insulation, nasa

1,060 media by topicpage 1 of 11
KENNEDY SPACE CENTER, FLA. - A crack formed on a piece of insulation on a strut that attaches the liquid oxygen feedline to External Tank-119, being used to launch space shuttle mission STS-121. This piece of foam, weighing approximately 0.0057 pounds, is three inches long and one-eighth to one-quarter inch wide.  It fell from the tank and was recovered by the Ice Team from the mobile launch platform at Pad 39B.  It is believed that the rain experienced during yesterday’s launch attempt of Discovery caused water to run down the feedline and form ice near the strut next to the feedline bracket.  As the tank warmed and expanded, the ice that formed most likely pinched the foam on the top of the strut, causing a crack and eventual loss of the small piece of foam. Photo credit: NASA KSC-06pd1384

KENNEDY SPACE CENTER, FLA. - A crack formed on a piece of insulation o...

KENNEDY SPACE CENTER, FLA. - A crack formed on a piece of insulation on a strut that attaches the liquid oxygen feedline to External Tank-119, being used to launch space shuttle mission STS-121. This piece of f... More

KENNEDY SPACE CENTER, FLA. -  In the SRB Assembly and Refurbishment Facility,  STS-114 Mission Specialist Wendy Lawrence looks at a test design of the bolt catcher insulation.  The STS-114 crew is at KSC for familiarization with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment, plus the external stowage platform, to the International Space Station. KSC-04pd0515

KENNEDY SPACE CENTER, FLA. - In the SRB Assembly and Refurbishment Fa...

KENNEDY SPACE CENTER, FLA. - In the SRB Assembly and Refurbishment Facility, STS-114 Mission Specialist Wendy Lawrence looks at a test design of the bolt catcher insulation. The STS-114 crew is at KSC for fa... More

KENNEDY SPACE CENTER, FLA. -- A Lockheed Martin external tank technician from the Michoud Assembly Facility in New Orleans inspects the foam modification on external tank 120 in the Vehicle Assembly Building.  The foam insulation and super lightweight ablator cork insulation were removed from the external tank and LO2 feed line bracket on Aug. 24 and replaced only with BX265 foam insulation.   The tank is scheduled to fly on Space Shuttle Discovery in October 2007 on mission STS-120.  Photo credit: NASA/Jim Grossmann KSC-07pd2374

KENNEDY SPACE CENTER, FLA. -- A Lockheed Martin external tank technici...

KENNEDY SPACE CENTER, FLA. -- A Lockheed Martin external tank technician from the Michoud Assembly Facility in New Orleans inspects the foam modification on external tank 120 in the Vehicle Assembly Building. ... More

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, a United Space Alliance technician removes foam insulation revealing the fastener holes on the covers over the feed-through connector box on the external tank for space shuttle Atlantis' STS-122 mission.   The covers will be removed for access to the feed-through connectors.  Following the failure of some of the tank's engine cutoff sensors, or ECO sensors, during propellant tanking for launch attempts on Dec. 6 and Dec. 9, a tanking test was conducted on Dec. 18 to aid in troubleshooting the cause. Technicians spliced test wiring into the ECO sensor electrical system and used time domain reflectometry equipment to help locate the electrical anomaly. Results of the tanking test pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The feed-through connector passes the wires from the inside of the tank to the outside.  During the holiday period, workers from Lockheed Martin will begin inspecting and testing the connector.  Shuttle program managers will meet on Dec. 27 to review the test and analysis, and decide on a forward plan.  Photo credit: NASA/Kim Shiflett KSC-07pd3656

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, a United Space Allian...

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, a United Space Alliance technician removes foam insulation revealing the fastener holes on the covers over the feed-through connector box on the external tank fo... More

KENNEDY SPACE CENTER, FLA. -- In Highbay 1 inside the Vehicle Assembly Building, workers secure scaffolding around the external tank to prepare it for repairs. A severe thunderstorm with golf ball-sized hail caused visible divots in the giant tank's foam insulation and minor surface damage to about 26 heat shield tiles on the shuttle's left wing. A new target launch date has not been determined, but teams will focus on preparing Atlantis for liftoff in late April on mission STS-117. Photo credit: NASA/Jim Grossmann KSC-07pd0601

KENNEDY SPACE CENTER, FLA. -- In Highbay 1 inside the Vehicle Assembly...

