kennedy space center

nasa

sts

equipment

interface

test

space shuttle

international space station

crew equipment interface test

1,026 media by topic ∙ page 1 of 11
In Orbiter Processing Facility bay 3, STS-106 Mission Specialists Yuri I. Malenchenko (left) and Edward T. Lu (beside him) familiarize themselves with equipment in the payload bay of Space Shuttle orbiter Atlantis with the help of KSC employees as part of Crew Equipment Interface Test (CEIT) activities for their mission. The other crew members are Commander Terrence W. Wilcutt, Pilot Scott D. Altman, and Mission Specialists Daniel C. Burbank, Boris V. Morukov and Richard A. Mastracchio. Malenchenko and Morukov represent the Russian Aviation and Space Agency. On the 11-day mission, the seven-member crew will perform support tasks on orbit, transfer supplies and prepare the living quarters in the newly arrived Zvezda Service Module for the first long-duration crew, dubbed "Expedition One," which is due to arrive at the Station in late fall. STS-106 is scheduled to launch Sept. 8, 2000, at 8:31 a.m. EDT from Launch Pad 39B KSC-00pp0995

In Orbiter Processing Facility bay 3, STS-106 Mission Specialists Yuri...

In Orbiter Processing Facility bay 3, STS-106 Mission Specialists Yuri I. Malenchenko (left) and Edward T. Lu (beside him) familiarize themselves with equipment in the payload bay of Space Shuttle orbiter Atlan... More

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-122 Mission Specialist Rex Walheim reaches toward the wing of space shuttle Atlantis. The crew is at Kennedy to take part in a crew equipment interface test, or CEIT, which helps familiarize them with equipment and payloads for the mission. Among the activities standard to a CEIT are harness training, inspection of the thermal protection system and camera operation for planned extravehicular activities, or EVAs. STS-122 is targeted for launch in December. Photo credit: NASA/Kim Shiflett KSC-07pd2612

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-...

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-122 Mission Specialist Rex Walheim reaches toward the wing of space shuttle Atlantis. The crew is at Kennedy to take part in a crew equipme... More

KENNEDY SPACE CENTER, FLA. - The STS-120 crew is at Kennedy for a crew equipment interface test, or CEIT. Giving a close inspection to space shuttle Discovery in Orbiter Processing Facility bay 3 are Mission Specialist Stephanie D. Wilson and Commander Pamela A. Melroy. Among the activities standard to a CEIT are harness training, inspection of the thermal protection system and camera operation for planned extravehicular activities, or EVAs. The STS-120 mission will deliver the Harmony module, christened after a school contest, which will provide attachment points for European and Japanese laboratory modules on the International Space Station. Known in technical circles as Node 2, it is similar to the six-sided Unity module that links the U.S. and Russian sections of the station. Built in Italy for the United States, Harmony will be the first new U.S. pressurized component to be added. The STS-120 mission is targeted to launch on Oct. 20. Photo credit: NASA/George Shelton KSC-07pd2196

KENNEDY SPACE CENTER, FLA. - The STS-120 crew is at Kennedy for a crew...

KENNEDY SPACE CENTER, FLA. - The STS-120 crew is at Kennedy for a crew equipment interface test, or CEIT. Giving a close inspection to space shuttle Discovery in Orbiter Processing Facility bay 3 are Mission S... More

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, members of space shuttle Discovery's STS-131 crew participate in training activities during the Crew Equipment Interface Test, or CEIT, for their mission. Here, buckets are used to lower the crew members and their trainers into Discovery's payload bay without damaging the bay's lining. The CEIT provides the crew with hands-on training and observation of shuttle and flight hardware. The seven-member crew will deliver the multi-purpose logistics module Leonardo, filled with resupply stowage platforms and racks to be transferred to locations around the International Space Station. Three spacewalks will include work to attach a spare ammonia tank assembly to the station's exterior and return a European experiment from outside the station's Columbus module. Discovery's launch is targeted for March 18. For information on the STS-131 mission and crew, visit http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts131/index.html. Photo credit: NASA/Kim Shiflett KSC-2010-1149

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 3 at NASA's Kenn...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, members of space shuttle Discovery's STS-131 crew participate in training activities during the Crew Equipment ... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-122 crew members inspect the Columbus European Laboratory, part of the payload on their mission. Seen here is Commander Steve Frick. The crew is participating in a crew equipment interface test that provides opportunities for hands-on experience with payloads and equipment. The other crew members are Pilot Alan Poindexter and Mission Specialists Rex Walheim, Stan Love, Leland Melvin and Hans Schlegel, who represents the European Space Agency. The 24th mission to the International Space Station, STS-122 will also include the Multi-Purpose Experiment Support Structure - Non-Deployable (MPESS-ND). Launch of STS-122 on Space Shuttle Discovery is scheduled no earlier than October. Photo credit: NASA/Kim Shiflett KSC-07pd0058

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facilit...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-122 crew members inspect the Columbus European Laboratory, part of the payload on their mission. Seen here is Commander Steve Frick.... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. From left are Mission Specialists Steve Bowen and Heidemarie Stefanyshyn-Piper. The CEIT provides hands-on experience with hardware and equipment slated to fly on their mission. Endeavour will deliver a multi-purpose logistics module to the International Space Station on the STS-126 mission. Launch is targeted for Nov. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2239

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kenn...

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. From left are ... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. Shown here is Mission Specialist Shane Kimbrough. The CEIT provides hands-on experience with hardware and equipment slated to fly on their mission. Endeavour will deliver a multi-purpose logistics module to the International Space Station on the STS-126 mission. Launch is targeted for Nov. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2230

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kenn...

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. Shown here is ... More

CAPE CANAVERAL, Fla. -- At SPACEHAB in Titusville, Fla., STS-127 Mission Specialist Christopher Cassidy gets a close look at the Pump Module Assembly, part of the payload for the mission. The crew members are at Kennedy for a crew equipment interface test, or CEIT, which provides experience handling tools, equipment and hardware they will use on the mission. The payload will be launched to the International Space Station aboard space shuttle Endeavour on the STS-127 mission, targeted for launch on May 15, 2009. Photo credit: NASA/Dimitrios Gerondidakis KSC-08pd4039

CAPE CANAVERAL, Fla. -- At SPACEHAB in Titusville, Fla., STS-127 Miss...

CAPE CANAVERAL, Fla. -- At SPACEHAB in Titusville, Fla., STS-127 Mission Specialist Christopher Cassidy gets a close look at the Pump Module Assembly, part of the payload for the mission. The crew members are ... More

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. Here, Commander Chris Ferguson, second from right, and Mission Specialist Heidemarie Stefanyshyn-Piper, right, are dressed in clean room attire for a walkthrough of the multi-purpose logistics module. The CEIT provides hands-on experience with hardware and equipment slated to fly on their mission. Endeavour will deliver a multi-purpose logistics module to the International Space Station on the STS-126 mission. Launch is targeted for Nov. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2214

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NAS...

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. Here, ... More

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialist Michael Good checks out part of the equipment in space shuttle Atlantis' payload bay. Equipment familiarization is part of the crew equipment interface test, which provides hands-on experience with hardware and equipment for the mission. Atlantis is targeted to launch Oct. 8 on the STS-125 mission to service the Hubble Space Telescope. The mission crew will perform history-making, on-orbit “surgery” on two important science instruments aboard the telescope. After capturing the telescope, two teams of spacewalking astronauts will perform the repairs during five planned spacewalks. Photo credit: NASA/Kim Shiflett KSC-08pd1957

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's K...

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialist Michael Good checks out part of the equipment in space shuttle Atlantis' payload bay. Equip... More

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. Here, from left, Mission Specialists Sandra Magnus and Heidemarie Stefanyshyn-Piper, and Pilot Eric Boe are dressed in clean room attire for a walkthrough of the multi-purpose logistics module. The CEIT provides hands-on experience with hardware and equipment slated to fly on their mission. Endeavour will deliver a multi-purpose logistics module to the International Space Station on the STS-126 mission. Launch is targeted for Nov. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2217

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NA...

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. Here,... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-122 crew members inspect the Multi-Purpose Experiment Support Structure - Non-Deployable (MPESS-ND), part of the payload on their mission. Here, Mission Specialist Stan Love (left) and Commander Steve Frick get a close look. The crew is participating in a crew equipment interface test that provides opportunities for hands-on experience with payloads and equipment. The other crew members are Pilot Alan Poindexter and Mission Specialists Rex Walheim, Leland Melvin and Hans Schlegel, who represents the European Space Agency. The 24th mission to the International Space Station, STS-122 will also include the Columbus European Laboratory. Launch of STS-122 on Space Shuttle Discovery is scheduled no earlier than October. Photo credit: NASA/Kim Shiflett KSC-07pd0061

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facilit...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-122 crew members inspect the Multi-Purpose Experiment Support Structure - Non-Deployable (MPESS-ND), part of the payload on their mis... More

CAPE CANAVERAL, Fla. –In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, STS-128 crew members check out the space shuttle Discovery's robotic arm. Seen here are Mission Specialists Christer Fuglesang and John "Danny" Olivas. The crew is at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on Discovery. Launch is targeted for Aug. 7. Photo credit: NASA/Jim Grossmann KSC-2009-3608

CAPE CANAVERAL, Fla. –In Orbiter Processing Facility 3 at NASA's Kenne...

