italian built

kennedy space center

module

nasa

payload

space shuttle

sts

mission sts

italian built module

45 media by topic ∙ page 1 of 1
KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, fo...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connectin... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, fo...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connectin... More

Visitors watch processing of the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS) from a new tour stop in the Space Station Processing Facility. The Italian-built module, named Leonardo, is one of three from Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc893

Visitors watch processing of the first Multi-Purpose Logistics Module ...

Visitors watch processing of the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS) from a new tour stop in the Space Station Processing Facility. The Italian-built module, na... More

The first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS) sits on the work stand where it will undergo testing in the Space Station Processing Facility. The Italian-built module, named Leonardo, is one of three from Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc891

The first Multi-Purpose Logistics Module (MPLM) for the International ...

The first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS) sits on the work stand where it will undergo testing in the Space Station Processing Facility. The Italian-built module,... More

KENNEDY SPACE CENTER, FLA. -- Technicians from Boeing and Alenia Aerospazio work to remove the end cap from the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS) during testing in the Space Station Processing Facility. The Italian-built module, named Leonardo, is one of three from Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc894

KENNEDY SPACE CENTER, FLA. -- Technicians from Boeing and Alenia Aeros...

KENNEDY SPACE CENTER, FLA. -- Technicians from Boeing and Alenia Aerospazio work to remove the end cap from the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS) during testi... More

KENNEDY SPACE CENTER, FLA. -- The inside of the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS) is seen after the end cap is removed. The Italian-built module, named Leonardo, is undergoing testing at the Space Station Processing Facility. It is one of three from Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc897

KENNEDY SPACE CENTER, FLA. -- The inside of the first Multi-Purpose Lo...

KENNEDY SPACE CENTER, FLA. -- The inside of the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS) is seen after the end cap is removed. The Italian-built module, named Leonar... More

KENNEDY SPACE CENTER, FLA. -- Technicians and workers watch as the Rack Insertion Device (at left) moves the end cap away from the first Multi-Purpose Logistics Module (MPLM) (at right) for the International Space Station (ISS). The Italian-built module, named Leonardo, is undergoing testing at the Space Station Processing Facility. It is one of three from Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc899

KENNEDY SPACE CENTER, FLA. -- Technicians and workers watch as the Rac...

KENNEDY SPACE CENTER, FLA. -- Technicians and workers watch as the Rack Insertion Device (at left) moves the end cap away from the first Multi-Purpose Logistics Module (MPLM) (at right) for the International Sp... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, technicians from Boeing and Alenia Aerospazio watch as the end cap is removed from the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). The Italian-built module, named Leonardo, is one of three from Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc895

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, technicians from Boeing and Alenia Aerospazio watch as the end cap is removed from the first Multi-Purpose Logistics Module (MPLM) for the... More

KENNEDY SPACE CENTER, FLA. -- Technicians and workers watch as the Rack Insertion Device (at left) removes the end cap from the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). The Italian-built module, named Leonardo, is undergoing testing at the Space Station Processing Facility. It is one of three from Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc898

KENNEDY SPACE CENTER, FLA. -- Technicians and workers watch as the Rac...

KENNEDY SPACE CENTER, FLA. -- Technicians and workers watch as the Rack Insertion Device (at left) removes the end cap from the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (I... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, technicians from Boeing and Alenia Aerospazio (above) as well as KSC workers (below) watch as the end cap is removed from the first Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). The Italian-built module, named Leonardo, is one of three from Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc896

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, technicians from Boeing and Alenia Aerospazio (above) as well as KSC workers (below) watch as the end cap is removed from the first Multi-... More

Michael Kinnan (left), with International Space Station (ISS) Launch Site Integration Office, and Todd McIntyre, with ISS International Elements, review paperwork for the Multi-Purpose Logistics Module (MPLM) in the Space Station Processing Facility at KSC. The Italian-built module, named Leonardo, is one of three to be provided by Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. In the background, technicians from The Boeing Company and Alenia Aerospazio are preparing the first MPLM for flight. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc905

Michael Kinnan (left), with International Space Station (ISS) Launch S...

Michael Kinnan (left), with International Space Station (ISS) Launch Site Integration Office, and Todd McIntyre, with ISS International Elements, review paperwork for the Multi-Purpose Logistics Module (MPLM) i... More

Michael Kinnan (left), with International Space Station (ISS) Launch Site Integration Office, and Todd McIntyre, with ISS International Elements, review paperwork for the Multi-Purpose Logistics Module (MPLM) in the Space Station Processing Facility at KSC. The Italian-built module, named Leonardo, is one of three to be provided by Alenia Aerospazio, and will be operated by NASA and supported by ASI, the Italian space agency. In the background, technicians from The Boeing Company and Alenia Aerospazio are preparing the first MPLM for flight. The MPLMs will be carried in the payload bay of a Shuttle orbiter, and will provide storage and additional work space for up to two astronauts when docked to the ISS. Leonardo is scheduled to be launched on STS-100 in December 1999. The second MPLM, named Raffaello, is scheduled to be handed over in April 1999. A third module, to be named Donatello, is due to be delivered in October 2000 for launch in January 2001 KSC-98pc906

Michael Kinnan (left), with International Space Station (ISS) Launch S...

