the heat shield of the...
A Daimler-Benz Aerospace staff member inspects the heat shield of the Huygens probe after the shield was installed in the Payload Hazardous Servicing Facility at KSC in July. Instruments mounted on the probe,... More
This radioisotope thermoelectric generator (RTG), at center, will und...
This radioisotope thermoelectric generator (RTG), at center, will undergo mechanical and electrical verification testing now that it has been installed on the Cassini spacecraft in the Payload Hazardous Servi... More
Jet Propulsion Laboratory (JPL) workers David Rice, at left, and John...
Jet Propulsion Laboratory (JPL) workers David Rice, at left, and Johnny Melendez rotate a radioisotope thermoelectric generator (RTG) to the horizontal position on a lift fixture in the Payload Hazardous Serv... More
This radioisotope thermoelectric generator (RTG), at center, is ready...
This radioisotope thermoelectric generator (RTG), at center, is ready for electrical verification testing now that it has been installed on the Cassini spacecraft in the Payload Hazardous Servicing Facility. ... More
Jet Propulsion Laboratory (JPL) workers prepare the installation cart...
Jet Propulsion Laboratory (JPL) workers prepare the installation cart (atop the platform) for removal of a radioisotope thermoelectric generator (RTG) from the adjacent Cassini spacecraft. This is the second ... More
Jet Propulsion Laboratory (JPL) workers carefully roll into place a p...
Jet Propulsion Laboratory (JPL) workers carefully roll into place a platform with a second radioisotope thermoelectric generator (RTG) for installation on the Cassini spacecraft. In background at left, the fi... More
Jet Propulsion Laboratory (JPL) workers use a borescope to verify pre...
Jet Propulsion Laboratory (JPL) workers use a borescope to verify pressure relief device bellows integrity on a radioisotope thermoelectric generator (RTG) which has been installed on the Cassini spacecraft i... More
Carrying a neutron radiation detector, Fred Sanders (at center), a he...
Carrying a neutron radiation detector, Fred Sanders (at center), a health physicist with the Jet Propulsion Laboratory (JPL), and other health physics personnel monitor radiation in the Payload Hazardous Serv... More
Jet Propulsion Laboratory (JPL) engineers examine the interface surfa...
Jet Propulsion Laboratory (JPL) engineers examine the interface surface on the Cassini spacecraft prior to installation of the third radioisotope thermoelectric generator (RTG). The other two RTGs, at left, a... More
Jet Propulsion Laboratory (JPL) workers Dan Maynard and John Shuping ...
Jet Propulsion Laboratory (JPL) workers Dan Maynard and John Shuping prepare to install a radioisotope thermoelectric generator (RTG) on the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHS... More
Supported on a lift fixture, this radioisotope thermoelectric generat...
Supported on a lift fixture, this radioisotope thermoelectric generator (RTG), at center, is hoisted from its storage base using the airlock crane in the Payload Hazardous Servicing Facility (PHSF). Jet Propu... More
Lockheed Martin Missile and Space Co. employees Joe Collingwood, at r...
Lockheed Martin Missile and Space Co. employees Joe Collingwood, at right, and Ken Dickinson retract pins in the storage base to release a radioisotope thermoelectric generator (RTG) in preparation for hoisti... More
Jet Propulsion Laboratory (JPL) employees bolt a radioisotope thermoe...
Jet Propulsion Laboratory (JPL) employees bolt a radioisotope thermoelectric generator (RTG) onto the Cassini spacecraft, at left, while other JPL workers, at right, operate the installation cart on a raised ... More
Workers in the Payload Hazardous Servicing Facility remove the stora...
Workers in the Payload Hazardous Servicing Facility remove the storage collar from a radioisotope thermoelectric generator (RTG) in preparation for installation on the Cassini spacecraft. Cassini will be out... More
Jet Propulsion Laboratory (JPL) employees Norm Schwartz, at left, and...
Jet Propulsion Laboratory (JPL) employees Norm Schwartz, at left, and George Nakatsukasa transfer one of three radioisotope thermoelectric generators (RTGs) to be used on the Cassini spacecraft from the inst... More
Jet Propulsion Laboratory (JPL) worker Mary Reaves mates connectors o...
Jet Propulsion Laboratory (JPL) worker Mary Reaves mates connectors on a radioisotope thermoelectric generator (RTG) to power up the Cassini spacecraft, while quality assurance engineer Peter Sorci looks on. ... More
Dornier Satelliten Systeme (DSS) workers lift the front heat shield of...
Dornier Satelliten Systeme (DSS) workers lift the front heat shield of the Huygens probe in the Payload Hazardous Servicing Facility (PHSF) at KSC. The spacecraft was returned to the PHSF after damage to therma... More
Dornier Satelliten Systeme (DSS) workers place the back cover of the H...