CAPE CANAVERAL, Fla. –In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, STS-128 crew members check out the space shuttle Discovery's robotic arm. Seen here are Mission Specialists Chr... More

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, members of space shuttle Discovery's STS-131 crew participate in training activities during the Crew Equipment Interface Test, or CEIT, for their mission. Here, Mission Specialists Rick Mastracchio, left, and Clay Anderson review the placement of the hardware in Discovery's payload bay. The CEIT provides the crew with hands-on training and observation of shuttle and flight hardware. The seven-member crew will deliver the multi-purpose logistics module Leonardo, filled with resupply stowage platforms and racks to be transferred to locations around the International Space Station. Three spacewalks will include work to attach a spare ammonia tank assembly to the station's exterior and return a European experiment from outside the station's Columbus module. Discovery's launch is targeted for March 18. For information on the STS-131 mission and crew, visit http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts131/index.html. Photo credit: NASA/Kim Shiflett KSC-2010-1143

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 3 at NASA's Kenn...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, members of space shuttle Discovery's STS-131 crew participate in training activities during the Crew Equipment ... More

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Mission Specialist Michael Finke practices using a camera he'll be snapping photos with in space. The six STS-134 astronauts are at Kennedy participating in the Crew Equipment Interface Test (CEIT), which gives them an opportunity for hands-on training and familiarization of the payload they'll be delivering to the International Space Station. Space shuttle Endeavour is targeted to launch on the STS-134 mission Feb. 27, 2011. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Cory Huston KSC-2010-5549

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's...

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Mission Specialist Michael Finke practices using a camera he'll be snapping photos with in space. ... More

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, the STS-101 crew inspect equipment and payload for their mission. From left to right are Mission Specialist Edward Tsang Lu, Mary Ellen Weber (Ph.D.), Commander James D. Halsell Jr. and Pilot Scott J. "Doc" Horowitz (Ph.D). are taking part in a Crew Equipment Interface Test, which gives them an opportunity to look over equipment and payloads that will fly on the mission. Space Shuttle Atlantis will be carrying the SPACEHAB Double Module, which carries internal logistics and resupply cargo for station outfitting. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 13, 2000 KSC-00pp0024

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, the STS-...

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, the STS-101 crew inspect equipment and payload for their mission. From left to right are Mission Specialist Edward Tsang Lu, Mary Ellen Weber (Ph.D.... More

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-123 Mission Specialist Richard Linnehan inspects the thermal protection system tiles on the underside of space shuttle Endeavour. He and other crew members are at NASA's Kennedy Space Center for a crew equipment interface test, a process of familiarization with payloads, hardware and the space shuttle. The STS-123 mission is targeted for launch on space shuttle Endeavour on Feb. 14. It will be the 25th assembly flight of the station. Photo credit: NASA/Kim Shiflett KSC-07pd3561

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS...

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-123 Mission Specialist Richard Linnehan inspects the thermal protection system tiles on the underside of space shuttle Endeavour. He and ot... More

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-117 Pilot Lee Archambault checks out the cockpit of the orbiter Atlantis, the vehicle for the mission. He and other crew members are at KSC to take part in a Crew Equipment Interface Test that allows them opportunities to become familiar with equipment and hardware for their mission. STS-117 will deliver the S3/S4 and another pair of solar arrays to the space station. The 21st shuttle mission to the International Space Station, STS-117 is scheduled to launch no earlier than March 16. Photo credit: NASA/Kim Shiflett KSC-06pd2832

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-...

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-117 Pilot Lee Archambault checks out the cockpit of the orbiter Atlantis, the vehicle for the mission. He and other crew members are at KSC... More

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-123 crew members examine one of the cameras that will be used on the mission. From left are Mission Specialists Michael Foreman, Robert Behnken, Garrett Reismann and Richard Linnehan. Reisman will join the Expedition 16 crew on the International Space Station, replacing flight engineer Leopold Eyharts. These and other crew members are at NASA's Kennedy Space Center for a crew equipment interface test, a process of familiarization with payloads, hardware and the space shuttle. The STS-123 mission is targeted for launch on space shuttle Endeavour on Feb. 14. It will be the 25th assembly flight of the station. Photo credit: NASA/Kim Shiflett KSC-07pd3562A

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, ST...

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-123 crew members examine one of the cameras that will be used on the mission. From left are Mission Specialists Michael Foreman, Robert B... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, STS-128 crew members check out storage containers they will use on the mission. From left are Mission Specialists John "Danny" Olivas, Christer Fuglesang, Patrick Forrester and Jose Hernandez, and Commander Rick Sturckow (pointing). The crew is at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on Discovery. Launch is targeted for Aug. 7. Photo credit: NASA/Jim Grossmann KSC-2009-3595

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 3 at NASA's Kenn...

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, STS-128 crew members check out storage containers they will use on the mission. From left are Mission Speciali... More

KENNEDY SPACE CENTER, FLA. -- During a crew equipment interface test in the Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, STS-124 Mission Specialist Ronald Garan practices focusing a camera on the underside of space shuttle Discovery. At right is Mission Specialist Michael Fossum. The camera will be used on the mission. Discovery will transport the Kibo Japanese Experiment Module - Pressurized Module (JEM-PM) and the Japanese Remote Manipulator System (JEM-RMS) to the International Space Station to complete the Kibo laboratory. The launch of Discovery is targeted for April 24. Photo credit: NASA/Kim Shiflett KSC-08pd0310

KENNEDY SPACE CENTER, FLA. -- During a crew equipment interface test i...

KENNEDY SPACE CENTER, FLA. -- During a crew equipment interface test in the Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, STS-124 Mission Specialist Ronald Garan practices focusing a camera ... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, STS-126 crew members are lowered inside space shuttle Endeavour's payload bay to inspect hardware like the shuttle's robotic arm and orbiter boom sensor system. Members of space shuttle Endeavour's STS-126 crew are at Kennedy to participate in a crew equipment interface test, or CEIT. The CEIT provides experience handling tools, equipment and hardware they will use on the mission. Endeavour will deliver a multi-purpose logistics module to the International Space Station on the STS-126 mission. Launch is targeted for Nov. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2255

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Ken...

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, STS-126 crew members are lowered inside space shuttle Endeavour's payload bay to inspect hardware like the shuttle's robo... More

KENNEDY SPACE CENTER, FLA. -- During a crew equipment interface test in the Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, STS-124 Commander Mark Kelly closely examines a window in the cockpit of space shuttle Discovery. The shuttle will transport the Kibo Japanese Experiment Module - Pressurized Module (JEM-PM) and the Japanese Remote Manipulator System (JEM-RMS) to the International Space Station to complete the Kibo laboratory. The launch of Discovery is targeted for April 24. Photo credit: NASA/Kim Shiflett KSC-08pd0312

KENNEDY SPACE CENTER, FLA. -- During a crew equipment interface test i...

KENNEDY SPACE CENTER, FLA. -- During a crew equipment interface test in the Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, STS-124 Commander Mark Kelly closely examines a window in the cockpi... More

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility at NASA's Kennedy Space Center, space shuttle Endeavour's STS-123 Commander Dominic Gorie inspects the window in space shuttle Endeavour. The crew is at Kennedy for crew equipment interface test, a process of familiarization with payloads, hardware and the space shuttle. The STS-123 mission is targeted for launch on Feb. 14. It will be the 25th assembly flight of the station. Photo credit: NASA/Kim Shiflett KSC-07pd3504

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility at ...

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility at NASA's Kennedy Space Center, space shuttle Endeavour's STS-123 Commander Dominic Gorie inspects the window in space shuttle Endeavour. The ... More

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Commander Mark Kelly, left, and Pilot Gregory H. Johnson check out tools and equipment they'll be using in space. The six STS-134 astronauts are at Kennedy participating in the Crew Equipment Interface Test (CEIT), which gives them an opportunity for hands-on training and familiarization of the payload they'll be delivering to the International Space Station. Space shuttle Endeavour is targeted to launch on the STS-134 mission Feb. 27, 2011. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Cory Huston KSC-2010-5552

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's...

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Commander Mark Kelly, left, and Pilot Gregory H. Johnson check out tools and equipment they'll be ... More

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, looking over equipment for their mission are (far left) STS-101 Pilot Scott J. "Doc" Horowitz (Ph.D). and (second from right) Mission Specialist Edward Tsang Lu. Horowitz, Lu and other members of the crew are taking part in a Crew Equipment Interface Test, which gives them an opportunity to look over equipment and payloads that will fly on the mission. Space Shuttle Atlantis will be carrying the SPACEHAB Double Module, which carries internal logistics and resupply cargo for station outfitting. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 13, 2000 KSC-00pp0029

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, looking ...

