forklift

kennedy space center

nasa

orbiter

space shuttle

cape canaveral

engine

hyster forklift

hyster

220 media by topic ∙ page 1 of 3
CAPE CANAVERAL, Fla. -- A Hyster forklift moves NASA's Juno spacecraft into Astrotech's payload processing facility in Titusville, Fla. to begin final testing and preparations for launch. The solar-powered spacecraft will orbit Jupiter's poles 33 times to find out more about the gas giant's origins, structure, atmosphere and magnetosphere and investigate the existence of a solid planetary core. Juno is scheduled to launch aboard an Atlas V rocket from Cape Canaveral, Fla. Aug. 5. For more information visit, www.nasa.gov/juno. Photo credit: NASA/Jack Pfaller It will splash down into the Atlantic Ocean where the ship and its crew will recover it and tow it back through Port Canaveral for refurbishing for another launch. The STS-124 mission is the second of three flights launching components to complete the Japan Aerospace Exploration Agency's Kibo laboratory. The shuttle crew will install Kibo's large Japanese Pressurized Module and its remote manipulator system, or RMS. Photo credit: USA/Jeff Suter KSC-2011-2818

CAPE CANAVERAL, Fla. -- A Hyster forklift moves NASA's Juno spacecraft...

CAPE CANAVERAL, Fla. -- A Hyster forklift moves NASA's Juno spacecraft into Astrotech's payload processing facility in Titusville, Fla. to begin final testing and preparations for launch. The solar-power... More

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility bay 2, technicians on the Hyster forklift maneuver main engine 1 for installation on space shuttle Endeavour. The scheduled launch vehicle for the STS-126 mission, Endeavour will deliver a multi-purpose logistics module to the International Space Station. Launch is targeted for Nov. 10. Endeavour is also the backup shuttle, if needed for rescue, for the STS-125 mission in October that will make repairs on the Hubble Space Telescope. For that purpose, it is designated STS-400. Photo credit: NASA/Jim Grossmann KSC-08pd1848

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility bay 2, tec...

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility bay 2, technicians on the Hyster forklift maneuver main engine 1 for installation on space shuttle Endeavour. The scheduled launch vehicle for the ST... More

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians on a Hyster forklift guide replica shuttle main engine 2, or RSME 2, closer for installation on space shuttle Endeavour. The orbiter is surrounded by work platforms allowing access to all areas of the spacecraft. The work is part of Transition and Retirement of the remaining space shuttles, Endeavour and Atlantis. Endeavour is being prepared for public display at the California Science Center in Los Angeles. Its ferry flight to California is targeted for mid-September. Endeavour was the last space shuttle added to NASA’s orbiter fleet. Over the course of its 19-year career, Endeavour spent 299 days in space during 25 missions. For more information, visit http://www.nasa.gov/shuttle. Photo credit: NASA/David Lee KSC-2012-3826

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s ...

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians on a Hyster forklift guide replica shuttle main engine 2, or RSME 2, clos... More

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, technicians carefully remove engine No. 2, one of three space shuttle main engines from Endeavour, using a specially designed engine installer, called a Hyster forklift. The removal is part of Endeavour's transition and retirement processing. Endeavour is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122,883,151 miles over the course of its 19-year career. Photo credit: NASA/Jim Grossmann KSC-2011-4539

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Ken...

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, technicians carefully remove engine No. 2, one of three space shuttle main engines from Endeavour, using a spe... More

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, technicians remove engine No. 1, one of three space shuttle main engines from shuttle Endeavour using a specially designed engine installer, called a Hyster forklift. The work is part of Endeavour's transition and retirement processing. The spacecraft is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122,883,151 miles over the course of its 19-year career. Endeavour's STS-134 and final mission was completed after landing on June 1, 2011. Photo credit: NASA/Chris Chamberland KSC-2011-4695

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Ken...

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, technicians remove engine No. 1, one of three space shuttle main engines from shuttle Endeavour using a specia... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-1 at NASA’s Kennedy Space Center in Florida, technicians sitting on the Hyster forklift monitor the progress as they guide replica shuttle main engine RSME number 1 toward space shuttle Atlantis. Three RSMEs will be installed on Atlantis. The work is part of the Space Shuttle Program’s transition and retirement processing of the space shuttle fleet. A groundbreaking was held Jan. 18 for Atlantis’ future home, a 65,000-square-foot exhibit hall in Shuttle Plaza at the Kennedy Space Center Visitor Complex. Atlantis is scheduled to roll over to the visitor complex in November in preparation for the exhibit’s grand opening in July 2013. For more information, visit http://www.nasa.gov/transition. Photo credit: NASA/Jim Grossmann KSC-2012-3458

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-1 at NASA’s Kenn...

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-1 at NASA’s Kennedy Space Center in Florida, technicians sitting on the Hyster forklift monitor the progress as they guide replica shuttle main engine RSME ... More

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, a Hyster forklift moves the second of three space shuttle main engines closer to shuttle Atlantis for installation. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. This is the final planned engine installation for the Space Shuttle Program. Atlantis is being prepared for the "launch on need," or potential rescue mission, for the final planned shuttle flight, Endeavour's STS-134 mission. For more information, visit www.nasa.gov/shuttle. Photo credit: NASA/Kim Shiflett KSC-2010-5813

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Ken...

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, a Hyster forklift moves the second of three space shuttle main engines closer to shuttle Atlantis for installa... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift remove main engine no. 2 from space shuttle Endeavour. Engine removal is part of the post-landing processing. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4702

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift remove main engine no. 2 from space shuttle Endeavour. Engine removal is part o... More

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians monitor the progress as a Hyster forklift moves replica shuttle main engine 2, or RSME 2, closer for installation on space shuttle Endeavour. The orbiter is surrounded by work platforms allowing access to all areas of the spacecraft. The work is part of Transition and Retirement of the remaining space shuttles, Endeavour and Atlantis. Endeavour is being prepared for public display at the California Science Center in Los Angeles. Its ferry flight to California is targeted for mid-September. Endeavour was the last space shuttle added to NASA’s orbiter fleet. Over the course of its 19-year career, Endeavour spent 299 days in space during 25 missions. For more information, visit http://www.nasa.gov/shuttle. Photo credit: NASA/David Lee KSC-2012-3823

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s ...

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians monitor the progress as a Hyster forklift moves replica shuttle main engi... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift have removed main engine no. 2 from space shuttle Endeavour. Engine removal is part of the post-landing processing. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4705

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift have removed main engine no. 2 from space shuttle Endeavour. Engine removal is ... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians begin removing main engine no. 1 from space shuttle Endeavour with the Hyster forklift. Engine removal is part of the post-landing processing; engine no. 2 was removed Aug. 17. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4766

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians begin removing main engine no. 1 from space shuttle Endeavour with the Hyster forklift. Engine removal ... More

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller KSC-2011-2675

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine...