KENNEDY SPACE CENTER, FLA. -- In Highbay 1 inside the Vehicle Assembly Building, workers secure scaffolding around the external tank to prepare it for repairs. A severe thunderstorm with golf ball-sized hail ca... More

CAPE CANAVERAL, Fla. -- Repair work to space shuttle Discovery's external fuel tank begins in the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. Technicians will modify 32 support beams, called stringers, on the tank's intertank region by fitting pieces of metal, called radius blocks, over the stringers' edges where they attach to the thrust panel area. The thrust panel is where the tank meets the two solid rocket boosters and sees the most stress during the flight into orbit. After the modifications and additional scans of the stringers are complete, foam insulation will be re-applied.            Discovery's next launch opportunity to the International Space Station on the STS-133 mission is no earlier than Feb. 3, 2011. For more information on STS-133, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts133/. Photo credit: NASA/Jack Pfaller KSC-2011-1000

CAPE CANAVERAL, Fla. -- Repair work to space shuttle Discovery's exter...

CAPE CANAVERAL, Fla. -- Repair work to space shuttle Discovery's external fuel tank begins in the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. Technicians will modify 32 support beams, c... More

CAPE CANAVERAL, Fla. – Kennedy Space Center Director Bob Cabana, left, explains the placement of high-temperature reusable surface insulation HRSI tile on the underbelly of space shuttle Atlantis to Florida’s Lt. Gov. Jennifer Carroll during a tour of Kennedy’s Orbiter Processing Facility-1. The tile is part of the shuttle’s thermal protection system which covers the shuttle’s exterior and protects it from the heat of re-entry.    The tour coincided with Carroll’s visit to Kennedy for a meeting with Cabana. Atlantis is being prepared for public display at the Kennedy Space Center Visitor Complex in 2013. The groundbreaking for Atlantis’ exhibit hall took place in January Atlantis is scheduled to be moved to the visitor complex in November. For more information, visit http://www.nasa.gov/shuttle.  Photo credit: NASA/Jim Grossmann KSC-2012-1962

CAPE CANAVERAL, Fla. – Kennedy Space Center Director Bob Cabana, left,...

CAPE CANAVERAL, Fla. – Kennedy Space Center Director Bob Cabana, left, explains the placement of high-temperature reusable surface insulation HRSI tile on the underbelly of space shuttle Atlantis to Florida’s L... More

CAPE CANAVERAL, Fla. -- Space shuttle Discovery's external fuel tank is being prepared for computed radiography scans inside the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. The shuttle stack, consisting of the shuttle, external tank and solid rocket boosters, was moved off Launch Pad 39A so technicians could examine 21-foot-long support beams, called stringers, on the outside of the tank's intertank and re-apply foam insulation.          Discovery's next launch opportunity to the International Space Station on the STS-133 mission is no earlier than Feb. 3, 2011. For more information on STS-133, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts133/. Photo credit: NASA/Frankie Martin KSC-2010-5956

CAPE CANAVERAL, Fla. -- Space shuttle Discovery's external fuel tank i...

CAPE CANAVERAL, Fla. -- Space shuttle Discovery's external fuel tank is being prepared for computed radiography scans inside the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. The shuttle ... More

CAPE CANAVERAL, Fla. -- Technicians in the Astrotech payload processing facility in Titusville, Fla. install thermal insulation on NASA's Juno magnetometer boom. The boom structure is attached to Juno's solar array #1 that will help power the NASA spacecraft on its mission to Jupiter.      The solar-powered spacecraft will orbit Jupiter's poles 33 times to find out more about the gas giant's origins, structure, atmosphere and magnetosphere and investigate the existence of a solid planetary core. Juno is scheduled to launch aboard an Atlas V rocket from Cape Canaveral, Fla. Aug. 5. For more information visit, www.nasa.gov/juno. Photo credit: NASA/Jack Pfaller    It will splash down into the Atlantic Ocean where the ship and its crew will recover it and tow it back through Port Canaveral for refurbishing for another launch. The STS-124 mission is the second of three flights launching components to complete the Japan Aerospace Exploration Agency's Kibo laboratory. The shuttle crew will install Kibo's large Japanese Pressurized Module and its remote manipulator system, or RMS. Photo credit: USA/Jeff Suter KSC-2011-2821

CAPE CANAVERAL, Fla. -- Technicians in the Astrotech payload processin...