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, looking over equipment for their mission are (far left) STS-101 Pilot Scott J. "Doc" Horowitz (Ph.D). and (second from right) Mission Specialist Edw... More

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, astronauts (from left) Christopher Cassidy, Doug Hurley, Dave Wolf and Tim Kopra look at equipment they will use on the STS-127 mission to the International Space Station. Hurley is the pilot and Cassidy, Wolf and Kopra are mission specialists. Kopra will remain on the station as part of the Expedition 19 crew. The crew members are at Kennedy for a crew equipment interface test, which provides hands-on training and observation of shuttle and flight hardware. Endeavour will deliver the Japanese Experiment Module's Experiment Logistics Module-Exposed Section, or ELM-ES, to the space station on STS-127. Launch is targeted for mid-June, 2009. Photo credit: NASA/Kim Shiflett KSC-2009-2118

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Ke...

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, astronauts (from left) Christopher Cassidy, Doug Hurley, Dave Wolf and Tim Kopra look at equipment they will ... More

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, STS-119 Mission Specialist Richard Arnold (right) practices using the camera to be used on the mission. Looking on is Mission Specialist Steve Swanson. The crew is at Kennedy for a Crew Equipment Interface Test that provides experience handling tools, equipment and hardware they will use on the mission. On the STS-119 mission, space shuttle Discovery will carry the S6 truss segment to complete the 361-foot-long backbone of the International Space Station. The truss includes the fourth pair of solar array wings and electronics that convert sunlight to power for the orbiting laboratory. Discovery is targeted for launch on Feb. 12, 2009. Photo credit: NASA/Kim Shiflett KSC-08pd3789

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility at NASA's K...

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, STS-119 Mission Specialist Richard Arnold (right) practices using the camera to be used on the mission. Loo... More

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew checks out the heat shield tiles that protect space shuttles during re-entry. From left, are Mission Specialists Greg Chamitoff and Andrew Feustel, Pilot Gregory H. Johnson, Commander Mark Kelly and Mission Specialist Roberto Vittori of the European Space Agency. The six STS-134 astronauts are at Kennedy participating in the Crew Equipment Interface Test (CEIT), which gives them an opportunity for hands-on training with the tools and equipment they'll use in space and familiarization of the payload they'll be delivering to the International Space Station. Space shuttle Endeavour is targeted to launch on the STS-134 mission Feb. 27, 2011. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Cory Huston KSC-2010-5539

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's...

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew checks out the heat shield tiles that protect space shuttles during re-entry. From left, ... More

CAPE CANAVERAL, Fla. -- In NASA Kennedy Space Center's Space Station Processing Facility, STS-129 Mission Specialist Randy Bresnik gets a close look at hardware installed on the Express Logistics Carrier, or ELC. The crew is at Kennedy for a Crew Equipment Interface Test, which provides hands-on training and observation of shuttle and flight hardware. The carrier is part of the STS-129 payload on space shuttle Atlantis, which will deliver to the International Space Station two spare gyroscopes, two nitrogen tank assemblies, two pump modules, an ammonia tank assembly and a spare latching end effector for the station's robotic arm. STS-129 is targeted to launch Nov. 12. Photo credit: NASA/Jim Grossmann KSC-2009-5080

CAPE CANAVERAL, Fla. -- In NASA Kennedy Space Center's Space Station P...

CAPE CANAVERAL, Fla. -- In NASA Kennedy Space Center's Space Station Processing Facility, STS-129 Mission Specialist Randy Bresnik gets a close look at hardware installed on the Express Logistics Carrier, or EL... More

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Commander Mark Kelly, left, and Mission Specialist Roberto Vittori with the European Space Agency check out a tool they'll be using in space. The six STS-134 astronauts are at Kennedy participating in the Crew Equipment Interface Test (CEIT), which gives them an opportunity for hands-on training and familiarization of the payload they'll be delivering to the International Space Station. Space shuttle Endeavour is targeted to launch on the STS-134 mission Feb. 27, 2011. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Cory Huston KSC-2010-5544

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's...

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Commander Mark Kelly, left, and Mission Specialist Roberto Vittori with the European Space Agency ... More

CAPE CANAVERAL, Fla. -- At SPACEHAB in Titusville, Fla., STS-127 crew members look at the SGANT (Space to Ground Antenna) at left and the pump module assembly at right, all attached to the Integrated Cargo Carrier-VLD (Vertical Light Deployment), part of the payload for the mission. The crew members are at Kennedy for a crew equipment interface test, or CEIT, which provides experience handling tools, equipment and hardware they will use on the mission. The payload will be launched to the International Space Station aboard space shuttle Endeavour on the STS-127 mission, targeted for launch on May 15, 2009. Photo credit: NASA/Dimitrios Gerondidakis KSC-08pd4034

CAPE CANAVERAL, Fla. -- At SPACEHAB in Titusville, Fla., STS-127 crew...

CAPE CANAVERAL, Fla. -- At SPACEHAB in Titusville, Fla., STS-127 crew members look at the SGANT (Space to Ground Antenna) at left and the pump module assembly at right, all attached to the Integrated Cargo Car... More

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. From left in the blue flight suits are Mission Specialists Donald Pettit and Heidemarie Stefanyshyn-Piper, Commander Chris Ferguson and Mission Specialist Shane Kimbrough. The CEIT provides hands-on experience with hardware and equipment slated to fly on their mission. Endeavour will deliver a multi-purpose logistics module to the International Space Station on the STS-126 mission. Launch is targeted for Nov. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2226

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kenn...

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT. From left in t... More

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, technicians help STS-101 Mission Specialist Edward Tsang Lu become familiar with equipment for the mission. Lu and other members of the crew are taking part in a Crew Equipment Interface Test, which gives them an opportunity to look over equipment and payloads that will fly on the mission. Space Shuttle Atlantis will be carrying the SPACEHAB Double Module, which carries internal logistics and resupply cargo for station outfitting. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 13, 2000 KSC-00pp0030

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, technici...

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, technicians help STS-101 Mission Specialist Edward Tsang Lu become familiar with equipment for the mission. Lu and other members of the crew are tak... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Orbiter Processing Facility bay 3, STS-121 Pilot Mark Kelly works with equipment that will be on the mission. The crew is at Kennedy to take part in the crew equipment interface test, which provides hands-on experience with equipment to be used on-orbit. Launch of Space Shuttle Discovery on mission STS-121, the second return-to-flight mission, is scheduled no earlier than May. KSC-06pd0314

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Orbiter Pr...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Orbiter Processing Facility bay 3, STS-121 Pilot Mark Kelly works with equipment that will be on the mission. The crew is at Kennedy to take part in ... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, crew members with the STS-125 mission get a close look at some of the equipment associated with their mission to service NASA’s Hubble Space Telescope. At left, Mission Specialist John Grunsfeld looks at the RSU changeout tool latched in place on the Small ORU Protective Enclosure, or SOPE. The STS-125 crew is taking part in a crew equipment interface test, which provides experience handling tools, equipment and hardware they will use on their mission. Space shuttle Atlantis is targeted to launch on the STS-125 mission Oct. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2566

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, crew members with the STS-125 mission get a close look at some of the equipment associated with their mission ... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-122 crew members pause for a photo in front of the Columbus European Laboratory, part of the payload on their mission. From left are Pilot Alan Poindexter, Mission Specialists Hans Schlegel, Rex Walheim and Stan Love, and Commander Steve Frick. Schlegel represents the European Space Agency. The crew is participating in a crew equipment interface test that provides opportunities for hands-on experience with payloads and equipment. The 24th mission to the International Space Station, STS-122 will also include the Multi-Purpose Experiment Support Structure - Non-Deployable (MPESS-ND). Launch of STS-122 on Space Shuttle Discovery is scheduled no earlier than October. Photo credit: NASA/Kim Shiflett KSC-07pd0060

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facili...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-122 crew members pause for a photo in front of the Columbus European Laboratory, part of the payload on their mission. From left are... More

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-123 crew members examine one of the cameras that will be used on the mission. From left are Mission Specialists Garrett Reisman, Richard Linnehan and Michael Foreman. Reisman will join the Expedition 16 crew on the International Space Station, replacing flight engineer Leopold Eyharts. These and other crew members are at NASA's Kennedy Space Center for a crew equipment interface test, a process of familiarization with payloads, hardware and the space shuttle. The STS-123 mission is targeted for launch on space shuttle Endeavour on Feb. 14. It will be the 25th assembly flight of the station. Photo credit: NASA/Kim Shiflett KSC-07pd3564A

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, ...

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-123 crew members examine one of the cameras that will be used on the mission. From left are Mission Specialists Garrett Reisman, Richar... More

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialists Mike Massimino (left) and Michael Good (right) check out the orbiter boom sensor system and the attached camera in space shuttle Atlantis' payload bay. Equipment familiarization is part of the crew equipment interface test, which provides hands-on experience with hardware and equipment for the mission. Atlantis is targeted to launch Oct. 8 on the STS-125 mission to service the Hubble Space Telescope. The mission crew will perform history-making, on-orbit “surgery” on two important science instruments aboard the telescope. After capturing the telescope, two teams of spacewalking astronauts will perform the repairs during five planned spacewalks. Photo credit: NASA/Kim Shiflett KSC-08pd1959

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's K...