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbit... More

CAPE CANAVERAL, Fla. -- Technicians use a Hyster forklift to transport Engine #3 to the Engine Shop for possible future use after it was removed from space shuttle Atlantis in Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida. Each of the three space shuttle main engines is 14 feet long and weighs 7,800 pounds. Removal of the space shuttle main engines is part of the Transition and Retirement work that is being performed in order to prepare Atlantis for eventual display at the Kennedy Space Center Visitor Complex in Florida. Photo credit: Frankie Martin KSC-2011-6526

CAPE CANAVERAL, Fla. -- Technicians use a Hyster forklift to transport...

CAPE CANAVERAL, Fla. -- Technicians use a Hyster forklift to transport Engine #3 to the Engine Shop for possible future use after it was removed from space shuttle Atlantis in Orbiter Processing Facility-2 at N... More

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians move a Hyster forklift closer to Engine #1, the final engine to be removed from space shuttle Atlantis. The forklift will be used to remove the engine and transport it to the Engine Shop for possible future use. Each of the three space shuttle main engines is 14 feet long and weighs 7,800 pounds. Removal of the space shuttle main engines is part of the Transition and Retirement work that is being performed in order to prepare Atlantis for eventual display at the Kennedy Space Center Visitor Complex in Florida. Photo credit: Frankie Martin KSC-2011-6530

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Ken...

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians move a Hyster forklift closer to Engine #1, the final engine to be removed from space shuttle Atla... More

AIRMAN First Class (A1C) Cayea (driving) backs up a Hyster, Internal Combustion Engine (ICE) Pneumatic, Counterbalance Lift Truck with the help of A1C Sanserfield. Both are from the 4th Supply Squadron, Seymour Johnson AFB, North Carolina, and are deployed to Qatar in support of Operation SOUTHERN WATCH. SOUTHERN WATCH enforces the United Nations Security Council Resolution 688 that establishes a no-fly zone over Southern Iraq below the 32nd parallel

AIRMAN First Class (A1C) Cayea (driving) backs up a Hyster, Internal C...

The original finding aid described this photograph as: Subject Operation/Series: SOUTHERN WATCH Base: Doha Country: Qatar (QAT) Scene Camera Operator: SRA Frank Rizzo, USAF Release Status: Released to Publ... More

CAPE CANAVERAL, Fla. – At the Turn Basin in the Launch Complex 39 area of NASA’s Kennedy Space Center in Florida, parts of the Hyster forklift, a specially designed engine installer used in conjunction with the space shuttle main engines (SSME), are stowed away inside the Pegasus barge, ready for transport for delivery to Stennis Space Center near Bay St. Louis, Miss. Since being delivered to NASA in 1999, Pegasus sailed 41 times and transported 31 shuttle external fuel tanks from Michoud Assembly Facility near New Orleans to Kennedy. The barge will leave Kennedy, perhaps for the final time. Both the barge and shuttle equipment will remain in storage until their specific future uses are determined. The SSMEs themselves will be transported to Stennis separately for use with the agency's new heavy-lift rocket, the Space Launch System. The work is part of the Space Shuttle Program’s transition and retirement processing. For more information about Shuttle Transition and Retirement, visit http://www.nasa.gov/mission_pages/transition/home/index.html. Photo credit: NASA/Cory Huston KSC-2011-7695

CAPE CANAVERAL, Fla. – At the Turn Basin in the Launch Complex 39 area...

CAPE CANAVERAL, Fla. – At the Turn Basin in the Launch Complex 39 area of NASA’s Kennedy Space Center in Florida, parts of the Hyster forklift, a specially designed engine installer used in conjunction with the... More

Aviation Electronic Technician AMN Paul Radke from San Diego, California, loads relief supplies onto an CH-53E helicopter from Helicopter Mine Countermeasure Squadron FIFTEEN (HM 15). Embarked on USS INCHON (MCS 12), HM-15 is operating in the Mediterranean and Adriatic Seas in support of the NATO humanitarion relief effort Operation Shining Hope. Tirana, Albania - ATAN Paul Radke from San Diego, California, drives a Hyster forklift with of relief supplies, which were unloaded from on a MH-53 from HM-15. HM-15 is currently embarked on USS INCHON (not shown) which is operating in the Mediterranean and Adriatic Sea, supporting Operation Shining Hope, a joint, combined NATO and U.S. military...

Aviation Electronic Technician AMN Paul Radke from San Diego, Californ...

The original finding aid described this photograph as: [Complete] Scene Caption: Aviation Electronic Technician AMN Paul Radke from San Diego, California, loads relief supplies onto an CH-53E helicopter from ... More

A 31st Supply Squadron member checks warehouse inventory operating a Hyster 30. The members of the 31st SUPS at Aviano Air Base, Italy, are finalists for the 2000 USAFE Daedalian Award. (sub-standard) (Duplicate image, see also DF-SD-01-07006 or search 001024-F-7253S-001)

A 31st Supply Squadron member checks warehouse inventory operating a H...

The original finding aid described this photograph as: Base: Aviano Air Base State: Pordenone Country: Italy (ITA) Scene Camera Operator: SRA Elizabeth M. Slade, USAF Release Status: Released to Public Com... More

A member of the 31st Supply Squadron (SUPS), Aviano Air Base, Italy, checks warehouse inventory with a Hyster 30. The 31st SUPS are finalists for the 2000 USAFE Major General R. Warren Carter Daedalian and Supply Effectiveness Award. (Duplicate image, see also DF-SD-01-06276 or search 001024-F-7253S-001)

A member of the 31st Supply Squadron (SUPS), Aviano Air Base, Italy, c...

The original finding aid described this photograph as: Base: Aviano Air Base State: Pordenone Country: Italy (ITA) Scene Camera Operator: SRA Elizabeth M Slade, USAF Release Status: Released to Public Comb... More

SENIOR AIRMAN Daniel Kirkes, USAF, 55th Maintenance Squadron, directs the driver in the Hyster forklift to stop on the weighing station platform, so the pallet can be weighted at the Mobility Personnel Center, during the Operations Readiness Exercise at Offutt Air Force Base. The base is training in preparation for an upcoming Operational Readiness Inspection (ORI)

SENIOR AIRMAN Daniel Kirkes, USAF, 55th Maintenance Squadron, directs ...

The original finding aid described this photograph as: Base: Offutt Air Force Base State: Nebraska (NE) Country: United States Of America (USA) Scene Major Command Shown: ACC Scene Camera Operator: SRA Wal... More

AIRMAN First Class Courtney Brovey, Customer Service Supply Technician, with the 48th Supply Squadron, Royal Air Force Base Lakenheath, United Kingdom, competes in the Supply Forklift Slalom, driving a Hyster Light Duty Forklift truck during Supply Rodeo 2001

AIRMAN First Class Courtney Brovey, Customer Service Supply Technician...