Michael Kinnan (left), with International Space Station (ISS) Launch Site Integration Office, and Todd McIntyre, with ISS International Elements, review paperwork for the Multi-Purpose Logistics Module (MPLM) i... More

KKENNEDY SPACE CENTER, FLA. - A Beluga aircraft arrives at the Shuttle Landing Facility with its cargo of the Italian-built module, U.S. Node 2, for the International Space Station. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KKENNEDY SPACE CENTER, FLA. - A Beluga aircraft arrives at the Shuttl...

KKENNEDY SPACE CENTER, FLA. - A Beluga aircraft arrives at the Shuttle Landing Facility with its cargo of the Italian-built module, U.S. Node 2, for the International Space Station. The second of three Statio... More

KENNEDY SPACE CENTER, FLA. - A Beluga aircraft arrives at the Shuttle Landing Facility with its cargo of the Italian-built module, U.S. Node 2, for the International Space Station. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - A Beluga aircraft arrives at the Shuttle ...

KENNEDY SPACE CENTER, FLA. - A Beluga aircraft arrives at the Shuttle Landing Facility with its cargo of the Italian-built module, U.S. Node 2, for the International Space Station. The second of three Station ... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, moves past the Vehicle Assembly Building as it is transferred to the Space Station Processing Facility. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, m...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, moves past the Vehicle Assembly Building as it is transferred to the Space Station Processing Facility. The second of three connecting module... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, begins its transfer from the Shuttle Landing Facility to the Space Station Processing Facility. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, b...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, begins its transfer from the Shuttle Landing Facility to the Space Station Processing Facility. The second of three connecting modules on t... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, arrives at the Space Station Processing Facility after its move from the Shuttle Landing Facility. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, a...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, arrives at the Space Station Processing Facility after its move from the Shuttle Landing Facility. The second of three connecting modules on ... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, waits at the Space Station Processing Facility for the door to open. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, w...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, waits at the Space Station Processing Facility for the door to open. The second of three connecting modules on the International Space Statio... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, is secured on a transporter after its arrival at the Shuttle Landing Facility. It will be taken to the Space Station Processing Facility. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, i...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, is secured on a transporter after its arrival at the Shuttle Landing Facility. It will be taken to the Space Station Processing Facility. T... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, fo...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga at the Shuttle Landing Facility. The second of three Station connecting modules... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, fo...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connecti... More

KENNEDY SPACE CENTER, FLA. - At the Shuttle Landing Facility, the nose of the Beluga aircraft is open to offload the Italian-built module, U.S. Node 2, for the International Space Station. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - At the Shuttle Landing Facility, the nose...

KENNEDY SPACE CENTER, FLA. - At the Shuttle Landing Facility, the nose of the Beluga aircraft is open to offload the Italian-built module, U.S. Node 2, for the International Space Station. The second of three ... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, fo...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connectin... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, moves past the Beluga aircraft that brought it to KSC as it is transferred to the Space Station Processing Facility. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, m...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, moves past the Beluga aircraft that brought it to KSC as it is transferred to the Space Station Processing Facility. The second of three conn... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, fo...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga at the Shuttle Landing Facility. The second of three Station connecting modules... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, begins its transfer from the Shuttle Landing Facility to the Space Station Processing Facility. Inthe background, left, is the Beluga aircraft that brought it to KSC. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, b...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, begins its transfer from the Shuttle Landing Facility to the Space Station Processing Facility. Inthe background, left, is the Beluga aircr... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station after offloading from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, fo...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station after offloading from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station conne... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, is moved into the Space Station Processing Facility. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, i...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, is moved into the Space Station Processing Facility. The second of three connecting modules on the International Space Station, Node 2 attach... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, is lowered onto a transporter after its arrival at the Shuttle Landing Facility. It will be taken to the Space Station Processing Facility. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, i...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, is lowered onto a transporter after its arrival at the Shuttle Landing Facility. It will be taken to the Space Station Processing Facility. ... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, fo...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connectin... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, fo...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga at the Shuttle Landing Facility. The second of three Station connecting modules... More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, nears the Space Station Processing Facility after its move from the Shuttle Landing Facility. The second of three connecting modules on the International Space Station, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, n...

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, nears the Space Station Processing Facility after its move from the Shuttle Landing Facility. The second of three connecting modules on the I... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane moves the U.S. Node 2 module, known as Harmony, to the payload canister in another area of the facility. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2524

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facilit...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane moves the U.S. Node 2 module, known as Harmony, to the payload canister in another area of the facility. The canister ... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane lifts the U.S. Node 2 module, known as Harmony, from its stand. The crane will transfer the module to the payload canister in another area of the facility. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2523

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facili...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane lifts the U.S. Node 2 module, known as Harmony, from its stand. The crane will transfer the module to the payload can... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane moves the U.S. Node 2 module, known as Harmony, to the payload canister waiting at right. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2525

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facili...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane moves the U.S. Node 2 module, known as Harmony, to the payload canister waiting at right. The canister will deliver H... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, the U.S. Node 2 module, known as Harmony, is moved toward the waiting payload canister, at right. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2529

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facili...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, the U.S. Node 2 module, known as Harmony, is moved toward the waiting payload canister, at right. The canister will deliver Harmony to ... More

KENNEDY SPACE CENTER, FLA. -- An overhead crane moves over the U.S. Node 2 module, known as Harmony, in the Space Station Processing Facility. The crane will lift the module and transfer it to the payload canister in another area of the facility. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2520

KENNEDY SPACE CENTER, FLA. -- An overhead crane moves over the U.S. N...