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialists Mike Massimino (left) and Michael Good (right) check out the orbiter boom sensor system and... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Orbiter Processing Facility bay 3, STS-121 Pilot Mark Kelly and Mission Specialist Stephanie Wilson are joined by two shuttle technicians as they work with equipment that will be on the mission. The crew is at Kennedy to take part in the crew equipment interface test, which provides hands-on experience with equipment to be used on-orbit. Launch of Space Shuttle Discovery on mission STS-121, the second return-to-flight mission, is scheduled no earlier than May. KSC-06pd0315

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Orbiter Pr...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Orbiter Processing Facility bay 3, STS-121 Pilot Mark Kelly and Mission Specialist Stephanie Wilson are joined by two shuttle technicians as they work... More

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, members of space shuttle Discovery's STS-131 crew participate in training activities during the Crew Equipment Interface Test, or CEIT, for their mission. Here, Mission Specialist Naoko Yamazaki of the Japan Aerospace Exploration Agency becomes familiar with the interior of the multi-purpose logistics module Leonardo. The CEIT provides the crew with hands-on training and observation of shuttle and flight hardware. The seven-member crew will deliver Leonardo, filled with resupply stowage platforms and racks to be transferred to locations around the International Space Station. Three spacewalks will include work to attach a spare ammonia tank assembly to the station's exterior and return a European experiment from outside the station's Columbus module. Discovery's launch is targeted for March 18. For information on the STS-131 mission and crew, visit http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts131/index.html. Photo credit: NASA/Glenn Benson KSC-2010-1154

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NAS...

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, members of space shuttle Discovery's STS-131 crew participate in training activities during the Crew Eq... More

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-135 Mission Specialist Sandy Magnus is inspecting the mid-deck of shuttle Atlantis. The four-member crew is at Kennedy participating in the Crew Equipment Interface Test (CEIT), which gives them an opportunity for hands-on training with the spacecraft and familiarization of the payload they'll deliver to the International Space Station. Atlantis and its payload is being prepared for the STS-135 mission, which will deliver the Raffaello multi-purpose logistics module packed with supplies and spare parts to the station. Atlantis is targeted to launch June 28, and will be the last shuttle flight for the Space Shuttle Program. For more information visit, http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts135/index.html. Photo credit: NASA/Frankie Martin KSC-2011-2916

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NA...

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-135 Mission Specialist Sandy Magnus is inspecting the mid-deck of shuttle Atlantis. The four-membe... More

STS-85 Crew Equipment Interface Test (CEIT KSC-97PC908

STS-85 Crew Equipment Interface Test (CEIT KSC-97PC908

STS-85 Crew Equipment Interface Test (CEIT

KENNEDY SPACE CENTER, FLA. -- Members of the STS-85 flight crew perform a sharp-edge inspection in the payload bay of the Space Shuttle Orbiter Discovery in the space plane's payload bay during Crew Equipment Interface Test (CEIT) activities for that mission. They are (from left, foreground) Mission Specialists Stephen K. Robinson and Robert L. Curbeam Jr. (right). They are accompanied by a United Space Alliance (USA) payload technician. The Manipulator Flight Demonstration (MFD) payload is one of several that will fly on the STS-85 mission. This payload is designed to test the operational capability of the Japanese Experiment Module Remote Manipulator System (JEM RMS) Small Fine Arm (SFA). The arm, which will be a part of the JEM element of the Interntional Space Station, will be operated from the orbiter's aft flight deck during the 11-day mission. Other payloads that will be aboard Discovery on this space flight include the Cryogenic Infrared Spectrometers and Telescopes for the Atmosphere-Shuttle Pallet Satellite-2 (CRISTA-SPAS-2) Technology Applications and Science-1 (TAS-1) and International Extreme Ultraviolet Hitchhhiker (IEH-2) experiments. KSC-97PC907

KENNEDY SPACE CENTER, FLA. -- Members of the STS-85 flight crew perfor...

KENNEDY SPACE CENTER, FLA. -- Members of the STS-85 flight crew perform a sharp-edge inspection in the payload bay of the Space Shuttle Orbiter Discovery in the space plane's payload bay during Crew Equipment I... More

KENNEDY SPACE CENTER, FLA. -- Members of the STS-85 flight crew examine the Manipulator Flight Demonstraton (MFD) payload in the payload bay of the Space Shuttle Orbiter Discovery during Crew Equipment Interface Test (CEIT) activities for that mission. They are (left) Mission Specialists Stephen K. Robinson and Robert L. Curbeam Jr. (right). They are accompanied by a United Space Alliance (USA) payload technician. The MFD is one of several payloads that will fly on the STS-85 mission. This payload is designed to test the operational capability of the Japanese Experiment Module Remote Manipulator System (JEM RMS) Small Fine Arm (SFA), which can be seen atop its Multi-Purpose Experiment Support Structure (MPES) carrier that will serve as a platform in the payload bay for the robotic arm experiment. The arm, which will be a part of the JEM element of the Interntional Space Station, will be operated from the orbiter's aft flight deck during the 11-day mission. Other payloads that will be aboard Discovery on this space flight include the Cryogenic Infrared Spectrometers and Telescopes for the Atmosphere-Shuttle Pallet Satellite-2 (CRISTA-SPAS-2) Technology Applications and Science-1 (TAS-1) and International Extreme Ultraviolet Hitchhhiker (IEH-2) experiments. KSC-97PC906

KENNEDY SPACE CENTER, FLA. -- Members of the STS-85 flight crew examin...

KENNEDY SPACE CENTER, FLA. -- Members of the STS-85 flight crew examine the Manipulator Flight Demonstraton (MFD) payload in the payload bay of the Space Shuttle Orbiter Discovery during Crew Equipment Interfac... More

STS-85 Crew Equipment Interface Test (CEIT KSC-97PC909

STS-85 Crew Equipment Interface Test (CEIT KSC-97PC909

STS-85 Crew Equipment Interface Test (CEIT

KENNEDY SPACE CENTER, FLA. -- STS-89 Mission Specialist Bonnie Dunbar, Ph.D., participates in the Crew Equipment Interface Test (CEIT) in front of the Real-time Radiation Monitoring Device (RRMD) at the SPACEHAB Payload Processing Facility at Port Canaveral in preparation for the mission, slated to be the first Shuttle launch of 1998. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-89 will be the eighth of nine scheduled Mir dockings and will include a double module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Endeavour and the Russian Space Station Mir. The nineday flight of STS-89 also is scheduled to include the transfer of the seventh American to live and work aboard the Russian orbiting outpost. Liftoff of Endeavour and its sevenmember crew is targeted for Jan. 15, 1998, at 1:03 a.m. EDT from Launch Pad 39A KSC-97PC1723

KENNEDY SPACE CENTER, FLA. -- STS-89 Mission Specialist Bonnie Dunbar,...

KENNEDY SPACE CENTER, FLA. -- STS-89 Mission Specialist Bonnie Dunbar, Ph.D., participates in the Crew Equipment Interface Test (CEIT) in front of the Real-time Radiation Monitoring Device (RRMD) at the SPACEHA... More

KENNEDY SPACE CENTER, FLA. -- STS-89 crew members participate with trainers in the Crew Equipment Interface Test (CEIT) at the SPACEHAB Payload Processing Facility at Port Canaveral in preparation for the mission, slated to be the first Shuttle launch of 1998. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. From left to right are Mission Specialists Michael Anderson and Bonnie Dunbar, Ph.D.; Commander Terry Wilcutt; Boeing SPACEHAB Operations Engineer Jim Behling; Boeing SPACEHAB Crew Trainer Laura Keiser; an unidentified staff member (with mustache); Mission Specialist Salizhan Sharipov of the Russian Space Agency; and Pilot Joe Edwards. STS-89 will be the eighth of nine scheduled Mir dockings and will include a double module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Endeavour and the Russian Space Station Mir. The nineday flight of STS-89 also is scheduled to include the transfer of the seventh American to live and work aboard the Russian orbiting outpost. Liftoff of Endeavour and its sevenmember crew is targeted for Jan. 15, 1998, at 1:03 a.m. EST from Launch Pad 39A KSC-97PC1724

KENNEDY SPACE CENTER, FLA. -- STS-89 crew members participate with tra...

KENNEDY SPACE CENTER, FLA. -- STS-89 crew members participate with trainers in the Crew Equipment Interface Test (CEIT) at the SPACEHAB Payload Processing Facility at Port Canaveral in preparation for the missi... More

KENNEDY SPACE CENTER, FLA. -- STS-89 crew members and technicians participate in the Crew Equipment Interface Test (CEIT) in front of the back cap of the SPACEHAB module at the SPACEHAB Payload Processing Facility at Port Canaveral in preparation for the mission, slated to be the first Shuttle launch of 1998. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working onorbit. STS-89 will be the eighth of nine scheduled Mir dockings and will include a double module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Endeavour and the Russian Space Station Mir. The nine-day flight of STS-89 also is scheduled to include the transfer of the seventh American to live and work aboard the Russian orbiting outpost. Liftoff of Endeavour and its seven-member crew is targeted for Jan. 15, 1998, at 1:03 a.m. EDT from Launch Pad 39A KSC-97PC1722

KENNEDY SPACE CENTER, FLA. -- STS-89 crew members and technicians part...