Dornier Satelliten Systeme (DSS) workers place the back cover of the Huygens probe under its front heat shield in the Payload Hazardous Servicing Facility (PHSF) at KSC. The spacecraft was returned to the PHSF ... More
Dornier Satelliten Systeme (DSS) workers lift the heat shield of the H...
Dornier Satelliten Systeme (DSS) workers lift the heat shield of the Huygens probe in the Payload Hazardous Servicing Facility (PHSF) at KSC. The spacecraft was returned to the PHSF after damage to thermal insu... More
Dornier Satelliten Systeme (DSS) workers place the back cover of the H...
Dornier Satelliten Systeme (DSS) workers place the back cover of the Huygens probe under its front heat shield in the Payload Hazardous Servicing Facility (PHSF) at KSC. The spacecraft was returned to the PHSF ... More
Dornier Satelliten Systeme (DSS) workers lift the heat shield of the H...
Dornier Satelliten Systeme (DSS) workers lift the heat shield of the Huygens probe in the Payload Hazardous Servicing Facility (PHSF) at KSC. The spacecraft was returned to the PHSF after damage to thermal insu... More
STS-86 Mission Specialist Jean-Loup J.M. Chretien of the French Space ...
STS-86 Mission Specialist Jean-Loup J.M. Chretien of the French Space Agency, CNES, can still feel heat from the nose of the orbiter Atlantis more than an hour after landing on KSC’s Runway 15 of the Shuttle La... More
STS-86 Pilot Michael J. Bloomfield, the only space rookie on the crew,...
STS-86 Pilot Michael J. Bloomfield, the only space rookie on the crew, feels the heat from a tire on the orbiter Atlantis more than an hour after the landing on KSC’s Runway 15. The nearly 11-day mission ended ... More
KENNEDY SPACE CENTER, FLA. -- At Launch Complex 40 on Cape Canaveral A...
KENNEDY SPACE CENTER, FLA. -- At Launch Complex 40 on Cape Canaveral Air Station, workers are installing three Radioisotope Thermoelectric Generators (RTGs) on the Cassini spacecraft. RTGs are lightweight, comp... More
At Launch Complex 40 on Cape Canaveral Air Station, workers are instal...
At Launch Complex 40 on Cape Canaveral Air Station, workers are installing three Radioisotope Thermoelectric Generators (RTGs) on the Cassini spacecraft. RTGs are lightweight, compact spacecraft electrical powe... More
At Launch Complex 40 on Cape Canaveral Air Station, one of three Radio...
At Launch Complex 40 on Cape Canaveral Air Station, one of three Radioisotope Thermoelectric Generators (RTGs) is being installed on the Cassini spacecraft. RTGs are lightweight, compact spacecraft electrical p... More
At Launch Complex 40 on Cape Canaveral Air Station, workers are instal...
At Launch Complex 40 on Cape Canaveral Air Station, workers are installing three Radioisotope Thermoelectric Generators (RTGs) on the Cassini spacecraft. RTGs are lightweight, compact spacecraft electrical powe... More
KENNEDY SPACE CENTER, FLA. -- At Launch Complex 40 on Cape Canaveral A...
KENNEDY SPACE CENTER, FLA. -- At Launch Complex 40 on Cape Canaveral Air Station, workers are installing three Radioisotope Thermoelectric Generators (RTGs) on the Cassini spacecraft. RTGs are lightweight, comp... More
At Launch Complex 40 on Cape Canaveral Air Station, workers are instal...
At Launch Complex 40 on Cape Canaveral Air Station, workers are installing three Radioisotope Thermoelectric Generators (RTGs) on the Cassini spacecraft. RTGs are lightweight, compact spacecraft electrical powe... More
At Launch Complex 40 on Cape Canaveral Air Station, workers are instal...
At Launch Complex 40 on Cape Canaveral Air Station, workers are installing three Radioisotope Thermoelectric Generators (RTGs) on the Cassini spacecraft. RTGs are lightweight, compact spacecraft electrical powe... More
KENNEDY SPACE CENTER, FLA. -- The International Space Station's Node 1...
KENNEDY SPACE CENTER, FLA. -- The International Space Station's Node 1 and Pressurized Mating Adapter-1 (PMA-1) are rotated by workers in KSC's Space Station Processing Facility. The node is rotated to provide ... More
KENNEDY SPACE CENTER, FLA. -- The International Space Station's Node 1...