KENNEDY SPACE CENTER, FLA. -- An overhead crane moves over the U.S. Node 2 module, known as Harmony, in the Space Station Processing Facility. The crane will lift the module and transfer it to the payload can... More

KENNEDY SPACE CENTER, FLA. -- The overhead crane lowers the U.S. Node 2 module, known as Harmony, into the payload canister in the Space Station Processing Facility. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2531

KENNEDY SPACE CENTER, FLA. -- The overhead crane lowers the U.S. Node...

KENNEDY SPACE CENTER, FLA. -- The overhead crane lowers the U.S. Node 2 module, known as Harmony, into the payload canister in the Space Station Processing Facility. The Italian-built module is about 21 feet l... More

KENNEDY SPACE CENTER, FLA. -- Technicians in the Space Station Processing Facility attach an overhead crane to the U.S. Node 2 module, known as Harmony. The crane will lift the module and transfer it to the payload canister in another area of the facility. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2522

KENNEDY SPACE CENTER, FLA. -- Technicians in the Space Station Proces...

KENNEDY SPACE CENTER, FLA. -- Technicians in the Space Station Processing Facility attach an overhead crane to the U.S. Node 2 module, known as Harmony. The crane will lift the module and transfer it to the pa... More

KENNEDY SPACE CENTER, FLA. -- Technicians in the Space Station Processing Facility attach an overhead crane to the U.S. Node 2 module, known as Harmony. The crane will lift the module and transfer it to the payload canister in another area of the facility. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2521

KENNEDY SPACE CENTER, FLA. -- Technicians in the Space Station Proce...

KENNEDY SPACE CENTER, FLA. -- Technicians in the Space Station Processing Facility attach an overhead crane to the U.S. Node 2 module, known as Harmony. The crane will lift the module and transfer it to the p... More

KENNEDY SPACE CENTER, FLA. -- The U.S. Node 2 module, known as Harmony, is lowered into the waiting payload canister in the Space Station Processing Facility. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2530

KENNEDY SPACE CENTER, FLA. -- The U.S. Node 2 module, known as Harmon...

KENNEDY SPACE CENTER, FLA. -- The U.S. Node 2 module, known as Harmony, is lowered into the waiting payload canister in the Space Station Processing Facility. The canister will deliver Harmony to Launch Pad 3... More

KENNEDY SPACE CENTER, FLA. -- A closeup of the U.S. Node 2 module, known as Harmony, suspended above the floor of the Space Station Processing Facility as the module is transferred to the payload canister. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2526

KENNEDY SPACE CENTER, FLA. -- A closeup of the U.S. Node 2 module, kn...

KENNEDY SPACE CENTER, FLA. -- A closeup of the U.S. Node 2 module, known as Harmony, suspended above the floor of the Space Station Processing Facility as the module is transferred to the payload canister. Th... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, the U.S. Node 2 module, known as Harmony, is moved toward the waiting payload canister, at right. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2528

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facili...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, the U.S. Node 2 module, known as Harmony, is moved toward the waiting payload canister, at right. The canister will deliver Harmony to ... More

KENNEDY SPACE CENTER, FLA. -- The U.S. Node 2 module, known as Harmony, is ready to be transferred to the payload canister in the Space Station Processing Facility. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2519

KENNEDY SPACE CENTER, FLA. -- The U.S. Node 2 module, known as Harmon...

KENNEDY SPACE CENTER, FLA. -- The U.S. Node 2 module, known as Harmony, is ready to be transferred to the payload canister in the Space Station Processing Facility. The canister will deliver Harmony to Launch... More

KENNEDY SPACE CENTER, FLA. -- The U.S. Node 2 module, known as Harmony, is moved above the floor of the Space Station Processing Facility toward the waiting payload canister, at right. The canister will deliver Harmony to Launch Pad 39A for installation into space shuttle Discovery's payload bay. The Italian-built module is about 21 feet long and 14 feet in diameter. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Harmony will be installed on the station during mission STS-120, targeted to launch Oct. 23. Photo credit: NASA/Amanda Diller KSC-07pd2527

KENNEDY SPACE CENTER, FLA. -- The U.S. Node 2 module, known as Harmon...

KENNEDY SPACE CENTER, FLA. -- The U.S. Node 2 module, known as Harmony, is moved above the floor of the Space Station Processing Facility toward the waiting payload canister, at right. The canister will deliv... More