KENNEDY SPACE CENTER, FLA. -- STS-89 crew members and technicians participate in the Crew Equipment Interface Test (CEIT) in front of the back cap of the SPACEHAB module at the SPACEHAB Payload Processing Facil... More

KENNEDY SPACE CENTER, FLA. -- Several STS-89 crew members participate in the Crew Equipment Interface Test (CEIT) inside the SPACEHAB module at the SPACEHAB Payload Processing Facility at Port Canaveral in preparation for the mission, slated to be the first Shuttle launch of 1998. From left to right are Mission Specialists Bonnie Dunbar, Ph.D., and Salizhan Sharipov of the Russian Space Agency, and Pilot Joe Edwards. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-89 will be the eighth of nine scheduled Mir dockings and will include a double module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Endeavour and the Russian Space Station Mir. The nine-day flight of STS-89 also is scheduled to include the transfer of the seventh American to live and work aboard the Russian orbiting outpost. Liftoff of Endeavour and its seven-member crew is targeted for Jan. 15, 1998, at 1:03 a.m. EST from Launch Pad 39A KSC-97PC1721

KENNEDY SPACE CENTER, FLA. -- Several STS-89 crew members participate ...

KENNEDY SPACE CENTER, FLA. -- Several STS-89 crew members participate in the Crew Equipment Interface Test (CEIT) inside the SPACEHAB module at the SPACEHAB Payload Processing Facility at Port Canaveral in prep... More

STS-88 crew members participate in the Crew Equipment Interface Test (CEIT) in KSC's Space Station Processing Facility. Working on a high voltage box for electrical connections for the International Space Station (ISS) are, left to right, a technician, Pilot Rick Sturckow, Mission Specialist Jerry Ross (with glasses), and Commander Bob Cabana (back to camera). The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-88, the first ISS assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1787

STS-88 crew members participate in the Crew Equipment Interface Test (...

STS-88 crew members participate in the Crew Equipment Interface Test (CEIT) in KSC's Space Station Processing Facility. Working on a high voltage box for electrical connections for the International Space Stati... More

Mission Specialist Jerry Ross participates in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. Here, Ross is inspecting electrical connections that will be used in assembly of the International Space Station (ISS). STS-88, the first ISS assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1786

Mission Specialist Jerry Ross participates in the Crew Equipment Inter...

Mission Specialist Jerry Ross participates in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get a hands-on look at t... More

KENNEDY SPACE CENTER, FLA. -- Commander Bob Cabana participates in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. Here, Cabana sits inside the Pressurized Mating Adapter-1 (PMA-1) for a close-up look at some of the connecting ducts and wires. Node 1 of the International Space Station (ISS) is behind him. STS-88, the first ISS assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1791

KENNEDY SPACE CENTER, FLA. -- Commander Bob Cabana participates in the...

KENNEDY SPACE CENTER, FLA. -- Commander Bob Cabana participates in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get... More

STS-88 crew members and Boeing Manufacturing Engineer Harry Feinberg enjoy a moment inside Node 1 of the International Space Station (ISS) during the mission's Crew Equipment Interface Test (CEIT) in KSC's Space Station Processing Facility. Discussing the mission are, from left to right, Feinberg, Commander Bob Cabana, Mission Specialist Nancy Currie, and Pilot Rick Sturckow. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-88, the first ISS assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1790

STS-88 crew members and Boeing Manufacturing Engineer Harry Feinberg e...

STS-88 crew members and Boeing Manufacturing Engineer Harry Feinberg enjoy a moment inside Node 1 of the International Space Station (ISS) during the mission's Crew Equipment Interface Test (CEIT) in KSC's Spac... More

Commander Bob Cabana participates in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. Here, Cabana inspects one of the six hatches on Node 1 of the International Space Station (ISS). STS-88, the first ISS assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1788

Commander Bob Cabana participates in the Crew Equipment Interface Test...

Commander Bob Cabana participates in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get a hands-on look at the payloa... More

Pilot Rick Sturckow and Mission Specialist Jerry Ross, both members of the STS-88 crew, participate with technicians in the Crew Equipment Interface Test for that mission in KSC's Space Station Processing Facility. STS-88, the first International Space Station assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1784

Pilot Rick Sturckow and Mission Specialist Jerry Ross, both members of...

Pilot Rick Sturckow and Mission Specialist Jerry Ross, both members of the STS-88 crew, participate with technicians in the Crew Equipment Interface Test for that mission in KSC's Space Station Processing Facil... More

Pilot Rick Sturckow, left of center, and Mission Specialist Jerry Ross, right of center, participate in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. Here, the crew is inspecting electrical connections that will be used in assembly of the International Space Station (ISS). STS-88, the first ISS assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1792

Pilot Rick Sturckow, left of center, and Mission Specialist Jerry Ross...

Pilot Rick Sturckow, left of center, and Mission Specialist Jerry Ross, right of center, participate in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT g... More

STS-88 crew members participate in the Crew Equipment Interface Test (CEIT) for that mission in KSC's Space Station Processing Facility. Discussing the mission are, from left to right, Pilot Rick Sturckow, Mission Specialists Jerry Ross and Nancy Currie, and Commander Bob Cabana. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-88, the first ISS assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1793

STS-88 crew members participate in the Crew Equipment Interface Test (...

STS-88 crew members participate in the Crew Equipment Interface Test (CEIT) for that mission in KSC's Space Station Processing Facility. Discussing the mission are, from left to right, Pilot Rick Sturckow, Miss... More

Mission Specialist Jerry Ross participates in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-88, the first International Space Station assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1785

Mission Specialist Jerry Ross participates in the Crew Equipment Inter...

Mission Specialist Jerry Ross participates in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get a hands-on look at t... More

Mission Specialist Nancy Currie and Commander Bob Cabana participate in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. Here, Currie and Cabana inspect one of the six hatches on Node 1 of the International Space Station (ISS). STS-88, the first ISS assembly flight, is targeted for launch in July 1998 aboard Space Shuttle Endeavour KSC-97PC1789

Mission Specialist Nancy Currie and Commander Bob Cabana participate i...

Mission Specialist Nancy Currie and Commander Bob Cabana participate in the Crew Equipment Interface Test (CEIT) for STS-88 in KSC's Space Station Processing Facility. The CEIT gives astronauts an opportunity t... More

STS-90 Mission Specialist Dafydd "Dave" Rhys Williams, M.D., with the Canadian Space Agency, and back-up Payload Specialist Chiaki Mukai, M.D., Ph.D., with the National Space Development Agency of Japan, examine items to be used during the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's (KSC's) Operations and Checkout Building, where the Neurolab payload is undergoing processing. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-90 is scheduled to launch aboard the Shuttle Columbia from KSC on April 2. Investigations during the Neurolab mission will focus on the effects of microgravity on the nervous system. Specifically, experiments will study the adaptation of the vestibular system, the central nervous system, and the pathways that control the ability to sense location in the absence of gravity, as well as the effect of microgravity on a developing nervous system KSC-98pc146

STS-90 Mission Specialist Dafydd "Dave" Rhys Williams, M.D., with the ...

STS-90 Mission Specialist Dafydd "Dave" Rhys Williams, M.D., with the Canadian Space Agency, and back-up Payload Specialist Chiaki Mukai, M.D., Ph.D., with the National Space Development Agency of Japan, examin... More

STS-90 crew members study manuals and drawings for the mission's Neurolab payload during the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's (KSC's) Operations and Checkout Building, where the payload is undergoing processing. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-90 is scheduled to launch aboard the Shuttle Columbia from KSC on April 2. Investigations during the Neurolab mission will focus on the effects of microgravity on the nervous system. Specifically, experiments will study the adaptation of the vestibular system, the central nervous system, and the pathways that control the ability to sense location in the absence of gravity, as well as the effect of microgravity on a developing nervous system KSC-98pc149

STS-90 crew members study manuals and drawings for the mission's Neuro...

STS-90 crew members study manuals and drawings for the mission's Neurolab payload during the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's (KSC's) Operations and Checkout Building, where the pa... More

STS-90 crew members check out the inside of the module for the mission's Neurolab payload during the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's (KSC's) Operations and Checkout Building, where the payload is undergoing processing. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-90 is scheduled to launch aboard the Shuttle Columbia from KSC on April 2. Investigations during the Neurolab mission will focus on the effects of microgravity on the nervous system. Specifically, experiments will study the adaptation of the vestibular system, the central nervous system, and the pathways that control the ability to sense location in the absence of gravity, as well as the effect of microgravity on a developing nervous system KSC-98pc148

STS-90 crew members check out the inside of the module for the mission...

STS-90 crew members check out the inside of the module for the mission's Neurolab payload during the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's (KSC's) Operations and Checkout Building, wher... More

STS-90 Payload Specialists James Pawelczyk, Ph.D. (at left), and Jay Buckey Jr., M.D., examine items to be used during the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's (KSC's) Operations and Checkout Building, where the Neurolab payload is undergoing processing. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-90 is scheduled to launch aboard the Shuttle Columbia from KSC on April 2. Investigations during the Neurolab mission will focus on the effects of microgravity on the nervous system. Specifically, experiments will study the adaptation of the vestibular system, the central nervous system, and the pathways that control the ability to sense location in the absence of gravity, as well as the effect of microgravity on a developing nervous system KSC-98pc145

STS-90 Payload Specialists James Pawelczyk, Ph.D. (at left), and Jay B...