The original finding aid described this photograph as: Base: Ramstein Air Base State: Rheinland-Pfalz Country: Deutschland / Germany (DEU) Scene Major Command Shown: USAFE Scene Camera Operator: AIRMAN 1ST... More

SENIOR AIRMAN Joshua Hodgin, Mission Readiness Spares Package Technician, with the 31st Supply Squadron, Aviano Air Base, Italy, competes in the Supply Forklift Slalom, driving a Hyster Light Duty Forklift truck during Supply Rodeo 2001 held at Ramstein Air Base, Germany

SENIOR AIRMAN Joshua Hodgin, Mission Readiness Spares Package Technici...

The original finding aid described this photograph as: Base: Ramstein Air Base State: Rheinland-Pfalz Country: Deutschland / Germany (DEU) Scene Major Command Shown: USAFE Scene Camera Operator: AIRMAN 1ST... More

SENIOR AIRMAN Kelle Vos, a Mission Readiness Spares Package Technician, with the 100th Supply Squadron, Royal Air Force Base Mildenhall, United Kingdom, competes in the Supply Forklift Slalom, driving a Hyster Light Duty Forklift truck during the 2001 Supply Rodeo held at Ramstein Air Base, Germany

SENIOR AIRMAN Kelle Vos, a Mission Readiness Spares Package Technician...

The original finding aid described this photograph as: Base: Ramstein Air Base State: Rheinland-Pfalz Country: Deutschland / Germany (DEU) Scene Major Command Shown: USAFE Scene Camera Operator: AIRMAN 1ST... More

Members of the 86th Transportation Group use a Hyster forklift to put up barriers around the 86th Airlift Wing Headquarters Building in response to Condition Threatcon Delta on Ramstein Air Base, Germany. The base is now operating in a heighten state of alertness in response to terrorist attacks on the World Trade Centers Twin Towers in New York and at the Pentagon, when hijackers deliberately flew civilian airliners into the buildings, on the morning of 11 September 2001

Members of the 86th Transportation Group use a Hyster forklift to put ...

The original finding aid described this photograph as: Base: Ramstein Air Base State: Rheinland-Pfalz Country: Deutschland / Germany (DEU) Scene Major Command Shown: USAFE Scene Camera Operator: A1C Tia De... More

Members of the 86th Transportation Group use a Hyster forklift to put up barriers around the 86th Airlift Wing Headquarters Building in response to Condition Threatcon Delta on Ramstein Air Base, Germany. The base is now operating in a heighten state of alertness in response to terrorist attacks on the World Trade Centers Twin Towers in New York and at the Pentagon, when hijackers deliberately flew civilian airliners into the buildings, on the morning of 11 September 2001

Members of the 86th Transportation Group use a Hyster forklift to put ...

The original finding aid described this photograph as: Base: Ramstein Air Base State: Rheinland-Pfalz Country: Deutschland / Germany (DEU) Scene Major Command Shown: USAFE Scene Camera Operator: A1C Tia De... More

Members of the 86th Transportation Group use a Hyster forklift to put up barriers around the 86th Airlift Wing Headquarters Building in response to Condition Threatcon Delta on Ramstein Air Base, Germany. The base is now operating in a heighten state of alertness in response to terrorist attacks on the World Trade Centers Twin Towers in New York and at the Pentagon, when hijackers deliberately flew civilian airliners into the buildings, on the morning of 11 September 2001

Members of the 86th Transportation Group use a Hyster forklift to put ...

The original finding aid described this photograph as: Base: Ramstein Air Base State: Rheinland-Pfalz Country: Deutschland / Germany (DEU) Scene Major Command Shown: USAFE Scene Camera Operator: A1C Tia De... More

AIRMAN First Class (A1C) Philip Hayes, 55th Maintenance Squadron, transports a cargo pallet using a Hyster forklift during the Operational Readiness Exercise (ORE) at Offutt AFB, NE

AIRMAN First Class (A1C) Philip Hayes, 55th Maintenance Squadron, tran...

The original finding aid described this photograph as: Base: Offutt Air Force Base State: Nebraska (NE) Country: United States Of America (USA) Scene Camera Operator: A1C Jacob N. Bailey, USAF Release Stat... More

CHIEF MASTER Sergeant (CMSGT) Peter Tautznik, USAF, 109th Airlift Wing (AW), Logistics Squadron, uses a Hyster H155xl 15K forklift to transport a 463L pallet loaded with 109th AW security personnel baggage to a waiting aircraft. The 109th AW Security Force Squadron (SFS) personnel activated in support of Operation NOBEL EAGLE

CHIEF MASTER Sergeant (CMSGT) Peter Tautznik, USAF, 109th Airlift Wing...

The original finding aid described this photograph as: Subject Operation/Series: NOBLE EAGLE Base: Stratton Ang Base State: New York (NY) Country: United States Of America (USA) Scene Major Command Shown: ... More

Members of Davis-Monthan AFB, Arizona, using Hyster 10K forklift prepare support cargo for deployment in support of Operation ENDURING FREEDOM. In response to the terrorist attacks on September 11, 2001 at the New York World Trade Center and the Pentagon, President George W. Bush initiated Operation ENDURING FREEDOM in support of the Global War on Terrorism (GWOT), fighting terrorism abroad

Members of Davis-Monthan AFB, Arizona, using Hyster 10K forklift prepa...

The original finding aid described this photograph as: Subject Operation/Series: ENDURING FREEDOM Base: Davis-Monthan Air Force Base State: Arizona (AZ) Country: United States Of America (USA) Scene Major ... More

An MC-130P Combat Shadow aircraft crew from the 347th Rescue Wing (RW), 71st Rescue Squadron (RS) from Moody Air Force Base, Georgia, deployed to Southwest Asia, downloads its cargo of four-wheeled "Dune Buggy" All Terrain Cycle (ATC) using a Hyster materials handling forklift

An MC-130P Combat Shadow aircraft crew from the 347th Rescue Wing (RW)...

The original finding aid described this photograph as: Subject Operation/Series: SOUTHERN WATCH 2001 Country: Southwest Asia Scene Major Command Shown: CENTCOM Scene Camera Operator: MSGT Dave Nolan, USAF ... More

Technical Sergeant Lance Aldridge, USAF, marshals SENIOR AIRMAN David Famiglietti, USAF, as he uses a Hyster forklift to place barricades in front of the parking lot of Ramstein Southside Billeting, on September 12, 2001. Due to the terrorist attacks on the World Trade Centers Twin Towers in New York and at the Pentagon, increased force protection measures, such a vehicle searches and barricades are stepped up at military installations around the world

Technical Sergeant Lance Aldridge, USAF, marshals SENIOR AIRMAN David ...

