Cranes place the P-1 truss, a component of the International Space Station, on a transport vehicle that will move it to the Operations and Checkout Building for processing. The truss had been temporarily stored in the RLV hangar in the background as a precaution against approaching bad weather. The P-1 truss, scheduled to fly in spring of 2002, is part of a total 10-truss, girder-like structure on the Station that will ultimately extend the length of a football field. Astronauts will attach the 14-by-15 foot structure to the port side of the center truss, S0, during the spring assembly flight. The 33,000-pound P-1 will house the thermal radiator rotating joint (TRRJ) that will rotate the Station’s radiators away from the sun to increase their maximum cooling efficiency KSC-00pp1044

Similar

Expedition 9 Soyuz Assembly. NASA public domain image colelction.

At the Baikonur Cosmodrome in Kazakhstan, Expedition 36/37 backup Flight Engineer Koichi Wakata of the Japan Aerospace Exploration Agency boards the Soyuz TMA-09M spacecraft in the Integration Facility May 24 in support of the final “fit check” dress rehearsal by the prime and backup crews. Wakata is supporting prime crewmembers Flight Engineer Karen Nyberg of NASA, Soyuz Commander Fyodor Yurchikhin and Flight Engineer Luca Parmitano of the European Space Agency, who are preparing for launch May 29, Kazakh time, in the Soyuz to begin a 5 ½ month mission on the International Space Station. NASA/Victor Zelentsov jsc2013e048416

Columbiana County Port Authority, Wellsville Intermodal Facility Wellsville, Ohio USA. Ares 1-X

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is suspended vertically just above the floor. Designated ET-119, the 154-foot tank will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0422

WINDMILL GENERATOR LIFT IN CULEBRA PUERTO RICO

CAPE CANAVERAL, Fla. – The covered fifth segment simulator center for the Ares I-X rocket arrives in the transfer aisle of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. It will join other segments being stacked there. Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. Ares I is the essential core of a safe, reliable, cost-effective space transportation system that eventually will carry crewed missions back to the moon, on to Mars and out into the solar system. Ares I-X is targeted for launch in July 2009. Photo credit: NASA/Troy Cryder KSC-2009-1705

Cranes place the P-1 truss, a component of the International Space Station, on a transport vehicle that will move it to the Operations and Checkout Building for processing. The truss had been temporarily stored in the RLV hangar in the background as a precaution against approaching bad weather. The P-1 truss, scheduled to fly in spring of 2002, is part of a total 10-truss, girder-like structure on the Station that will ultimately extend the length of a football field. Astronauts will attach the 14-by-15 foot structure to the port side of the center truss, S0, during the spring assembly flight. The 33,000-pound P-1 will house the thermal radiator rotating joint (TRRJ) that will rotate the Station’s radiators away from the sun to increase their maximum cooling efficiency KSC-00pp1044

description

Summary

Cranes place the P-1 truss, a component of the International Space Station, on a transport vehicle that will move it to the Operations and Checkout Building for processing. The truss had been temporarily stored in the RLV hangar in the background as a precaution against approaching bad weather. The P-1 truss, scheduled to fly in spring of 2002, is part of a total 10-truss, girder-like structure on the Station that will ultimately extend the length of a football field. Astronauts will attach the 14-by-15 foot structure to the port side of the center truss, S0, during the spring assembly flight. The 33,000-pound P-1 will house the thermal radiator rotating joint (TRRJ) that will rotate the Station’s radiators away from the sun to increase their maximum cooling efficiency

date_range

Date

27/07/2000

place

Location

Kennedy Space Center, FL

create

Source

NASA

link

Link

https://images.nasa.gov/

Public Domain Dedication (CC0)

Similar

Related

Explore more