STS-90 Payload Specialists James Pawelczyk, Ph.D. (at left), and Jay Buckey Jr., M.D., examine items to be used during the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's (KSC's) Operations and C... More

STS-90 Payload Specialist James Pawelczyk, Ph.D., holds up a panel as one of the items used during the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's (KSC's) Operations and Checkout Building, where the Neurolab payload is undergoing processing. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-90 is scheduled to launch aboard the Shuttle Columbia from KSC on April 2. Investigations during the Neurolab mission will focus on the effects of microgravity on the nervous system. Specifically, experiments will study the adaptation of the vestibular system, the central nervous system, and the pathways that control the ability to sense location in the absence of gravity, as well as the effect of microgravity on a developing nervous system KSC-98pc147

STS-90 Payload Specialist James Pawelczyk, Ph.D., holds up a panel as ...

STS-90 Payload Specialist James Pawelczyk, Ph.D., holds up a panel as one of the items used during the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's (KSC's) Operations and Checkout Building, wh... More

Members of the STS-90 crew participate in the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's Orbiter Processing Facility Bay 3. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. Investigations during the STS-90 Neurolab mission will focus on the effects of microgravity on the nervous system. Specifically, experiments will study the adaptation of the vestibular system, the central nervous system, and the pathways that control the ability to sense location in the absence of gravity, as well as the effect of microgravity on a developing nervous system. The crew of STS-90, slated for launch in April, will include Commander Richard Searfoss, Pilot Scott Altman, Mission Specialists Richard Linnehan, Dafydd (Dave) Williams, M.D., and Kathryn (Kay) Hire, and Payload Specialists Jay Buckey, M.D., and James Pawelczyk, Ph.D KSC-98pc315

Members of the STS-90 crew participate in the Crew Equipment Interface...

Members of the STS-90 crew participate in the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's Orbiter Processing Facility Bay 3. The CEIT gives astronauts an opportunity to get a hands-on look at... More

Members of the STS-90 crew participate in the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's Orbiter Processing Facility Bay 3. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. Investigations during the STS-90 Neurolab mission will focus on the effects of microgravity on the nervous system. Specifically, experiments will study the adaptation of the vestibular system, the central nervous system, and the pathways that control the ability to sense location in the absence of gravity, as well as the effect of microgravity on a developing nervous system. The crew of STS-90, slated for launch in April, are, left to right, Pilot Scott Altman; Payload Specialist James Pawelczyk, Ph.D.; Commander Richard Searfoss; Mission Specialists Dafydd (Dave) Williams, M.D., and Kathryn (Kay) Hire; Payload Specialist Jay Buckey, M.D.; and Mission Specialist Richard Linnehan KSC-98pc316

Members of the STS-90 crew participate in the Crew Equipment Interface...

Members of the STS-90 crew participate in the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's Orbiter Processing Facility Bay 3. The CEIT gives astronauts an opportunity to get a hands-on look at... More

STS-90 Mission Specialist Kathryn (Kay) Hire enjoys the crawl between Columbia and the white room that allows access to the orbiter. The crew of STS-90 recently participated in the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's Orbiter Processing Facility Bay 3. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. Investigations during the STS-90 Neurolab mission will focus on the effects of microgravity on the nervous system. Specifically, experiments will study the adaptation of the vestibular system, the central nervous system, and the pathways that control the ability to sense location in the absence of gravity, as well as the effect of microgravity on a developing nervous system. STS-90, which will be Hire's first Shuttle flight, is scheduled for launch on April 16 at 2:19 p.m. EDT KSC-98pc339

STS-90 Mission Specialist Kathryn (Kay) Hire enjoys the crawl between ...

STS-90 Mission Specialist Kathryn (Kay) Hire enjoys the crawl between Columbia and the white room that allows access to the orbiter. The crew of STS-90 recently participated in the Crew Equipment Interface Test... More

Stacie Greene, an extravehicular activity trainer from Johnson Space Center, discusses the STS-90 Neurolab mission with Mission Specialist Richard Linnehan overlooking Columbia's payload bay. The crew of STS-90 participated in the Crew Equipment Interface Test (CEIT) in Kennedy Space Center's Orbiter Processing Facility Bay 3. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. Investigations during the STS-90 Neurolab mission will focus on the effects of microgravity on the nervous system. Specifically, experiments will study the adaptation of the vestibular system, the central nervous system, and the pathways that control the ability to sense location in the absence of gravity, as well as the effect of microgravity on a developing nervous system. STS-90 is scheduled for launch on April 16 at 2:19 p.m. EDT KSC-98pc338

Stacie Greene, an extravehicular activity trainer from Johnson Space C...

Stacie Greene, an extravehicular activity trainer from Johnson Space Center, discusses the STS-90 Neurolab mission with Mission Specialist Richard Linnehan overlooking Columbia's payload bay. The crew of STS-90... More

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-91 will be the ninth and final scheduled Mir docking and will include a single module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Discovery and the Russian Space Station Mir. The nearly 10-day flight of STS-91 also is scheduled to include the return of the last astronaut to live and work aboard the Russian orbiting outpost, Mission Specialist Andy Thomas, Ph.D. Liftoff of Discovery and its six-member crew is targeted for May 28, 1998, at 8:05 p.m. EDT from Launch Pad 39A. Seen here are STS-91 Mission Specialist Valery Ryumin with the Russian Space Agency and his Russian Interpreter Olga Belozerova KSC-98pc424

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew ...

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The ... More

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-91 will be the ninth and final scheduled Mir docking and will include a single module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Discovery and the Russian Space Station Mir. The nearly 10-day flight of STS-91 also is scheduled to include the return of the last astronaut to live and work aboard the Russian orbiting outpost, Mission Specialist Andy Thomas, Ph.D. Liftoff of Discovery and its six-member crew is targeted for May 28, 1998, at 8:05 p.m. EDT from Launch Pad 39A. From left to right are STS-91 Pilot Dominic Gorie, STS-91 Mission Specialist Franklin Chang-Diaz, Ph.D., STS-91 Commander Charles Precourt, Boeing SPACEHAB Program Senior Engineer Shawn Hicks, Russian Interpreter Olga Belozerova, and STS-91 Mission Specialist Valery Ryumin with the Russian Space Agency KSC-98pc429

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew ...

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The ... More

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-91 will be the ninth and final scheduled Mir docking and will include a single module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Discovery and the Russian Space Station Mir. The nearly 10-day flight of STS-91 also is scheduled to include the return of the last astronaut to live and work aboard the Russian orbiting outpost, Mission Specialist Andy Thomas, Ph.D. Liftoff of Discovery and its six-member crew is targeted for May 28, 1998, at 8:05 p.m. EDT from Launch Pad 39A. Sitting in front of SPACEHAB is STS-91 Commander Charles Precourt listening to instruction by Chris Jaskolka, Boeing SPACEHAB Program senior engineer, as Lynn Ashby, Boeing SPACEHAB Program principal engineer, looks on KSC-98pc422

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew ...

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The ... More

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-91 will be the ninth and final scheduled Mir docking and will include a single module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Discovery and the Russian Space Station Mir. The nearly 10-day flight of STS-91 also is scheduled to include the return of the last astronaut to live and work aboard the Russian orbiting outpost, Mission Specialist Andy Thomas, Ph.D. Liftoff of Discovery and its six-member crew is targeted for May 28, 1998, at 8:05 p.m. EDT from Launch Pad 39A. From left to right are STS-91 Mission Specialist Janet Kavandi, Ph.D., STS091 Pilot Dominic Gorie, and STS-91 Commander Charles Precourt, and Boeing SPACEHAB Program Senior Engineer Shawn Hicks KSC-98pc428

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew ...

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The ... More

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-91 will be the ninth and final scheduled Mir docking and will include a single module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Discovery and the Russian Space Station Mir. The nearly 10-day flight of STS-91 also is scheduled to include the return of the last astronaut to live and work aboard the Russian orbiting outpost, Mission Specialist Andy Thomas, Ph.D. Liftoff of Discovery and its six-member crew is targeted for May 28, 1998, at 8:05 p.m. EDT from Launch Pad 39A. At far left is Boeing SPACEHAB Program Senior Engineer Ellen Styles, and around the table are, left to right, STS-91 Pilot Dominic Gorie, STS-91 Mission Specialist Franklin Chang-Diaz, Ph.D., Boeing SPACEHAB Program Senior Engineer Chris Jazkolka, STS-91 Commander Charles Precourt, and STS-91 Mission Specialist Valery Ryumin with the Russian Space Agency KSC-98pc426

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew ...

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The ... More

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-91 will be the ninth and final scheduled Mir docking and will include a single module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Discovery and the Russian Space Station Mir. The nearly 10-day flight of STS-91 also is scheduled to include the return of the last astronaut to live and work aboard the Russian orbiting outpost, Mission Specialist Andy Thomas, Ph.D. Liftoff of Discovery and its six-member crew is targeted for May 28, 1998, at 8:05 p.m. EDT from Launch Pad 39A. From left to right are Boeing SPACEHAB Payload Operations Senior Engineer Jim Behling, STS-91 Pilot Dominic Gorie, Boeing SPACEHAB Program Principal Engineer Lynn Ashby, STS-91 Commander Charles Precourt, and STS-91 Mission Specialist Valery Ryumin with the Russian Space Agency KSC-98pc425

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew ...

