kennedy space center

nasa

payloads

laboratory

science

apex

biotube

bric

ksc payloads

22 media by topic ∙ page 1 of 1
KSC payloads processing employees work to reservice the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the Space Shuttle Orbiter Columbia’s payload bay for the STS-94 mission in Orbiter Processing Facility 1. That mission is now scheduled to lift off in early July. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for quick relaunch turnaround times for future payloads. The Spacelab module was scheduled to fly again with the full complement of STS-83 experiments after that mission was cut short due to a faulty fuel cell. During the scheduled 16-day STS-94 mission, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments KSC-97pc761

KSC payloads processing employees work to reservice the Microgravity S...

KSC payloads processing employees work to reservice the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the Space Shuttle Orbiter Columbia’s payload bay for the STS-94 mission in Orbiter Processing... More

While KSC workers in the Launch Complex 39 Area watch, The Space Shuttle Orbiter Columbia rolls over to the Vehicle Assembly Building (VAB) June 4 from Orbiter Processing Facility (OPF)1 atop its transporter in preparation for the STS-94 mission. Once inside the VAB, Columbia will be hoisted to be mated with its solid rocket boosters and external tank. Columbia was moved to the OPF April 8 after the completion of the STS-83 mission. KSC payloads processing employees then began work to reservice the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the orbiter’s payload bay for the STS-94 mission. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for possible quick relaunch turnaround times for future payloads. The MSL-1 module will fly again with the full complement of STS-83 experiments after that mission was cut short due to indications of a faulty fuel cell. During the scheduled 16-day STS-94 mission, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments KSC-97PC879

While KSC workers in the Launch Complex 39 Area watch, The Space Shut...

While KSC workers in the Launch Complex 39 Area watch, The Space Shuttle Orbiter Columbia rolls over to the Vehicle Assembly Building (VAB) June 4 from Orbiter Processing Facility (OPF)1 atop its transporter ... More

The Space Shuttle Orbiter Columbia is reflected in a nearby pond as it rolls over to the Vehicle Assembly Building (VAB) June 4 from Orbiter Processing Facility (OPF) 1 atop its transporter in preparation for the STS-94 mission. Once inside the VAB, Columbia will be hoisted to be mated with its solid rocket boosters and external tank. Columbia was moved to the OPF April 8 after the completion of the STS-83 mission. KSC payloads processing employees then began work to reservice the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the orbiter’s payload bay for the STS-94 mission. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for possible quick relaunch turnaround times for future payloads. The MSL-1 module will fly again with the full complement of STS-83 experiments after that mission was cut short due to indications of a faulty fuel cell. During the scheduled 16-day STS-94 mission, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments KSC-97PC880

The Space Shuttle Orbiter Columbia is reflected in a nearby pond as i...

The Space Shuttle Orbiter Columbia is reflected in a nearby pond as it rolls over to the Vehicle Assembly Building (VAB) June 4 from Orbiter Processing Facility (OPF) 1 atop its transporter in preparation for... More

A KSC payloads processing employee removes a protective sheath part of the Node 1 in its work stand in the Space Station Processing Facility. The module is the first element of the International Space Station to be manufactured in the United States and the first scheduled to be launched on the Space Shuttle. The Node 1 is currently scheduled to lift off aboard the Space Shuttle Endeavour in July 1998, along with Pressurized Mating Adapters (PMAs) 1 and 2. The 18-foot-in-diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at Marshall Space Flight Center. Once in space, the Node 1 will function as a connecting passageway to the living and working areas of the International Space Station. It has six hatches that will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other space station elements KSC-97PC939

A KSC payloads processing employee removes a protective sheath part ...

A KSC payloads processing employee removes a protective sheath part of the Node 1 in its work stand in the Space Station Processing Facility. The module is the first element of the International Space Stati... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, portions of the Advanced Plant Experiment, or APEX, experiment are checked out as it is prepared for la... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, QinetiQ North America Project Manager Carole Miller prepares the Biotube experiment which will be launc... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Terry Tullis, a QinetiQ North America mechanical engineer, prepares the Biological Research In Canister... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Terry Tullis, a QinetiQ North America mechanical engineer, prepares the Biological Research In Canister... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the Biotube experiment is being prepared for launch to the International Space Station aboard a SpaceX ... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Terry Tullis, a QinetiQ North America mechanical engineer, places the Biological Research In Canisters,... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the Biological Research In Canisters, or BRIC, 18-1 and 18-2 experiments are prepared for launch to the... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, portions of the Advanced Plant Experiment, or APEX, experiment are checked out as it is prepared for la... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a portion of the Advanced Plant Experiment, or APEX, experiment is checked out as it is prepared for la... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, QinetiQ North America Project Manager Carole Miller, left, works with Allison Caron, a QinetiQ mechanic... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Allison Caron, a QinetiQ mechanical engineer, checks out part of the Biotube experiment which will be l... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Terry Tullis, a QinetiQ North America mechanical engineer, prepares the Biological Research In Canister... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Donald Houzer, a QinetiQ North America mechanical technician checks out the Advanced Plant Experiment, ... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, John Carver, a project manager with Jacobs Technology checks the Advanced Plant Experiment, or APEX, ex... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the Biological Research In Canisters, or BRIC, 18-1 and 18-2 experiments are prepared for launch to the... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, equipment supporting the Advanced Plant Experiment, or APEX, experiment is being prepared for launch to... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, QinetiQ North America Project Manager Carole Miller, left, works with Allison Caron, a QinetiQ mechanic... More

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

SpaceX-3 KSC Payloads: Biotube, Bric, Apex2-2

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, QinetiQ North America Project Manager Carole Miller, left, works with Allison Caron, a QinetiQ mechanic... More