S101E5123 - STS-101 - PLT Horowitz at airlock hatch

Similar

CAPE CANAVERAL, Fla. -- The heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule are in a Keith thermal automation oven in the Thermal Protection System Facility at NASA's Kennedy Space Center in Florida. Inside the oven, the tiles will be baked at 2,200 degrees F to cure their ceramic coating. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1575

CAPE CANAVERAL, Fla. -- The heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule are in a Keith thermal automation oven in the Thermal Protection System Facility at NASA's Kennedy Space Center in Florida. Inside the oven, the tiles will be baked at 2,200 degrees F to cure their ceramic coating. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1575

S06-10-413 - STS-006 - Trash and debris on onboard equipment filter screens

S06-10-413 - STS-006 - Trash and debris on onboard equipment filter screens

HYPERSONIC TEST FACILITY LINER DAMAGE AT NASA PLUM BROOK STATION

HYPERSONIC TEST FACILITY LINER DAMAGE AT NASA PLUM BROOK STATION

KENNEDY SPACE CENTER, FLA. -- At a lab at NASA's Kennedy Space Center, Bob Arp, an aerospace technician with the United Launch Alliance, solders a pin to the socket of the replacement feed-through connector that will be installed in the external fuel tank for space shuttle Atlantis' STS-122 mission. The technician performed this exacting task on the Centaur upper stage for Atlas and Titan launches in 1994 and was specifically chosen for the task. Soldering the connector pins and sockets together addresses the most likely cause of a problem in the engine cutoff sensor system, or ECO system. Some of the tank's ECO sensors failed during propellant tanking for launch attempts on Dec. 6 and Dec. 9. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The feed-through connector passes the wires from the inside of the tank to the outside. After the soldering is completed and the connector is reinstalled, shuttle program managers will decide on how to proceed. The launch date for mission STS-122 is under review. Photo credit: NASA/Kim Shiflett KSC-08pd0006

KENNEDY SPACE CENTER, FLA. -- At a lab at NASA's Kennedy Space Center, Bob Arp, an aerospace technician with the United Launch Alliance, solders a pin to the socket of the replacement feed-through connector that will be installed in the external fuel tank for space shuttle Atlantis' STS-122 mission. The technician performed this exacting task on the Centaur upper stage for Atlas and Titan launches in 1994 and was specifically chosen for the task. Soldering the connector pins and sockets together addresses the most likely cause of a problem in the engine cutoff sensor system, or ECO system. Some of the tank's ECO sensors failed during propellant tanking for launch attempts on Dec. 6 and Dec. 9. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The feed-through connector passes the wires from the inside of the tank to the outside. After the soldering is completed and the connector is reinstalled, shuttle program managers will decide on how to proceed. The launch date for mission STS-122 is under review. Photo credit: NASA/Kim Shiflett KSC-08pd0006

Boatswain's Mates 3rd Class Quentin Rucker and Patricia

Boatswain's Mates 3rd Class Quentin Rucker and Patricia

Navy Ship Auter 1 and 2 - Public domain photogrpaph

Navy Ship Auter 1 and 2 - Public domain photogrpaph

S101E5123 - STS-101 - PLT Horowitz at airlock hatch

description

Summary

The original finding aid described this as:

Description: Astronaut Scott J. Horowitz, pilot, is pictured at the airlock hatch through which the STS-101 mission's two space-walking astronauts passed upon completion of a 6-hour, 44-minute extravehicular activity (EVA).

Subject Terms: HATCHES, AIR LOCKS, ASTRONAUTS, ONBOARD ACTIVITIES, STS-101, ATLANTIS (ORBITER)

Date Taken: 5/22/2000

Categories: Crew Activities

Interior_Exterior: Interior

Ground_Orbit: On-orbit

Original: Digital Still

Preservation File Format: TIFF
STS-101

label_outline

Tags

plt
horowitz
plt horowitz
airlock
hatch
astronauts
sts 101 atlantis
nasa
airlock hatch
sts 101
tiff sts 101
astronaut scott
extravehicular activity
onboard activities
crew activities
hatches
air locks
space program
date_range

Date

2000
create

Source

The U.S. National Archives
link

Link

https://catalog.archives.gov/
copyright

Copyright info

No known copyright restrictions

Explore more

plt
plt
horowitz
horowitz
plt horowitz
plt horowitz
airlock
airlock
hatch
hatch
astronauts
astronauts
sts 101 atlantis
sts 101 atlantis
nasa
nasa
airlock hatch
airlock hatch
sts 101
sts 101
tiff sts 101
tiff sts 101
astronaut scott
astronaut scott
extravehicular activity
extravehicular activity
onboard activities
onboard activities
crew activities
crew activities
hatches
hatches
air locks
air locks
space program
space program