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The ... More

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-91 will be the ninth and final scheduled Mir docking and will include a single module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Discovery and the Russian Space Station Mir. The nearly 10-day flight of STS-91 also is scheduled to include the return of the last astronaut to live and work aboard the Russian orbiting outpost, Mission Specialist Andy Thomas, Ph.D. Liftoff of Discovery and its six-member crew is targeted for May 28, 1998, at 8:05 p.m. EDT from Launch Pad 39A. From left to right are STS-91 Pilot Dominic Gorie, Russian Interpreter Olga Belozerova, STS-91 Commander Charles Precourt, and STS-91 Mission Specialist Valery Ryumin with the Russian Space Agency KSC-98pc423

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew ...

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The ... More

The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-91 will be the ninth and final scheduled Mir docking and will include a single module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Discovery and the Russian Space Station Mir. The nearly 10-day flight of STS-91 also is scheduled to include the return of the last astronaut to live and work aboard the Russian orbiting outpost, Mission Specialist Andy Thomas, Ph.D. Liftoff of Discovery and its six-member crew is targeted for May 28, 1998, at 8:05 p.m. EDT from Launch Pad 39A. From left to right are STS-91 Pilot Dominic Gorie, STS-91 Commander Charles Precourt, Boeing SPACEHAB Payload Operations Senior Engineer Jim Behling, Boeing SPACEHAB Program Senior Engineer Shawn Hicks, Boeing SPACEHAB Program Specialist in Engineering Ed Saenger, STS-91 Mission Specialist Valery Ryumin with the Russian Space Agency, Boeing SPACEHAB Program Manager in Engineering Brad Reid, and Russian Interpreter Olga Belozerova KSC-98pc421

The STS-91 crew participate in the Crew Equipment Interface Test (CEIT...

The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an oppor... More

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The CEIT gives astronauts an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. STS-91 will be the ninth and final scheduled Mir docking and will include a single module of SPACEHAB, used mainly as a large pressurized cargo container for science, logistical equipment and supplies to be exchanged between the orbiter Discovery and the Russian Space Station Mir. The nearly 10-day flight of STS-91 also is scheduled to include the return of the last astronaut to live and work aboard the Russian orbiting outpost, Mission Specialist Andy Thomas, Ph.D. Liftoff of Discovery and its six-member crew is targeted for May 28, 1998, at 8:05 p.m. EDT from Launch Pad 39A. From left to right are Mission Specialist Janet Kavandi, Ph.D., Pilot Dominic Gorie, Mission Specialist Franklin Chang-Diaz, Ph.D., Commander Charles Precourt, Russian Interpreter Olga Belozerova, and Mission Specialist Valery Ryumin with the Russian Space Agency KSC-98pc427

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew ...

KENNEDY SPACE CENTER, FLA. -- The STS-91 crew participate in the Crew Equipment Interface Test (CEIT) for their upcoming Space Shuttle mission at the SPACEHAB Payload Processing Facility in Cape Canaveral. The ... More

STS-91 Mission Specialist Janet Kavandi, Ph.D., participates in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. She is inspecting a foot restraint for an external vehicular activity (EVA) spacewalk. During CEIT, the crew have an opportunity to get a hands-on look at the payloads with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc467

STS-91 Mission Specialist Janet Kavandi, Ph.D., participates in the Cr...

STS-91 Mission Specialist Janet Kavandi, Ph.D., participates in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. She is inspecting a foot restraint for an external vehicul... More

STS-91 Commander Charles Precourt inspects the windows of the cockpit from inside of the orbiter Discovery during the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. During CEIT, the crew have an opportunity to get a hands-on look at the payloads with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc463

STS-91 Commander Charles Precourt inspects the windows of the cockpit ...

STS-91 Commander Charles Precourt inspects the windows of the cockpit from inside of the orbiter Discovery during the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. During C... More

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. From left to right are STS-91 Mission Specialists Franklin Chang-Diaz, Ph.D., and Janet Kavandi, Ph.D., along with Kieth Johnson, an EVA trainer/flight controller from Johnson Space Center. During CEIT, the crew have an opportunity to get a hands-on look at the payloads with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc471

STS-91 crew members participate in the Crew Equipment Interface Test, ...

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. From left to right are STS-91 Mission Specialists Franklin Chang-Diaz, Ph.D., and Janet... More

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Laying down inspecting a foot restraint for an extravehicular activity (EVA) spacewalk is STS-91 Mission Specialist Franklin Chang-Diaz, Ph.D. Looking over his shoulder is Kieth Johnson, an EVA trainer and flight controller from Johnson Space Center. STS-91 Mission Specialist Janet Kavandi, Ph.D., stands next to Johnson. During CEIT, the crew have an opportunity to get a hands-on look at the payloads with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc466

STS-91 crew members participate in the Crew Equipment Interface Test, ...

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Laying down inspecting a foot restraint for an extravehicular activity (EVA) spacewalk ... More

STS-91 Commander Charles Precourt peers through an airlock like the one that will be aboard the orbiter Discovery when it docks with the Russian Space Station Mir on the ninth and final scheduled Mir docking in late May/early June. Precourt is in KSC's Orbiter Processing Facility Bay 2 for the STS-91 Crew Equipment Interface Test, or CEIT, during which the crew have an opportunity to get a hands-on look at the payloads with which they will be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc460

STS-91 Commander Charles Precourt peers through an airlock like the on...

STS-91 Commander Charles Precourt peers through an airlock like the one that will be aboard the orbiter Discovery when it docks with the Russian Space Station Mir on the ninth and final scheduled Mir docking in... More

The STS-91 crew participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Left to right are STS-91 Mission Specialist Janet Kavandi, Ph.D.; KSC's Vehicle Integration Test Team member Danny Wittington; and STS-91 Mission Specialist Franklin Chang-Diaz, Ph.D. During CEIT, the crew have an opportunity to get a hands-on look at the payloads with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc464

The STS-91 crew participate in the Crew Equipment Interface Test, or C...

The STS-91 crew participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Left to right are STS-91 Mission Specialist Janet Kavandi, Ph.D.; KSC's Vehicle Integration... More

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Here, Mission Specialist Janet Kavandi, Ph.D., inspects a foot restraint for an external vehicular activity (EVA) spacewalk. During CEIT, the crew have an opportunity to get a hands-on look at the payloads and equipment with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc469

STS-91 crew members participate in the Crew Equipment Interface Test, ...

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Here, Mission Specialist Janet Kavandi, Ph.D., inspects a foot restraint for an externa... More

STS-91 Mission Specialists Franklin Chang-Diaz, Ph.D., and Janet Kavandi, Ph.D., participate in the Crew Equipment Interface Test, or CEIT, inside an airlock in KSC's Orbiter Processing Facility Bay 2. During CEIT, the crew have an opportunity to get a hands-on look at the payloads with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc461

STS-91 Mission Specialists Franklin Chang-Diaz, Ph.D., and Janet Kavan...

STS-91 Mission Specialists Franklin Chang-Diaz, Ph.D., and Janet Kavandi, Ph.D., participate in the Crew Equipment Interface Test, or CEIT, inside an airlock in KSC's Orbiter Processing Facility Bay 2. During C... More

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Here, Mission Specialist Janet Kavandi, Ph.D., inspects a foot restraint for an external vehicular activity (EVA) spacewalk. During CEIT, the crew have an opportunity to get a hands-on look at the payloads and equipment with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc468

STS-91 crew members participate in the Crew Equipment Interface Test, ...

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Here, Mission Specialist Janet Kavandi, Ph.D., inspects a foot restraint for an externa... More

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Here, Mission Specialist Janet Kavandi, Ph.D., inspects a foot restraint for an external vehicular activity (EVA) spacewalk. During CEIT, the crew have an opportunity to get a hands-on look at the payloads and equipment with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc470

STS-91 crew members participate in the Crew Equipment Interface Test, ...

STS-91 crew members participate in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. Here, Mission Specialist Janet Kavandi, Ph.D., inspects a foot restraint for an externa... More

STS-91 Mission Specialist Franklin Chang-Diaz, Ph.D., participates in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. He is inspecting a foot restraint for an external vehicular activity (EVA) spacewalk. During CEIT, the crew have an opportunity to get a hands-on look at the payloads and equipment with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc465

STS-91 Mission Specialist Franklin Chang-Diaz, Ph.D., participates in ...

STS-91 Mission Specialist Franklin Chang-Diaz, Ph.D., participates in the Crew Equipment Interface Test, or CEIT, in KSC's Orbiter Processing Facility Bay 2. He is inspecting a foot restraint for an external ve... More

STS-91 Mission Specialist Valery Ryumin with the Russian Space Agency, Pilot Dominic Gorie, Commander Charles Precourt, and Adam Flagan, a crew equipment trainer from Johnson Space Center, inspect a flight pack as part of Crew Equipment Interface Test, or CEIT, activities in KSC's Orbiter Processing Facility Bay 2. During CEIT, the crew have an opportunity to get a hands-on look at the payloads with which they'll be working on-orbit. The STS-91 crew are scheduled to launch aboard the Shuttle Discovery for the ninth and final docking with the Russian Space Station Mir from KSC's Launch Pad 39A on May 28 at 8:05 EDT KSC-98pc462

STS-91 Mission Specialist Valery Ryumin with the Russian Space Agency,...