KENNEDY SPACE CENTER, FLA. -- The International Space Station's Node 1 and Pressurized Mating Adapter-1 (PMA-1) are rotated by workers in KSC's Space Station Processing Facility. The node is rotated to provide ... More
KENNEDY SPACE CENTER, FLA. -- The International Space Station's Node 1...
KENNEDY SPACE CENTER, FLA. -- The International Space Station's Node 1 and Pressurized Mating Adapter-1 (PMA-1) are rotated by workers in KSC's Space Station Processing Facility. The node is rotated to provide ... More
KENNEDY SPACE CENTER, FLA. -- The Long Spacer, a component of the Inte...
KENNEDY SPACE CENTER, FLA. -- The Long Spacer, a component of the International Space Station, arrives and is moved to its test stand in the northeast corner of the high bay in KSC's Space Station Processing Fa... More
KENNEDY SPACE CENTER, FLA. -- The Long Spacer, a component of the Inte...
KENNEDY SPACE CENTER, FLA. -- The Long Spacer, a component of the International Space Station, arrives and is moved to its test stand in the northeast corner of the high bay in KSC's Space Station Processing Fa... More
KENNEDY SPACE CENTER, FLA. -- The Long Spacer, a component of the Inte...
KENNEDY SPACE CENTER, FLA. -- The Long Spacer, a component of the International Space Station, arrives and is moved to its test stand in the northeast corner of the high bay in KSC's Space Station Processing Fa... More
KENNEDY SPACE CENTER, FLA. -- The Long Spacer, a component of the Inte...
KENNEDY SPACE CENTER, FLA. -- The Long Spacer, a component of the International Space Station, arrives and is moved to its test stand in the northeast corner of the high bay in KSC's Space Station Processing Fa... More
KENNEDY SPACE CENTER, Fla. -- The Space Coast's natural foliage frame...
KENNEDY SPACE CENTER, Fla. -- The Space Coast's natural foliage frames the Space Shuttle Discovery and the reflection of the intense heat and light of its liftoff from Launch Pad 39A at 6:06:24 p.m. EDT June 2... More
KENNEDY SPACE CENTER, Fla. -- The Space Coast's natural foliage frame...
KENNEDY SPACE CENTER, Fla. -- The Space Coast's natural foliage frames the Space Shuttle Discovery and the reflection of the intense heat and light of its liftoff from Launch Pad 39A at 6:06:24 p.m. EDT June 2... More
KENNEDY SPACE CENTER, Fla. -- The Space Coast's natural foliage frame...
KENNEDY SPACE CENTER, Fla. -- The Space Coast's natural foliage frames the Space Shuttle Discovery and the reflection of the intense heat and light of its liftoff from Launch Pad 39A at 6:06:24 p.m. EDT June 2... More
In the Tile Fabrication Shop, Tony Rollins, with United Space Alliance...
In the Tile Fabrication Shop, Tony Rollins, with United Space Alliance, cuts a High-Temperature Reusable Surface Insulation (HRSI) tile on a gun stock contour milling machine. About 70 percent of a Space Shuttl... More
In the Tile Fabrication Shop, Tony Rollins, with United Space Alliance...
In the Tile Fabrication Shop, Tony Rollins, with United Space Alliance, holds down a curtain while making a test sample of tile on a block 5-axis computerized numerical control milling machine. About 70 percent... More
In the Spacecraft Assembly and Encapsulation Facility-2 (SAEF-2), work...
In the Spacecraft Assembly and Encapsulation Facility-2 (SAEF-2), workers lower the heat shield onto the Mars Polar Lander. Scheduled to be launched on Jan. 3, 1999, the lander is a solar-powered spacecraft des... More
In the Spacecraft Assembly and Encapsulation Facility-2 (SAEF-2), work...
In the Spacecraft Assembly and Encapsulation Facility-2 (SAEF-2), workers get ready to lift the heat shield for the Mars Polar Lander off the workstand before attaching it to the lander. Scheduled to be launche... More
KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia sits on Launch Pa...
KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia sits on Launch Pad 39B in preparation for the launch of STS-93. This view shows the flame trench, 490 feet long and 40 feet high, which helps contain the int... More
KENNEDY SPACE CENTER, FLA. -- The S0 truss segment is moved into the O...
KENNEDY SPACE CENTER, FLA. -- The S0 truss segment is moved into the Operations and Checkout Bldg. (O&C) for processing. The truss arrived at the SLF aboard a "Super Guppy" aircraft from Boeing in Huntington, C... More
KENNEDY SPACE CENTER, FLA. -- Inside the Operations and Checkout Bldg....
KENNEDY SPACE CENTER, FLA. -- Inside the Operations and Checkout Bldg. (O&C), an overhead crane is centered over the S0 truss segment before lowering. The crane will move it to a workstand in the O&C where it w... More