Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: Ansicht des hinteren Endes des Orbiters, mit der Spitze des Spacelab-Moduls im Vordergrund.

Similar

STS-131 - EOM - Public domain NASA photogrpaph

STS-131 - EOM - Public domain NASA photogrpaph

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA’s Kennedy Space Center in Florida, three replica shuttle main engines RSMEs have been installed on the space shuttle Atlantis. The orbiter is surrounded by work platforms allowing access to all areas of the spacecraft. Three RSMEs were installed on Atlantis. The replicas were built in the Pratt & Whitney Rocketdyne engine shop at KSC to replace the space shuttle main engines SSMEs which will be placed in storage to support NASA's Space Launch System currently under development. The RSME installation is part of the Space Shuttle Program’s transition and retirement processing of the space shuttle fleet. A groundbreaking was held Jan. 18, 2012 for Atlantis’ future home, a 65,000-square-foot exhibit hall in Shuttle Plaza at the Kennedy Space Center Visitor Complex. Atlantis is scheduled to roll over to the visitor complex during November in preparation for the exhibit’s grand opening in July 2013. For more information, visit http://www.nasa.gov/transition. Photo credit: NASA/Glenn Benson KSC-2012-3509

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA’s Kennedy Space Center in Florida, three replica shuttle main engines RSMEs have been installed on the space shuttle Atlantis. The orbiter is surrounded by work platforms allowing access to all areas of the spacecraft. Three RSMEs were installed on Atlantis. The replicas were built in the Pratt & Whitney Rocketdyne engine shop at KSC to replace the space shuttle main engines SSMEs which will be placed in storage to support NASA's Space Launch System currently under development. The RSME installation is part of the Space Shuttle Program’s transition and retirement processing of the space shuttle fleet. A groundbreaking was held Jan. 18, 2012 for Atlantis’ future home, a 65,000-square-foot exhibit hall in Shuttle Plaza at the Kennedy Space Center Visitor Complex. Atlantis is scheduled to roll over to the visitor complex during November in preparation for the exhibit’s grand opening in July 2013. For more information, visit http://www.nasa.gov/transition. Photo credit: NASA/Glenn Benson KSC-2012-3509

Aviation Structural Mechanic Airman Kevin Richardson, assigned to the

Aviation Structural Mechanic Airman Kevin Richardson, assigned to the

CONFIGURATION AND INSTALLATION OF 5.5 INCH SONIC INLET IN THE 9X15 FOOT WIND TUNNEL

CONFIGURATION AND INSTALLATION OF 5.5 INCH SONIC INLET IN THE 9X15 FOOT WIND TUNNEL

CAPE CANAVERAL, Fla. -- Center Director Bob Cabana (right) speaks with a worker in Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, as shuttle Atlantis is being prepared for it move to the Vehicle Assembly Building (VAB). The move called "rollover" is a major milestone in processing for the STS-135 mission to the International Space Station. Inside the VAB, the shuttle will be attached to its external fuel tank and solid rocket boosters. Commander Chris Ferguson, Pilot Doug Hurley and Mission Specialists Sandra Magnus and Rex Walheim are expected to launch in mid July, taking with them the Raffaello multipurpose logistics module packed with supplies, logistics and spare parts. The STS-135 mission also will fly a system to investigate the potential for robotically refueling existing spacecraft and return a failed ammonia pump module to help NASA better understand the failure mechanism and improve pump designs for future systems. STS-135 will be the 33rd flight of Atlantis, the 37th shuttle mission to the space station, and the 135th and final mission of NASA's Space Shuttle Program. For more information visit, www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts135/index.html. Photo credit: NASA/Dimitri Gerondidakis KSC-2011-3666

CAPE CANAVERAL, Fla. -- Center Director Bob Cabana (right) speaks with a worker in Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, as shuttle Atlantis is being prepared for it move to the Vehicle Assembly Building (VAB). The move called "rollover" is a major milestone in processing for the STS-135 mission to the International Space Station. Inside the VAB, the shuttle will be attached to its external fuel tank and solid rocket boosters. Commander Chris Ferguson, Pilot Doug Hurley and Mission Specialists Sandra Magnus and Rex Walheim are expected to launch in mid July, taking with them the Raffaello multipurpose logistics module packed with supplies, logistics and spare parts. The STS-135 mission also will fly a system to investigate the potential for robotically refueling existing spacecraft and return a failed ammonia pump module to help NASA better understand the failure mechanism and improve pump designs for future systems. STS-135 will be the 33rd flight of Atlantis, the 37th shuttle mission to the space station, and the 135th and final mission of NASA's Space Shuttle Program. For more information visit, www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts135/index.html. Photo credit: NASA/Dimitri Gerondidakis KSC-2011-3666

Mapping Sequence performed during the STS-134 R-Bar Pitch Maneuver

Mapping Sequence performed during the STS-134 R-Bar Pitch Maneuver

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: Ansicht des hinteren Endes des Orbiters, mit der Spitze des Spacelab-Moduls im Vordergrund.

description

Zusammenfassung

Fachbegriffe: STS-9, Spacelab, Columbia (Orbiter), Bays (Structural Units)

Kategorien: Stationskonfiguration

Interieur _ Exterieur: Interieur

Ground _ Orbit: Auf der Umlaufbahn

Original: Film - 35MM CN

Preservation File Format: TIFF
STS-9 S09-201-3313 - STS-009 - Spacelab-Modul und achterem Orbiter während STS-9 Die OMS-Kapseln und der vertikale Stabilisator sind hinter dem Spacelab sichtbar. Das Bild wurde während der Mission STS-9 Spacelab 1 aufgenommen. Flugdaten: 28 / 11 / 1983 bis 08 / 12 / 1983.

label_outline

Tags

spacelab
Modul
spacelab-Modul
Orbiter
NASA
Maschen 9
sts 9 kolumbien
Space Shuttle Kolumbien
hohe Auflösung
sts 9 spacelab
tiff sts 9
Oms-Pods
Flugdaten
Struktureinheiten
Stationskonfiguration
Weltraumprogramm
1980
Space Shuttle
uns Nationalarchive
date_range

Datum

1983
create

Quelle

The U.S. National Archives
link

Link

https://catalog.archives.gov/
copyright

Copyright-info

No known copyright restrictions

Explore more

spacelab
spacelab
module
Modul
spacelab module
spacelab-Modul
orbiter
Orbiter
nasa
NASA
sts 9
Maschen 9
sts 9 columbia
sts 9 kolumbien
space shuttle columbia
Space Shuttle Kolumbien
high resolution
hohe Auflösung
sts 9 spacelab
sts 9 spacelab
tiff sts 9
tiff sts 9
oms pods
Oms-Pods
flight dates
Flugdaten
structural units
Struktureinheiten
station configuration
Stationskonfiguration
space program
Weltraumprogramm
1980 s
1980
space shuttle
Space Shuttle
us national archives
uns Nationalarchive