The original finding aid described this photograph as: Base: Ramstein Air Base State: Rheinland-Pfalz Country: Deutschland / Germany (DEU) Scene Major Command Shown: USAFE Scene Camera Operator: SSGT Pamel... More

At night personnel assigned to the 169th Traffic Management Office (TMO) of the South Carolina Air National Guard (SCANG) use a Hyster H155xl forklift to move a loaded 463L pallet into position for loading onto a C-5 Galaxy on the flightline at McEntire ANG Station, South Carolina. The C-5 will transport members of the SCANG to an undisclosed location in support of Operation ENDURING FREEDOM. The SCANG personnel are the first Air National Guard personnel from South Carolina to deploy to forward locations in support of the war

At night personnel assigned to the 169th Traffic Management Office (TM...

The original finding aid described this photograph as: Subject Operation/Series: ENDURING FREEDOM Base: Mcentire Ang Station State: South Carolina (SC) Country: United States Of America (USA) Scene Camera ... More

At night personnel assigned to the 169th Traffic Management Office (TMO) of the South Carolina Air National Guard (SCANG) use a Hyster H155xl forklift to move a loaded 463L pallet into position for loading onto a C-5 Galaxy on the flightline at McEntire ANG Station, South Carolina. The C-5 will transport members of the SCANG to an undisclosed location in support of Operation ENDURING FREEDOM. The SCANG personnel are the first Air National Guard personnel from South Carolina to deploy to forward locations in support of the war

At night personnel assigned to the 169th Traffic Management Office (TM...

The original finding aid described this photograph as: Subject Operation/Series: ENDURING FREEDOM Base: Mcentire Ang Station State: South Carolina (SC) Country: United States Of America (USA) Scene Camera ... More

Technical Sergeant (TSGT) Greg Qualls, (left front), USAF, and MASTER Sergeant (MSGT) Rick Sehorn, (right), USAF, direct the Hyster H155xl 15k forklift operator STAFF Sergeant (SSGT) Daniel Smith, USAF, as they place an upgraded stainless steel tank onto the water transportation truck. All are with the 188th Fighter Wing (FW), Arkansas Air National Guard (ARANG), at Fort Smith

Technical Sergeant (TSGT) Greg Qualls, (left front), USAF, and MASTER ...

The original finding aid described this photograph as: Base: Fort Smith State: Arkansas (AR) Country: United States Of America (USA) Scene Major Command Shown: ACC Scene Camera Operator: SMSGT Dennis L. Br... More

A pair of Hyster H155xl 15K forklifts move into place Internal Airlift or Helicopter Slingable Container Units-90 (ISU-90) as the 188th Fighter Wing (FW), Arkansas Air National Guard (ARANG), Fort Smith, Cargo Deployment Function (CDF) load crew begin lining up for preparation to load an aircraft for deployment to an undisclosed location

A pair of Hyster H155xl 15K forklifts move into place Internal Airlift...

The original finding aid described this photograph as: Subject Operation/Series: NOBLE EAGLE Base: Fort Smith State: Arkansas (AR) Country: United States Of America (USA) Scene Major Command Shown: ACC Sc... More

A Hyster Materials Handling forklift sits nearby as a US Army (USA) CH-47 Chinook helicopter from Detachment 1, Company G, 140th Aviation, Nevada Army National Guard (ANG), takes off from Bird International Airport, during the Tradewinds 2002 Field Training Exercise (FTX), on the island of Antiqua

A Hyster Materials Handling forklift sits nearby as a US Army (USA) CH...

The original finding aid described this photograph as: Base: Bird International Airport Country: Antigua And Barbuda (ATG) Scene Major Command Shown: USSOUTHCOM Scene Camera Operator: Joseph Bonet, CIV Rel... More

With the Hyster H155xl 15k forklift, US Air Force (USAF) Technical Sergeant (TSGT) Michael Farmer (driver), USAF SENIOR AIRMAN (SRA) David Walls (center), and USAF STAFF Sergeant (SSGT) Robin Threlkel, 100th Logistics Readiness Squadron, marshal cargo pallets prior to loading onto an aircraft as part of the RAF Mildenhall Phase I exercise

With the Hyster H155xl 15k forklift, US Air Force (USAF) Technical Ser...

The original finding aid described this photograph as: Subject Operation/Series: RAF MILDENHALL PHASE I Base: RAF Mildenhall Country: Great Britain / England (GBR) Scene Major Command Shown: USAFE Scene Ca... More

US Air Force (USAF) SENIOR AIRMAN (SRA) Paul Franklin, 723rd Air Mobility Squadron (AMS), Ramstein Air Base (AB), Germany, acts as a spotter for USAF STAFF Sergeant (SSGT) Matthew Huffman as he picks up a pallet with a Hyster H155xl 15K forklift. In the background, on the ramp sits a USAF C-141 Starlifter. (Duplicate image, see also DFSD0412471 or search 021211F1851U003)

US Air Force (USAF) SENIOR AIRMAN (SRA) Paul Franklin, 723rd Air Mobil...

The original finding aid described this photograph as: Base: Ramstein Air Base State: Rheinland-Pfalz Country: Deutschland / Germany (DEU) Scene Camera Operator: TSGT David D Underwood, Jr, USAF Release St... More

US Air Force (USAF) SENIOR AIRMAN (SRA) Paul Franklin, 723rd Air Mobility Squadron (AMS), Ramstein Air Base (AB), Germany, acts as a spotter for USAF STAFF Sergeant (SSGT) Matthew Huffman as he picks up a pallet with a Hyster H155xl 15K forklift. In the background, on the ramp sits a USAF C-141 Starlifter. (Duplicate image, see also DFSD0413532 or search 021211F1851U003)

US Air Force (USAF) SENIOR AIRMAN (SRA) Paul Franklin, 723rd Air Mobil...

The original finding aid described this photograph as: Base: Ramstein Air Base State: Rheinland-Pfalz Country: Deutschland / Germany (DEU) Scene Camera Operator: TSGT David D Underwood, Jr, USAF Release St... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, an orbiter main engine is secured on the new engine hyster, built by Rocketdyne, used to remove it from the orbiter. . KSC-02pd1966

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, an or...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, an orbiter main engine is secured on the new engine hyster, built by Rocketdyne, used to remove it from the orbiter. .

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, workers use a new engine hyster, built by Rocketdyne, to remove an engine on an orbiter. . KSC-02pd1964

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, work...

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, workers use a new engine hyster, built by Rocketdyne, to remove an engine on an orbiter. .

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, workers use a new engine hyster, built by Rocketdyne, to remove an engine on an orbiter. . KSC-02pd1965

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, work...

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, workers use a new engine hyster, built by Rocketdyne, to remove an engine on an orbiter. .

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, an orbiter main engine is lifted by a new engine hyster, built by Rocketdyne, that is used to remove it from the orbiter. . KSC-02pd1967

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, an o...

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, an orbiter main engine is lifted by a new engine hyster, built by Rocketdyne, that is used to remove it from the orbiter. .