CAPE CANAVERAL, Fla. -- Technicians in the Astrotech payload processing facility in Titusville, Fla. install thermal insulation on NASA's Juno magnetometer boom. The boom structure is attached to Juno's solar a... More

KENNEDY SPACE CENTER, FLA. --  Space Shuttle Atlantis, mounted on a mobile launch platform atop a crawler transporter, begins the climb to the top of Launch Pad 39A.  First motion of the shuttle out of the Vehicle Assembly Building was at 5:02 a.m. EDT. In late February, while Atlantis was on the launch pad, Atlantis' external tank received hail damage during a severe thunderstorm that passed through the Kennedy Space Center Launch Complex 39 area. The hail caused visible divots in the giant tank's foam insulation, as well as minor surface damage to about 26 heat shield tiles on the shuttle's left wing. The shuttle was returned to the VAB for repairs. The launch of Space Shuttle Atlantis on mission STS-117 is now targeted for June 8. A flight readiness review will be held on May 30 and 31.  Photo credit: NASA/Jim Grossmann KSC-07pd1192

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis, mounted on a mo...

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis, mounted on a mobile launch platform atop a crawler transporter, begins the climb to the top of Launch Pad 39A. First motion of the shuttle out of the Vehi... More

KENNEDY SPACE CENTER, FLA. --   As it rolls back to the Vehicle Assembly Building, Space Shuttle Atlantis, atop the mobile launcher platform, is framed in the photo by winter-stripped branches topped by spring blossoms.  In the VAB, the shuttle will be examined for hail damage. A severe thunderstorm with golf ball-sized hail caused divots in the giant tank's foam insulation and minor surface damage to about 26 heat shield tiles on the shuttle's left wing. Further evaluation of the tank is necessary to get an accurate accounting of foam damage and determine the type of repair required and the time needed for that work.  A new target launch date has not been determined, but teams will focus on preparing Atlantis for liftoff in late April.  Photo credit: NASA/Amanda Diller KSC-07pd0562

KENNEDY SPACE CENTER, FLA. -- As it rolls back to the Vehicle Assemb...

KENNEDY SPACE CENTER, FLA. -- As it rolls back to the Vehicle Assembly Building, Space Shuttle Atlantis, atop the mobile launcher platform, is framed in the photo by winter-stripped branches topped by spring ... More

KENNEDY SPACE CENTER, FLA. -  At the SRB Assembly and Refurbishment Facility, STS-114 Mission Specialists Andrew Thomas (center) and Charles Camarda (right) look at a test panel of insulation material (left) cut in a liquid nitrogen process and a round aft heat seal (right) also treated in a liquid nitrogen process. At left is Mike Leppert, Manufacturing Operations project lead with United Space Alliance.  The crew is at KSC for familiarization with Shuttle and mission equipment. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment, plus the external stowage platform, to the International Space Station. KSC-04pd0388

KENNEDY SPACE CENTER, FLA. - At the SRB Assembly and Refurbishment Fa...

KENNEDY SPACE CENTER, FLA. - At the SRB Assembly and Refurbishment Facility, STS-114 Mission Specialists Andrew Thomas (center) and Charles Camarda (right) look at a test panel of insulation material (left) cu... More

CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, technicians are documenting the installation of radius blocks to space shuttle Discovery's external fuel tank's support beams known as "stringers" near the intertank’s thrust panel area.            The thrust panel is where the tank meets the two solid rocket boosters and sees the most stress during the flight into orbit. After the modifications and additional scans of the stringers are complete, foam insulation will be re-applied. Discovery's next launch opportunity to the International Space Station on the STS-133 mission is targeted for liftoff Feb. 24. For more information on STS-133, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts133/. Photo credit: NASA/Jack Pfaller KSC-2011-1072

CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building at NASA’s Ken...

CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, technicians are documenting the installation of radius blocks to space shuttle Discovery's external fuel tank'... More

KENNEDY SPACE CENTER, FLA.  -- In the Vehicle Assembly Building, United Space Alliance technicians Brenda Morris and Brian Williams are applying foam and molds on Space Shuttle Atlantis' external tank to areas damaged by hail.  The white hole with a red circle around it  (upper right) is a hole prepared for molding and material application. The red material is sealant tape so the mold doesn't leak when the foam rises against the mold. The white/translucent square mold is an area where the foam has been applied and the foam has risen and cured against the mold surface.   In late February, Atlantis' external tank received hail damage during a severe thunderstorm that passed through the Kennedy Space Center Launch Complex 39 area. The hail caused visible divots in the giant tank's foam insulation as well as minor surface damage to about 26 heat shield tiles on the shuttle's left wing.   The March launch was postponed and has not yet been rescheduled due to the repair process.  Photo credit: NASA/George Shelton KSC-07pd0849

KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building, Unite...

KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building, United Space Alliance technicians Brenda Morris and Brian Williams are applying foam and molds on Space Shuttle Atlantis' external tank to areas ... More

CAPE CANAVERAL, Fla. -- A technician takes computed radiography scans of space shuttle Discovery's external fuel tank. The shuttle stack, consisting of the shuttle, external tank and solid rocket boosters, was moved from Launch Pad 39A to the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida so technicians could examine 21-foot-long support beams, called stringers, on the outside of the tank's intertank and re-apply foam insulation.      Discovery's next launch opportunity to the International Space Station on the STS-133 mission is no earlier than Feb. 3, 2011. For more information on STS-133, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts133/. Photo credit: NASA/Frankie Martin KSC-2010-5959

CAPE CANAVERAL, Fla. -- A technician takes computed radiography scans ...

CAPE CANAVERAL, Fla. -- A technician takes computed radiography scans of space shuttle Discovery's external fuel tank. The shuttle stack, consisting of the shuttle, external tank and solid rocket boosters, was ... More

KENNEDY SPACE CENTER, FLA. -  In the SRB Assembly and Refurbishment Facility,  STS-114 crew members look at test designs of the bolt catcher insulation.  Starting from left are Mission Specialists Stephen Robinson, Andrew Thomas and Soichi Noguchi; and Commander Eileen Collins.  The STS-114 crew is at KSC for familiarization with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment, plus the external stowage platform, to the International Space Station. KSC-04pd0518

KENNEDY SPACE CENTER, FLA. - In the SRB Assembly and Refurbishment Fa...

KENNEDY SPACE CENTER, FLA. - In the SRB Assembly and Refurbishment Facility, STS-114 crew members look at test designs of the bolt catcher insulation. Starting from left are Mission Specialists Stephen Robin... More

KENNEDY SPACE CENTER, FLA. --  Under a feather-painted sky, Space Shuttle Atlantis, mounted on a mobile launch platform atop a crawler transporter, creeps up the ramp to Launch Pad 39A.  This is the second rollout for the shuttle.  First motion out of the Vehicle Assembly Building was at 5:02 a.m. EDT. In late February, while Atlantis was on the launch pad, Atlantis' external tank received hail damage during a severe thunderstorm that passed through the Kennedy Space Center Launch Complex 39 area. The hail caused visible divots in the giant tank's foam insulation, as well as minor surface damage to about 26 heat shield tiles on the shuttle's left wing. The shuttle was returned to the VAB for repairs. The launch of Space Shuttle Atlantis on mission STS-117 is now targeted for June 8. A flight readiness review will be held on May 30 and 31.  Photo credit: NASA/Troy Cryder KSC-07pd1196

KENNEDY SPACE CENTER, FLA. -- Under a feather-painted sky, Space Shut...

KENNEDY SPACE CENTER, FLA. -- Under a feather-painted sky, Space Shuttle Atlantis, mounted on a mobile launch platform atop a crawler transporter, creeps up the ramp to Launch Pad 39A. This is the second roll... More

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, heat lamps assist United Space Alliance technician Jeff Holmes in a putty repair on some of the high-temperature reusable surface insulation tiles, or HRSI tiles, on the lower forward fuselage of space shuttle Atlantis.    An average of 125 tiles are replaced after each mission either due to handling damage or accumulated repairs.  These black tiles are optimized for maximum emissivity, which means they lose heat faster than white tiles.  This property is required to maximize heat rejection during the hot phase of reentry.  Atlantis next is slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission.  Launch is targeted for May 14, 2010.  Photo credit: NASA/Jack Pfaller KSC-2009-6812

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's ...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, heat lamps assist United Space Alliance technician Jeff Holmes in a putty repair on some of the high-temper... More