STS-91 Mission Specialist Valery Ryumin with the Russian Space Agency, Pilot Dominic Gorie, Commander Charles Precourt, and Adam Flagan, a crew equipment trainer from Johnson Space Center, inspect a flight pack... More

STS-88 crew members inspect the orbital docking mechanism in the payload bay of Orbiter Endeavor during the Crew Equipment Interface Test (CEIT), held in the Orbiter Processing Facility Bay 1 at KSC. The tunnel and airlock are below it. The CEIT gives astronauts an opportunity for a hands-on look at the payloads on which they will be working on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Scheduled to lift off from KSC on Dec. 3, 1998, the seven-day mission will be highlighted by the mating of the U.S.-built Unity connecting module to the Zarya control module, which will already be in orbit, and two space walks to connect power and data transmission cables between the two modules KSC-98pc829

STS-88 crew members inspect the orbital docking mechanism in the paylo...

STS-88 crew members inspect the orbital docking mechanism in the payload bay of Orbiter Endeavor during the Crew Equipment Interface Test (CEIT), held in the Orbiter Processing Facility Bay 1 at KSC. The tunnel... More

STS-88 crew members inspect the orbital docking mechanism in the payload bay of Orbiter Endeavour during the Crew Equipment Interface Test (CEIT), held in the Orbiter Processing Facility Bay 1 at KSC. The CEIT gives astronauts an opportunity for a hands-on look at the payloads on which they will be working on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Scheduled to lift off on Dec. 3, 1998, the seven-day mission will be highlighted by the mating of the U.S.-built Unity connecting module to the Zarya control module, which will already be in orbit, and two space walks to connect power and data transmission cables between the two modules KSC-98pc830

STS-88 crew members inspect the orbital docking mechanism in the paylo...

STS-88 crew members inspect the orbital docking mechanism in the payload bay of Orbiter Endeavour during the Crew Equipment Interface Test (CEIT), held in the Orbiter Processing Facility Bay 1 at KSC. The CEIT ... More

KENNEDY SPACE CENTER, FLA. -- Members of the STS-88 crew watch as Mission Specialist Jerry L. Ross inspects the Unity connecting module, part of the International Space Station, in the Space Station Processing Facility at KSC. During the mission, the Unity connecting module will be mated to the Zarya control module, which will already be in orbit. The STS-88 crew is participating in a Crew Equipment Interface Test, which gives astronauts an opportunity for a hands-on look at the payloads on which they will be working while on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Launch is scheduled for December 1998 KSC-98pc844

KENNEDY SPACE CENTER, FLA. -- Members of the STS-88 crew watch as Miss...

KENNEDY SPACE CENTER, FLA. -- Members of the STS-88 crew watch as Mission Specialist Jerry L. Ross inspects the Unity connecting module, part of the International Space Station, in the Space Station Processing ... More

KENNEDY SPACE CENTER, FLA. -- STS-88 crew members and technicians watch as Pilot Rick W. Sturckow inspects equipment on the Unity connecting module, part of the International Space Station, in the Space Station Processing Facility at KSC. During the mission, the Unity connecting module will be mated to the Zarya control module, which will already be in orbit. The STS-88 crew is participating in a Crew Equipment Interface Test, which gives astronauts an opportunity for a hands-on look at the payloads on which they will be working while on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Launch is scheduled for December 1998 KSC-98pc847

KENNEDY SPACE CENTER, FLA. -- STS-88 crew members and technicians watc...

KENNEDY SPACE CENTER, FLA. -- STS-88 crew members and technicians watch as Pilot Rick W. Sturckow inspects equipment on the Unity connecting module, part of the International Space Station, in the Space Station... More

KENNEDY SPACE CENTER, FLA. -- As part of the Crew Equipment Interface Test (CEIT), Boeing Structural Engineer Karry Switzer (second from left) shows part of the Unity connecting module to STS-88 crew members Mission Specialist Jerry L. Ross and Pilot Rick W. Sturckow in the Space Station Processing Facility at KSC. The Unity connecting module, part of the International Space Station, will be mated to the Zarya control module, which will already be in orbit. The CEIT gives astronauts an opportunity for a hands-on look at the payloads on which they will be working while on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Launch is scheduled for December 1998 KSC-98pc846

KENNEDY SPACE CENTER, FLA. -- As part of the Crew Equipment Interface ...

KENNEDY SPACE CENTER, FLA. -- As part of the Crew Equipment Interface Test (CEIT), Boeing Structural Engineer Karry Switzer (second from left) shows part of the Unity connecting module to STS-88 crew members Mi... More

KENNEDY SPACE CENTER, FLA. -- STS-88 Mission Specialist Nancy J. Currie works on a foot restraint attached to the Unity connecting module, part of the International Space Station, in the Space Station Processing Facility at KSC. During the mission, the Unity connecting module will be mated to the Zarya control module, which will already be in orbit. The STS-88 crew is participating in a Crew Equipment Interface Test, which gives astronauts an opportunity for a hands-on look at the payloads on which they will be working while on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Launch is scheduled for December 1998 KSC-98pc849

KENNEDY SPACE CENTER, FLA. -- STS-88 Mission Specialist Nancy J. Curri...

KENNEDY SPACE CENTER, FLA. -- STS-88 Mission Specialist Nancy J. Currie works on a foot restraint attached to the Unity connecting module, part of the International Space Station, in the Space Station Processin... More

KENNEDY SPACE CENTER, FLA. -- STS-88 Mission Specialist Jerry L. Ross removes a cover from the Unity connecting module, part of the International Space Station, while other crew members and technicians watch. The Unity will be mated to the Zarya control module, which will already be in orbit. The STS-88 crew is participating in the Crew Equipment Interface Test (CEIT) held in the Space Station Processing Facility. The CEIT gives astronauts an opportunity for a hands-on look at the payloads on which they will be working while on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Launch is scheduled for December 1998 KSC-98pc843

KENNEDY SPACE CENTER, FLA. -- STS-88 Mission Specialist Jerry L. Ross ...

KENNEDY SPACE CENTER, FLA. -- STS-88 Mission Specialist Jerry L. Ross removes a cover from the Unity connecting module, part of the International Space Station, while other crew members and technicians watch. T... More

KENNEDY SPACE CENTER, FLA. -- STS-88 Mission Specialist Jerry L. Ross (center) removes the cover from the Unity connecting module, part of the International Space Station, so that he and Boeing Technician Doug Adams (left) can inspect it. Training Technician Glenda Laws (right) watches the procedure. The STS-88 crew is participating in the Crew Equipment Interface Test (CEIT) held in the Space Station Processing Facility. The CEIT gives astronauts an opportunity for a hands-on look at the payloads on which they will be working while on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Launch is scheduled for December 1998 KSC-98pc842

KENNEDY SPACE CENTER, FLA. -- STS-88 Mission Specialist Jerry L. Ross ...

KENNEDY SPACE CENTER, FLA. -- STS-88 Mission Specialist Jerry L. Ross (center) removes the cover from the Unity connecting module, part of the International Space Station, so that he and Boeing Technician Doug ... More

Astronauts Scott J. Kelly and Piers J. Sellers join STS-88 Mission Specialist Jerry L. Ross and a Boeing technician in inspecting the Unity connecting module, part of the International Space Station, at the Space Station Processing Facility at KSC. The Unity connecting module will be mated to the Zarya control module, which will already be in orbit. The STS-88 crew is participating in a Crew Equipment Interface Test (CEIT), which gives astronauts an opportunity for a hands-on look at the payloads on which they will be working while on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Launch is scheduled for December 1998 KSC-98pc841

Astronauts Scott J. Kelly and Piers J. Sellers join STS-88 Mission Spe...

Astronauts Scott J. Kelly and Piers J. Sellers join STS-88 Mission Specialist Jerry L. Ross and a Boeing technician in inspecting the Unity connecting module, part of the International Space Station, at the Spa... More

KENNEDY SPACE CENTER, FLA. -- STS-88 crew members and technicians get under the Unity connecting module to examine it during a Crew Equipment Interface Test (CEIT) in the Space Station Processing Facility at KSC. The Unity connecting module is part of the International Space Station, and during the mission, will be mated to the Zarya control module, which will already be in orbit. The CEIT gives astronauts an opportunity for a hands-on look at the payloads on which they will be working while on orbit. STS-88 will be the first Space Shuttle launch for the International Space Station. Launch is scheduled for December 1998 KSC-98pc848

KENNEDY SPACE CENTER, FLA. -- STS-88 crew members and technicians get ...

KENNEDY SPACE CENTER, FLA. -- STS-88 crew members and technicians get under the Unity connecting module to examine it during a Crew Equipment Interface Test (CEIT) in the Space Station Processing Facility at KS... More

Previous

of 11

Next