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers use a new engine hyster, built by Rocketdyne, to remove an engine on an orbiter. . KSC-02pd1963

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, worke...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers use a new engine hyster, built by Rocketdyne, to remove an engine on an orbiter. .

US Air Force (USAF) members from the Munitions Flight use a Hyster H155xl 15k forklift to move unused bombs into storage in preparation for redeployment during Operation IRAQI FREEDOM

US Air Force (USAF) members from the Munitions Flight use a Hyster H15...

The original finding aid described this photograph as: Country: Unknown Scene Major Command Shown: CENTAF Scene Camera Operator: A1C Stacia M. Willis, USAF Release Status: Released to Public Combined Milita... More

US Air Force (USAF) AIRMAN First Class (A1C) Miguel Frett, 379th Expeditionary Maintenance Squadron (EMXS) Ammo, drives a Hyster 60 4K forklift to pick up shipping cases for munitions at a forward deployed location during Operation IRAQI FREEDOM

US Air Force (USAF) AIRMAN First Class (A1C) Miguel Frett, 379th Exped...

The original finding aid described this photograph as: Country: Unknown Scene Camera Operator: SSGT David Donovan, USAF Release Status: Released to Public Combined Military Service Digital Photographic Files

US Air Force (USAF) personnel from the 103rd Fighter Wing (FW), Connecticut Air National Guard (CTANG), use a Hyster H155XL forklift to move pallets into a temporary hanger at the Cargo Processing Point (CPP) during the Operation Readiness Exercise (ORE) at the 103rd FW, Bradley ANG Base, East Granby, CT

US Air Force (USAF) personnel from the 103rd Fighter Wing (FW), Connec...

The original finding aid described this photograph as: Base: Bradley Air National Guard Base State: Connecticut (CT) Country: United States Of America (USA) Scene Major Command Shown: ANG Scene Camera Oper... More

A Hyster forklift grabs a pallet of bottled water from its staging area at Muniz Air National Guard Base, San Juan, Puerto Rico, on March 5, 2004, to be loaded onto an aircraft bound for Haiti. (U.S. Army photo by Kaye Richey) (Released)

A Hyster forklift grabs a pallet of bottled water from its staging are...

The original finding aid described this photograph as: Base: San Juan State: Puerto Rico (PR) Country: United States Of America (USA) Scene Camera Operator: Kaye Richey, CIV Release Status: Released to Pub... More

Members of the 131st Fighter Wing (FW), Missouri Air National Guard (MOANG), use a Hyster H155xl 15K forklift to load equipment and supplies onboard a Mississippi Air National Guard (MSANG) C-17A Globemaster III prior to deployment to ORI (Operational Readiness Inspection) site in Gulfport, MS

Members of the 131st Fighter Wing (FW), Missouri Air National Guard (M...

The original finding aid described this photograph as: Base: Lambert Iap, Saint Louis State: Missouri (MO) Country: United States Of America (USA) Scene Camera Operator: Msgt Richard C. Fonner, USAF Releas... More

US Air Force (USAF) Airmen from 437th Airlift Squadron (AS), Charleston Air Force Base (AFB), South Carolina (SC), deployed to Dobbins Air Reserve Base (ARB), Georgia (GA), use a Hyster H155xl 15K forklift to move relief supplies from a trailer. They are supporting relief operations conducted by Federal Emergency Management Agency (FEMA) in response to Hurricane Charley victims of Florida (FL)

US Air Force (USAF) Airmen from 437th Airlift Squadron (AS), Charlesto...

The original finding aid described this photograph as: Base: Dobbins Air Reserve Base State: Georgia (GA) Country: United States Of America (USA) Scene Camera Operator: SSGT Aaron D. Allmon II, USAF Releas... More

US Air Force (USAF) SENIOR AIRMAN (SRA) Robert Hutchinson, 80th Aerial Port Squadron (APS), Dobbins Air Reserve Base (ARB), Georgia (GA), uses a Hyster H155xl 15K forklift to move a cargo relief pallet. He and his unit are supporting relief operations conducted by Federal Emergency Management Agency (FEMA) in response to Hurricane Charley victims in Florida (FL)

US Air Force (USAF) SENIOR AIRMAN (SRA) Robert Hutchinson, 80th Aerial...

The original finding aid described this photograph as: Base: Dobbins Air Reserve Base State: Georgia (GA) Country: United States Of America (USA) Scene Camera Operator: SSGT Aaron D. Allmon II, USAF Releas... More

040821-F-3711S-065 (Aug. 21, 2004)US Air Force (USAF) MASTER Sergeant (MSGT) Bjorn Gronbecker, 119th Flight Wing (FW), North Dakota Air National Guard (NDANG), Fargo, North Dakota (ND), operates a Hyster forklift in reverse carrying a munitions pallet as USAF MSGT Lee Gunderson (left) and USAF Technical Sergeant (TSGT) Matt Rippy (right) act as escorts to the staging area during an Operational Readiness Inspection (ORI), North Dakota Air National Guard (NDANG) Base, Fargo, North Dakota (ND).U.S. Air Force official photo by TECH SGT. Bradly Schneider (RELEASED)

040821-F-3711S-065 (Aug. 21, 2004)US Air Force (USAF) MASTER Sergeant ...

The original finding aid described this photograph as: Base: Fargo State: North Dakota (ND) Country: United States Of America (USA) Scene Camera Operator: TSGT Bradly Schneider, USAF Release Status: Releas... More

U.S. Air Force AIRMAN Ryan Dufour (left) spots AIRMAN 1ST Class Timothy Click while he operates a Hyster H155XL forklift at the cargo deployment area during Phase I of an Operational Readiness Inspection at Holloman Air Force Base, N.M., on Nov. 2, 2004. (USAF PHOTO by AIRMAN 1ST Class Jessica Thornton) (Released)

U.S. Air Force AIRMAN Ryan Dufour (left) spots AIRMAN 1ST Class Timoth...

The original finding aid described this photograph as: Base: Holloman Air Force Base State: New Mexico (NM) Country: United States Of America (USA) Scene Camera Operator: A1C Jessica Thornton, USAF Release... More

U.S. Air Force SENIOR AIRMAN Gerald Rush operates a Hyster H155XL forklift to transport cargo into a hangar as the 9th Fighter Squadron prepares to move to a simulated deployed location in support of an Operational Readiness Inspection at Holloman Air Force Base, N.M., on Nov. 2, 2004. (USAF PHOTO by TECH. SGT. James R. Hart Jr.) (Released)

U.S. Air Force SENIOR AIRMAN Gerald Rush operates a Hyster H155XL fork...

The original finding aid described this photograph as: Base: Holloman Air Force Base State: New Mexico (NM) Country: United States Of America (USA) Scene Camera Operator: TSGT James R. Hart Jr., USAF Relea... More

New York Air National Guard personnel uses a Hyster H155XL 15K forklift to simulate loading cargo on an aircraft during an Operational Readiness Exercise at the 174th Fighter Wing, Hancock Field Air National Guard Base, Syracuse-Hancock International Airport, N.Y., on Nov. 6, 2004. (USAF PHOTO by SENIOR AIRMAN Ricky Best) (Released)

New York Air National Guard personnel uses a Hyster H155XL 15K forklif...