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida,  United Space Alliance technician Jeff Holmes makes a putty repair on some of the high-temperature reusable surface insulation tiles, or HRSI tiles, on the lower forward fuselage of space shuttle Atlantis.    An average of 125 tiles are replaced after each mission either due to handling damage or accumulated repairs.  These black tiles are optimized for maximum emissivity, which means they lose heat faster than white tiles.  This property is required to maximize heat rejection during the hot phase of reentry.  Atlantis next is slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission.  Launch is targeted for May 14, 2010.  Photo credit: NASA/Jack Pfaller KSC-2009-6810

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's ...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technician Jeff Holmes makes a putty repair on some of the high-temperature reusable... More

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia, atop its Mobile Launcher Platform, inches its way along the path to Launch Pad 39A. Columbia is scheduled to be launched Feb. 28 on mission STS-109, a Hubble Servicing Mission. The goal of the mission is to replace Solar Array 2 with Solar Array 3, replace the Power Control Unit, remove the Faint Object Camera and install the ACS, install the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cooling System, and install New Outer Blanket Layer insulation.  The launch will be the first for Columbia after returning from California where it underwent extensive maintenance, inspections and enhancements. More than 100 upgrades make Columbia safer and more reliable than ever before KSC-02pd0047

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia, atop its Mobile ...

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia, atop its Mobile Launcher Platform, inches its way along the path to Launch Pad 39A. Columbia is scheduled to be launched Feb. 28 on mission STS-109, a Hubbl... More

KENNEDY SPACE CENTER, FLA. --   Seen from behind the mobile launcher platform, the orange external tank and solid rocket boosters all but hide Atlantis.  The crawlerway stretches in a curve on the other side.  The shuttle is being rolled back to the Vehicle Assembly Building where it will be examined for hail damage.  A severe thunderstorm with golf ball-sized hail caused divots in the giant tank's foam insulation and minor surface damage to about 26 heat shield tiles on the shuttle's left wing. Further evaluation of the tank is necessary to get an accurate accounting of foam damage and determine the type of repair required and the time needed for that work.  A new target launch date has not been determined, but teams will focus on preparing Atlantis for liftoff in late April.  Photo credit: NASA/Amanda Diller KSC-07pd0554

KENNEDY SPACE CENTER, FLA. -- Seen from behind the mobile launcher p...

KENNEDY SPACE CENTER, FLA. -- Seen from behind the mobile launcher platform, the orange external tank and solid rocket boosters all but hide Atlantis. The crawlerway stretches in a curve on the other side. ... More

CAPE CANAVERAL, Fla. -- Repair work to space shuttle Discovery's external fuel tank continues in the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. Technicians are modifying 94 support beams, called stringers, on the tank's intertank region by fitting pieces of metal, called radius blocks, over the stringers' edges. After the modifications of the stringers are complete, foam insulation will be re-applied to the tank.          Discovery's next launch opportunity to the International Space Station on the STS-133 mission is targeted for Feb. 24, 2011. For more information on STS-133, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts133/. Photo credit: NASA/Kim Shiflett KSC-2011-1122

CAPE CANAVERAL, Fla. -- Repair work to space shuttle Discovery's exter...

CAPE CANAVERAL, Fla. -- Repair work to space shuttle Discovery's external fuel tank continues in the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. Technicians are modifying 94 support bea... More

SMALL TEST FACILITY IN INSULATION ASSEMBLY AREA

SMALL TEST FACILITY IN INSULATION ASSEMBLY AREA

The original finding aid described this as: Capture Date: 9/25/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

HANDLING FIXTURE AND INSULATION TEST RIG IN THE ROCKET OPERATIONS BUILDING ROB BASEMENT

HANDLING FIXTURE AND INSULATION TEST RIG IN THE ROCKET OPERATIONS BUIL...

The original finding aid described this as: Capture Date: 4/4/1974 Photographer: MARTIN BROWN Keywords: Larsen Scan Location Building No: 100 Location Room: BASEMENT Photographs Relating to Agency Activiti... More

CALORIMETER - EDGE GUARD - INSULATION BLANKET

CALORIMETER - EDGE GUARD - INSULATION BLANKET

The original finding aid described this as: Capture Date: 10/22/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

HANDLING FIXTURE AND INSULATION TEST RIG IN THE ROCKET OPERATIONS BUILDING ROB BASEMENT

HANDLING FIXTURE AND INSULATION TEST RIG IN THE ROCKET OPERATIONS BUIL...