The original finding aid described this photograph as: Base: 174th Fighter Wing State: New York (NY) Country: United States Of America (USA) Scene Camera Operator: SRA Ricky Best, USAF Release Status: Rel... More

U.S. Air Force personnel from the 374th Airlift Wing, Yokota Air Base (AB), Japan, use a Hyster H155XL 15K forklift to load cargo pallets on a trailer bed at the flightline during an Operational Readiness Exercise at Yokota AB, on Nov. 9, 2004. (USAF PHOTO by MASTER SGT. Val Gempis) (Released)

U.S. Air Force personnel from the 374th Airlift Wing, Yokota Air Base ...

The original finding aid described this photograph as: Base: Yokota Air Base Country: Japan (JPN) Scene Camera Operator: MSGT Val Gempis, USAF Release Status: Released to Public Combined Military Service Di... More

U.S. Air Force personnel from the 374th Airlift Wing, Yokota Air Base (AB), Japan, use a Hyster H155XL 15K forklift to move a cargo pallet at the flightline during an Operational Readiness Exercise at Yokota AB, on Nov. 9, 2004. (USAF PHOTO by MASTER SGT. Val Gempis) (Released)

U.S. Air Force personnel from the 374th Airlift Wing, Yokota Air Base ...

The original finding aid described this photograph as: Base: Yokota Air Base Country: Japan (JPN) Scene Camera Operator: MSGT Val Gempis, USAF Release Status: Released to Public Combined Military Service Di... More

KENNEDY SPACE CENTER, FLA. - A Hyster forklift in the Orbiter Processing Facility moves the body flap toward the aft of the orbiter Discovery. The body flap is an aluminum structure consisting of ribs, spars, skin panels and a trailing edge assembly. It thermally shields the three main engines during entry and provides pitch control trim during landing approach. Discovery is being processed for launch on the first Return to Flight mission, STS-114. KSC-04pd0455

KENNEDY SPACE CENTER, FLA. - A Hyster forklift in the Orbiter Process...

KENNEDY SPACE CENTER, FLA. - A Hyster forklift in the Orbiter Processing Facility moves the body flap toward the aft of the orbiter Discovery. The body flap is an aluminum structure consisting of ribs, spars, ... More

KENNEDY SPACE CENTER, FLA. - A Hyster forklift in the Orbiter Processing Facility lifts the body flap to be installed on the orbiter Discovery. The body flap is an aluminum structure consisting of ribs, spars, skin panels and a trailing edge assembly. It thermally shields the three main engines during entry and provides pitch control trim during landing approach. Discovery is being processed for launch on the first Return to Flight mission, STS-114. KSC-04pd0454

KENNEDY SPACE CENTER, FLA. - A Hyster forklift in the Orbiter Process...

KENNEDY SPACE CENTER, FLA. - A Hyster forklift in the Orbiter Processing Facility lifts the body flap to be installed on the orbiter Discovery. The body flap is an aluminum structure consisting of ribs, spars,... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, A Hyster forklift supports the body flap as workers secure it to the orbiter Discovery. The body flap is an aluminum structure consisting of ribs, spars, skin panels and a trailing edge assembly. It thermally shields the three main engines during entry and provides pitch control trim during landing approach. Discovery is being processed for launch on the first Return to Flight mission, STS-114. KSC-04pd0460

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, A Hy...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, A Hyster forklift supports the body flap as workers secure it to the orbiter Discovery. The body flap is an aluminum structure consisting of rib... More

KENNEDY SPACE CENTER, FLA. - In In the Orbiter Processing Facility bay 1, a Hyster forklift maneuvers a main engine into position for installation into Discovery. The main engine configuration is manufactured by Boeing Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet (4.3 meters) long, weighs about 6,700 pounds (3,039 kilograms), and is 7.5 feet (2.3 meters) in diameter at the end of the nozzle. Discovery is being processed for the second return-to-flight mission STS-121. KSC-06pd0018

KENNEDY SPACE CENTER, FLA. - In In the Orbiter Processing Facility ba...

KENNEDY SPACE CENTER, FLA. - In In the Orbiter Processing Facility bay 1, a Hyster forklift maneuvers a main engine into position for installation into Discovery. The main engine configuration is manufactured... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 1, a Hyster forklift moves a main engine into position for installation into Discovery. The main engine configuration is manufactured by Boeing Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet (4.3 meters) long, weighs about 6,700 pounds (3,039 kilograms), and is 7.5 feet (2.3 meters) in diameter at the end of the nozzle. Discovery is being processed for the second return-to-flight mission STS-121. KSC-06pd0017

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 1...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 1, a Hyster forklift moves a main engine into position for installation into Discovery. The main engine configuration is manufactured by Boei... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 1, a Hyster forklift moves a main engine toward the aft of Discovery as technicians stand by for insertion and installation. The main engine configuration is manufactured by Boeing Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet (4.3 meters) long, weighs about 6,700 pounds (3,039 kilograms), and is 7.5 feet (2.3 meters) in diameter at the end of the nozzle. Discovery is being processed for the second return-to-flight mission STS-121. KSC-06pd0016

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 1...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 1, a Hyster forklift moves a main engine toward the aft of Discovery as technicians stand by for insertion and installation. The main engine... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 1, technicians on the Hyster forklift move a main engine into place on Discovery. The main engine configuration is manufactured by Boeing Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet (4.3 meters) long, weighs about 6,700 pounds (3,039 kilograms), and is 7.5 feet (2.3 meters) in diameter at the end of the nozzle. Discovery is being processed for the second return-to-flight mission STS-121. KSC-06pd0019

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 1...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 1, technicians on the Hyster forklift move a main engine into place on Discovery. The main engine configuration is manufactured by Boeing Roc... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured by Pratt & Whitney Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-116 (12A.1), to deliver a third truss segment, a SPACEHAB module and other key components to the International Space Station. The launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Kim Shiflett KSC-06pd2170

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay ...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured by ... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift are ready to install main engine No. 3 on Discovery. The main engine configuration is manufactured by Pratt & Whitney Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-116 (12A.1), to deliver a third truss segment, a SPACEHAB module and other key components to the International Space Station. The launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Kim Shiflett KSC-06pd2166

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift are ready to install main engine No. 3 on Discovery. The main engine configuration is manufactured b... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured by Pratt & Whitney Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-116 (12A.1), to deliver a third truss segment, a SPACEHAB module and other key components to the International Space Station. The launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Kim Shiflett KSC-06pd2168

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured by P... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured by Pratt & Whitney Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-116 (12A.1), to deliver a third truss segment, a SPACEHAB module and other key components to the International Space Station. The launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Kim Shiflett KSC-06pd2167

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility ba...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured b... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured by Pratt & Whitney Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-116 (12A.1), to deliver a third truss segment, a SPACEHAB module and other key components to the International Space Station. The launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Kim Shiflett KSC-06pd2171

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay ...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured by P... More

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured by Pratt & Whitney Rocketdyne in Canoga Park, Calif., and includes a Pratt & Whitney high-pressure fuel turbo pump. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-116 (12A.1), to deliver a third truss segment, a SPACEHAB module and other key components to the International Space Station. The launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Kim Shiflett KSC-06pd2169

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay ...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility bay 3, technicians on the Hyster forklift maneuver main engine No. 3 into place in Discovery. The main engine configuration is manufactured by ... More

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, technicians on a Hyster forklift maneuver space shuttle main engine no. 3 into place on Endeavour. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is scheduled for mission STS-118, targeted for launch on June 28. The mission will be the 22nd flight to the International Space Station, carrying another starboard array, S5, for installation. Photo credit: NASA/George Shelton KSC-07pd0134

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, ...

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, technicians on a Hyster forklift maneuver space shuttle main engine no. 3 into place on Endeavour. Each space shuttle main engine is 14 fee... More

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, technicians on a Hyster forklift install space shuttle main engine no. 3 into Endeavour. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is scheduled for mission STS-118, targeted for launch on June 28. The mission will be the 22nd flight to the International Space Station, carrying another starboard array, S5, for installation. Photo credit: NASA/George Shelton KSC-07pd0133

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, t...

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, technicians on a Hyster forklift install space shuttle main engine no. 3 into Endeavour. Each space shuttle main engine is 14 feet long, we... More

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, technicians on a Hyster forklift maneuver space shuttle main engine no. 3 into place on Endeavour. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is scheduled for mission STS-118, targeted for launch on June 28. The mission will be the 22nd flight to the International Space Station, carrying another starboard array, S5, for installation. Photo credit: NASA/George Shelton KSC-07pd0135

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, ...

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, technicians on a Hyster forklift maneuver space shuttle main engine no. 3 into place on Endeavour. Each space shuttle main engine is 14 feet... More

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift maneuver space shuttle main engine no. 1 into place on Endeavour. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is targeted for launch on Feb. 14 for mission STS-123 to the International Space Station. Photo credit: NASA/Jack Pfaller KSC-07pd3303

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at...

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift maneuver space shuttle main engine no. 1 into place on Endeavour. Each space... More

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift move space shuttle main engine no. 1 toward Endeavour for installation. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is targeted for launch on Feb. 14 for mission STS-123 to the International Space Station. Photo credit: NASA/Jack Pfaller KSC-07pd3301

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at...

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift move space shuttle main engine no. 1 toward Endeavour for installation. Each... More

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift maneuver space shuttle main engine no. 1 into place on Endeavour. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is targeted for launch on Feb. 14 for mission STS-123 to the International Space Station. Photo credit: NASA/Jack Pfaller KSC-07pd3306

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at...

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift maneuver space shuttle main engine no. 1 into place on Endeavour. Each space... More

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift maneuver space shuttle main engine no. 1 into place on Endeavour. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is targeted for launch on Feb. 14 for mission STS-123 to the International Space Station. Photo credit: NASA/Jack Pfaller KSC-07pd3305

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at...

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift maneuver space shuttle main engine no. 1 into place on Endeavour. Each space ... More

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift maneuver space shuttle main engine no. 1 into place on Endeavour. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is targeted for launch on Feb. 14 for mission STS-123 to the International Space Station. Photo credit: NASA/Jack Pfaller KSC-07pd3304

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at...

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift maneuver space shuttle main engine no. 1 into place on Endeavour. Each space ... More

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift move space shuttle main engine no. 1 toward Endeavour for installation. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is targeted for launch on Feb. 14 for mission STS-123 to the International Space Station. Photo credit: NASA/Jack Pfaller KSC-07pd3302

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at...

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift move space shuttle main engine no. 1 toward Endeavour for installation. Each... More

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility bay 2, technicians on the Hyster forklift maneuver main engine 1 for installation on space shuttle Endeavour. The scheduled launch vehicle for the STS-126 mission, Endeavour will deliver a multi-purpose logistics module to the International Space Station. Launch is targeted for Nov. 10. Endeavour is also the backup shuttle, if needed for rescue, for the STS-125 mission in October that will make repairs on the Hubble Space Telescope. For that purpose, it is designated STS-400. Photo credit: NASA/Jim Grossmann KSC-08pd1847

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility bay 2, tec...

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility bay 2, technicians on the Hyster forklift maneuver main engine 1 for installation on space shuttle Endeavour. The scheduled launch vehicle for the ST... More

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida, a Hyster forklift (upper left) is used to raise space shuttle main engine No. 1 for installation in space shuttle Discovery. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-119, targeted for launch on Feb. 12, 2009. Discovery and its crew will deliver integrated truss structure 6 (S6) and solar arrays to the International Space Station. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd2944

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility bay 3 at NASA's ...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida, a Hyster forklift (upper left) is used to raise space shuttle main engine No. 1 for installation in space s... More

CAPE CANAVERAL, Fla. - Using a Hyster forklift, workers maneuver space shuttle main engine No. 1 (top) into place in space shuttle Discovery in Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-119, targeted for launch on Feb. 12, 2009. Discovery and its crew will deliver integrated truss structure 6 (S6) and solar arrays to the International Space Station. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd2942

CAPE CANAVERAL, Fla. - Using a Hyster forklift, workers maneuver space...

CAPE CANAVERAL, Fla. - Using a Hyster forklift, workers maneuver space shuttle main engine No. 1 (top) into place in space shuttle Discovery in Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center i... More

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida, a Hyster forklift (near top) moves space shuttle main engine No. 1 closer to space shuttle Discovery for installation. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-119, targeted for launch on Feb. 12, 2009. Discovery and its crew will deliver integrated truss structure 6 (S6) and solar arrays to the International Space Station. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd2946

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility bay 3 at NASA's ...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida, a Hyster forklift (near top) moves space shuttle main engine No. 1 closer to space shuttle Discovery for in... More

CAPE CANAVERAL, Fla. - Using a Hyster forklift, workers install space shuttle main engine No. 1 (top) in space shuttle Discovery in Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-119, targeted for launch on Feb. 12, 2009. Discovery and its crew will deliver integrated truss structure 6 (S6) and solar arrays to the International Space Station. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd2941

CAPE CANAVERAL, Fla. - Using a Hyster forklift, workers install space ...