The original finding aid described this as: Capture Date: 4/4/1974 Photographer: MARTIN BROWN Keywords: Larsen Scan Location Building No: 100 Location Room: BASEMENT Photographs Relating to Agency Activiti... More

CALORIMETER - EDGE GUARD - INSULATION BLANKET

CALORIMETER - EDGE GUARD - INSULATION BLANKET

The original finding aid described this as: Capture Date: 10/22/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

INSULATION BLANKETS TEST PACKAGE, NASA Technology Images

INSULATION BLANKETS TEST PACKAGE, NASA Technology Images

The original finding aid described this as: Capture Date: 1/8/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

CALORIMETER - EDGE GUARD - INSULATION BLANKET

CALORIMETER - EDGE GUARD - INSULATION BLANKET

The original finding aid described this as: Capture Date: 10/22/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

CALORIMETER - EDGE GUARD - INSULATION BLANKET

CALORIMETER - EDGE GUARD - INSULATION BLANKET

The original finding aid described this as: Capture Date: 10/22/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

SMALL TEST FACILITY IN INSULATION ASSEMBLY AREA

SMALL TEST FACILITY IN INSULATION ASSEMBLY AREA

The original finding aid described this as: Capture Date: 9/25/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

INSULATION BLANKETS TEST PACKAGE, NASA Technology Images

INSULATION BLANKETS TEST PACKAGE, NASA Technology Images

The original finding aid described this as: Capture Date: 1/8/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

SMALL TEST FACILITY IN INSULATION ASSEMBLY AREA

SMALL TEST FACILITY IN INSULATION ASSEMBLY AREA

The original finding aid described this as: Capture Date: 9/25/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

INSULATION BLANKETS TEST PACKAGE, NASA Technology Images

INSULATION BLANKETS TEST PACKAGE, NASA Technology Images

The original finding aid described this as: Capture Date: 1/8/1974 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

HANDLING FIXTURE AND INSULATION TEST RIG IN THE ROCKET OPERATIONS BUILDING ROB BASEMENT

HANDLING FIXTURE AND INSULATION TEST RIG IN THE ROCKET OPERATIONS BUIL...

The original finding aid described this as: Capture Date: 4/4/1974 Photographer: MARTIN BROWN Keywords: Larsen Scan Location Building No: 100 Location Room: BASEMENT Photographs Relating to Agency Activiti... More

PROPOSED INSULATION MONITORING PROGRAM, NASA Technology Images

PROPOSED INSULATION MONITORING PROGRAM, NASA Technology Images

The original finding aid described this as: Capture Date: 6/3/1975 Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

DAMAGED FOAM INSULATION ON LIQUID NITROGEN LN2 PIPING ON ROOF

DAMAGED FOAM INSULATION ON LIQUID NITROGEN LN2 PIPING ON ROOF

The original finding aid described this as: Capture Date: 5/4/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Location Building No: 16 Photographs Relating to Agency Activities, Facilities and Personnel

MULTILAYER INSULATION PANEL, NASA Technology Images

MULTILAYER INSULATION PANEL, NASA Technology Images

The original finding aid described this as: Capture Date: 1/20/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

MULTILAYER INSULATION PANEL, NASA Technology Images

MULTILAYER INSULATION PANEL, NASA Technology Images

The original finding aid described this as: Capture Date: 1/20/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

DAMAGED FOAM INSULATION ON LIQUID NITROGEN LN2 PIPING ON ROOF

DAMAGED FOAM INSULATION ON LIQUID NITROGEN LN2 PIPING ON ROOF

The original finding aid described this as: Capture Date: 5/4/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Location Building No: 16 Photographs Relating to Agency Activities, Facilities and Personnel

DAMAGED FOAM INSULATION ON LIQUID NITROGEN LN2 PIPING ON ROOF

DAMAGED FOAM INSULATION ON LIQUID NITROGEN LN2 PIPING ON ROOF

The original finding aid described this as: Capture Date: 5/4/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Location Building No: 16 Photographs Relating to Agency Activities, Facilities and Personnel

DAMAGED FOAM INSULATION ON LIQUID NITROGEN LN2 PIPING ON ROOF

DAMAGED FOAM INSULATION ON LIQUID NITROGEN LN2 PIPING ON ROOF

The original finding aid described this as: Capture Date: 5/4/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Location Building No: 16 Photographs Relating to Agency Activities, Facilities and Personnel

Artist: Rick Guidice NASA artwork of Space Shuttle Orbiter during re-entry showing Reusable Surface Insulation Tiles.  (Text overlay) ARC-1976-AC76-1713

Artist: Rick Guidice NASA artwork of Space Shuttle Orbiter during re-e...