CAPE CANAVERAL, Fla. - Using a Hyster forklift, workers install space shuttle main engine No. 1 (top) in space shuttle Discovery in Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida. ... More

CAPE CANAVERAL, FIa. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida, a Hyster forklift (near top) moves space shuttle main engine No. 1 closer to space shuttle Discovery for installation. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-119, targeted for launch on Feb. 12, 2009. Discovery and its crew will deliver integrated truss structure 6 (S6) and solar arrays to the International Space Station. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd2945

CAPE CANAVERAL, FIa. -- In Orbiter Processing Facility bay 3 at NASA's...

CAPE CANAVERAL, FIa. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida, a Hyster forklift (near top) moves space shuttle main engine No. 1 closer to space shuttle Discovery for i... More

CAPE CANAVERAL, Fla. - Using the Hyster forklift, workers move space shuttle main engine No. 3 during installation in space shuttle Discovery in Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-119, targeted for launch on Feb. 12, 2009. Discovery and its crew will deliver integrated truss structure 6 (S6) and solar arrays to the International Space Station. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd2933

CAPE CANAVERAL, Fla. - Using the Hyster forklift, workers move space s...

CAPE CANAVERAL, Fla. - Using the Hyster forklift, workers move space shuttle main engine No. 3 during installation in space shuttle Discovery in Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center ... More

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the Hyster forklift is ready to move away from space shuttle Discovery after removing one of the three main engines. Engine removal is part of the post-landing processing. Discovery completed the STS-119 mission March 28 with a landing at Kennedy's Shuttle Landing Facility. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery next will be used on the STS-128 mission to deliver supplies and equipment to the International Space Station. The launch is targeted for Aug. 6. Photo credit: NASA/Tim Jacobs KSC-2009-2609

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the ...

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the Hyster forklift is ready to move away from space shuttle Discovery after removing one of the three main engines. Engine removal is part of t... More

CAPE CANAVERAL, Fla. – After removal from space shuttle Discovery, the third and final main engine, carried by the Hyster forklift, has left Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery next will be used on the STS-128 mission to deliver supplies and equipment to the International Space Station. The launch is targeted for Aug. 6. Photo credit: NASA/Tim Jacobs KSC-2009-2613

CAPE CANAVERAL, Fla. – After removal from space shuttle Discovery, the...

CAPE CANAVERAL, Fla. – After removal from space shuttle Discovery, the third and final main engine, carried by the Hyster forklift, has left Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Flori... More

CAPE CANAVERAL, Fla. – After removal from space shuttle Discovery, the third and final main engine has left Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida. Behind the Hyster forklift holding the engine is the Vehicle Assembly Building. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery next will be used on the STS-128 mission to deliver supplies and equipment to the International Space Station. The launch is targeted for Aug. 6. Photo credit: NASA/Tim Jacobs KSC-2009-2612

CAPE CANAVERAL, Fla. – After removal from space shuttle Discovery, the...

CAPE CANAVERAL, Fla. – After removal from space shuttle Discovery, the third and final main engine has left Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida. Behind the Hyster forklift h... More

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, technicians use a Hyster forklift to close in on one of the three main engines on space shuttle Discovery to remove it. Engine removal is part of the post-landing processing. Discovery completed the STS-119 mission March 28 with a landing at Kennedy's Shuttle Landing Facility. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery next will be used on the STS-128 mission to deliver supplies and equipment to the International Space Station. The launch is targeted for Aug. 6. Photo credit: NASA/Tim Jacobs KSC-2009-2605

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, tech...

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, technicians use a Hyster forklift to close in on one of the three main engines on space shuttle Discovery to remove it. Engine removal is part ... More

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift prepare to remove one of the three main engines on space shuttle Discovery. Engine removal is part of the post-landing processing. Discovery completed the STS-119 mission March 28 with a landing at Kennedy's Shuttle Landing Facility. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery next will be used on the STS-128 mission to deliver supplies and equipment to the International Space Station. The launch is targeted for Aug. 6. Photo credit: NASA/Tim Jacobs KSC-2009-2607

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, tech...

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift prepare to remove one of the three main engines on space shuttle Discovery. Engine removal is part of the p... More

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift "stab" one of the three main engines on space shuttle Discovery to remove it. Engine removal is part of the post-landing processing. Discovery completed the STS-119 mission March 28 with a landing at Kennedy's Shuttle Landing Facility. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery next will be used on the STS-128 mission to deliver supplies and equipment to the International Space Station. The launch is targeted for Aug. 6. Photo credit: NASA/Tim Jacobs KSC-2009-2606

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, tech...

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift "stab" one of the three main engines on space shuttle Discovery to remove it. Engine removal is part of the... More

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, a technician using a Hyster forklift begins removing one of the three main engines on space shuttle Discovery. Engine removal is part of the post-landing processing. Discovery completed the STS-119 mission March 28 with a landing at Kennedy's Shuttle Landing Facility. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery next will be used on the STS-128 mission to deliver supplies and equipment to the International Space Station. The launch is targeted for Aug. 6. Photo credit: NASA/Tim Jacobs KSC-2009-2608

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, a te...

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, a technician using a Hyster forklift begins removing one of the three main engines on space shuttle Discovery. Engine removal is part of the po... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, a Hyster forklift is moved into position to remove engine no. 2 from space shuttle Endeavour. Engine removal is part of the post-landing processing. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4698

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, a Hyster forklift is moved into position to remove engine no. 2 from space shuttle Endeavour. Engine removal is par... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift have removed main engine no. 2 from space shuttle Endeavour. Engine removal is part of the post-landing processing. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4704

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift have removed main engine no. 2 from space shuttle Endeavour. Engine removal is ... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, a technician maneuvers a Hyster forklift into main engine no. 2 on space shuttle Endeavour to remove it. Engine removal is part of the post-landing processing. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4701

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, a technician maneuvers a Hyster forklift into main engine no. 2 on space shuttle Endeavour to remove it. Engine remo... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift remove main engine no. 2 from space shuttle Endeavour. Engine removal is part of the post-landing processing. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4703

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift remove main engine no. 2 from space shuttle Endeavour. Engine removal is part o... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, the Hyster forklift holds main engine no. 1 removed from space shuttle Endeavour. Engine removal is part of the post-landing processing; engine no. 2 was removed Aug. 17. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4770

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, the Hyster forklift holds main engine no. 1 removed from space shuttle Endeavour. Engine removal is part of the pos... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, a Hyster forklift is moved into position to remove main engine no. 1 from space shuttle Endeavour. Engine removal is part of the post-landing processing; engine no. 2 was removed Aug. 17. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4763

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, a Hyster forklift is moved into position to remove main engine no. 1 from space shuttle Endeavour. Engine removal i... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians focus on moving the Hyster forklift into position to remove main engine no. 1 from space shuttle Endeavour. Engine removal is part of the post-landing processing; engine no. 2 was removed Aug. 17. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4764

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy S...

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians focus on moving the Hyster forklift into position to remove main engine no. 1 from space shuttle Endeavo... More

Previous

of 3

Next