Artist: Rick Guidice NASA artwork of Space Shuttle Orbiter during re-entry showing Reusable Surface Insulation Tiles. (Text overlay)

REAR INSULATION BOXES OF THE NOCT TEST OF THE PHOTOVOLTAIC SOLAR ARRAY

REAR INSULATION BOXES OF THE NOCT TEST OF THE PHOTOVOLTAIC SOLAR ARRAY

The original finding aid described this as: Capture Date: 11/2/1977 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

H MARK WITH INSULATION, NASA Technology Images

H MARK WITH INSULATION, NASA Technology Images

The original finding aid described this as: Capture Date: 6/1/1977 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

REAR INSULATION BOXES OF THE NOCT TEST OF THE PHOTOVOLTAIC SOLAR ARRAY

REAR INSULATION BOXES OF THE NOCT TEST OF THE PHOTOVOLTAIC SOLAR ARRAY

The original finding aid described this as: Capture Date: 11/2/1977 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

1 INCH DIAMETER PIPE - INSULATION COLOR CHANGE - REFLOX RIG

1 INCH DIAMETER PIPE - INSULATION COLOR CHANGE - REFLOX RIG

The original finding aid described this as: Capture Date: 2/17/1978 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

TUBE TESTING ASSEMBLY WITH INSULATION

TUBE TESTING ASSEMBLY WITH INSULATION

The original finding aid described this as: Capture Date: 1/30/1978 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

TUBE TESTING ASSEMBLY WITH INSULATION

TUBE TESTING ASSEMBLY WITH INSULATION

The original finding aid described this as: Capture Date: 1/30/1978 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

1 INCH DIAMETER PIPE - INSULATION COLOR CHANGE - REFLOX RIG

1 INCH DIAMETER PIPE - INSULATION COLOR CHANGE - REFLOX RIG

The original finding aid described this as: Capture Date: 2/17/1978 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

1 INCH DIAMETER PIPE - INSULATION COLOR CHANGE - REFLOX RIG

1 INCH DIAMETER PIPE - INSULATION COLOR CHANGE - REFLOX RIG

The original finding aid described this as: Capture Date: 2/17/1978 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

PROPER INSULATION - SUPER INSULATION, NASA Technology Images

PROPER INSULATION - SUPER INSULATION, NASA Technology Images

The original finding aid described this as: Capture Date: 7/9/1979 Photographer: JACK DARGINSKY Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

STS050-208-023 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-023 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-030 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-030 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-009 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-009 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-034 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-034 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-026 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-026 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-017 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-017 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-001 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-001 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-004 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-004 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-019 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-019 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-013 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-013 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-032 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-032 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-026 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-026 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-019 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-019 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-031 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-031 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-032 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-032 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-015 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-015 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-005 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-005 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-015 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-015 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-036 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-036 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-002 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-002 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-003 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-003 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-030 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-030 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-023 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-023 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-006 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-006 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-012 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-012 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-024 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-024 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-008 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-008 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-027 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-027 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-010 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-010 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-011 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-011 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-035 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-035 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-025 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-025 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-032 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-032 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-031 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-031 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-029 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-029 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-027 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-027 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-011 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-011 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-022 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-022 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-009 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-009 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-028 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-028 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-034 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-034 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-013 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-013 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-024 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-024 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-233-017 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-233-017 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-002 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-002 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-208-012 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-208-012 - STS-050 - Wire Insulation Flammability Experiment Ima...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-005 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-005 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

STS050-258A-013 - STS-050 - Wire Insulation Flammability Experiment Imagery from the experiment camera.

STS050-258A-013 - STS-050 - Wire Insulation Flammability Experiment Im...

The original finding aid described this as: Description: Wire Insulation Flammability Experiment Imagery from the self contained experiment camera in the Spacelab Glovebox, rack # 10. Each scene contains a str... More

Previous

of 11

Next