nasa

kennedy space center

sts

space shuttle

cape canaveral

system

us national archives

astronauts

replacement

1,875 media by topic ∙ page 1 of 19
Medal Commemorating the Replacement of the Statue of Louis XIV in the Place des Victoires

Medal Commemorating the Replacement of the Statue of Louis XIV in the ...

Medalist: Raymond Gayrard (French, Rodez 1777–1858 Paris) Public domain photograph of French art object, free to use, no copyright restrictions image - Picryl description Public domain photograph of French ar... More

Replacement of the injured Horse of the Prince of Orange, later King William II, during the Battle at Boutersem, 12 August 1831

Replacement of the injured Horse of the Prince of Orange, later King W...

Picryl description: Public domain artwork of horse, equestrian horse riding, free to use, no copyright restrictions image.

John B. Henderson to Abraham Lincoln, Monday, March 23, 1863 (Telegram requesting replacement for General Sumner)

John B. Henderson to Abraham Lincoln, Monday, March 23, 1863 (Telegra...

Salmon P. Chase to Abraham Lincoln, Tuesday, June 28, 1864 (Replacement for John J. Cisco)

Salmon P. Chase to Abraham Lincoln, Tuesday, June 28, 1864 (Replaceme...

John Cochrane to Abraham Lincoln, Tuesday, January 12, 1864 (Recommends replacement for Hiram Barney)

John Cochrane to Abraham Lincoln, Tuesday, January 12, 1864 (Recommen...

Replacement Calves at Parmelee, South Dakota - Ready for Distribution - Bureau of Indian Affairs

Replacement Calves at Parmelee, South Dakota - Ready for Distribution ...

Public domain photograph related to native Americans, Reservations, free to use, no copyright restrictions image - Picryl description

Replacement Calves Headed to Rosebud - Bureau of Indian Affairs

Replacement Calves Headed to Rosebud - Bureau of Indian Affairs

Public domain photograph related to native Americans, Reservations, free to use, no copyright restrictions image - Picryl description

New York Board of Trade says 'nonsense' to charges on capital strike. Washington, D.C., June 3. M.L. Seidman, Chairman of the New York Board of Trade Tax Committee suggested a 10 point tax program to the House Ways and Means Committee. He brought out that business would lose its fear of striking out for recovery if it knew in advance where Congress would place taxes. He said that removal of numerous taxes and replacement of that federal income by broadening of the income tax base might be a solution. Said he, ' We hear it said that capital is on strike. But, that is sheer nonsense. What we lack is a willingness to run the risk of employment against too many odds'

New York Board of Trade says 'nonsense' to charges on capital strike. ...

A black and white photo of a man in a suit. Public domain portrait photograph, free to use, no copyright restrictions image - Picryl description

Join the engineers and make American history First replacement regiment of engineers / / Schutte.

Join the engineers and make American history First replacement regimen...

U.S. Army recruiting poster showing a man in uniform holding an American flag with silhouette of a castle in the background. Poster caption continues: Now enlisting men between 18 to 21 and 31 to 41 ; Apply to ... More

Men from front lined up to turn in their clothing for replacement and disinfection at disinfecting plant no. 2, of the 26th Division The men shown here are of Battery F. 102d F.A. ... (Saacy, August 10, 1918).

Men from front lined up to turn in their clothing for replacement and ...

No. 888-G8. In album: Photographic supplement to historical record of quartermaster corps activities A.E.F. Vol. 19-A, p. 69.

Flooding - Glendale, Wis. , September 10, 2010 -- Tom Staadt, a Public Assistance Project Specialist, records data about a new water heater in Good Hope Elementary School in Glendale, WI. FEMA pays up to 75% of repair and replacement costs for eligible infrastructure damages. Photo by Ed Edahl/FEMA

Flooding - Glendale, Wis. , September 10, 2010 -- Tom Staadt, a Publi...

The original database describes this as: Title: FEMA Public Assistance Project Specialist at a school in Wisconsin Production Date: 09/10/2010 Caption: Glendale, Wis. , September 10, 2010 -- Tom Staadt, a P... More

Fort Knox, Kentucky. Every record of the classification section of the Armored Force Replacement Training Center tumbled when Private Preston G. Redd, of 4829-Fourth Avenue, Los Angeles, scored 159 on the general intelligence test out of the yet unattained 160 maximum possible. He also scored 141 in mechanical aptitude, 125 in radio aptitude, and 165 in clerical aptitude. He is approaching his 19th birthday, and when inducted was a pre-medical student. He is being welcomed into the Armored by Brigadier General Henry C. Newton

Fort Knox, Kentucky. Every record of the classification section of the...

Picryl description: Public domain image of military personnel, army, group photograph, armed people in uniform, war inspection, free to use, no copyright restrictions.

Peter Cournoyer's Replacement Calves, 1936 Rehabilitation Client, Yankton Agency

Peter Cournoyer's Replacement Calves, 1936 Rehabilitation Client, Yank...

Photographs Public domain photograph - United States History, free to use, no copyright restrictions image - Picryl description

6,750 airplanes equal 15 Battleships--Cook. Washington, D.C., Feb. 25. Testifying before the House Naval Affairs Committee today, Rear Admiral Arthur B. Cook, Chief of the Navy Department Bureau of Aeronautics, declared that it would take 6,750 airplanes to give the same volume of fire in one hour of 15 battleships. The cost of the 6,750 planes would be approximately seven times that of the 15 battleships if replacement requirements of the airplanes were considered, 2/25/38

6,750 airplanes equal 15 Battleships--Cook. Washington, D.C., Feb. 25....

A black and white photo of three men sitting at a table. Public domain portrait photograph, free to use, no copyright restrictions image - Picryl description

Migrant steeple-jack buying a replacement connecting rod at secondhand automobile parts store. Prague, Oklahoma, Lincoln County

Migrant steeple-jack buying a replacement connecting rod at secondhand...

Picryl description: Public domain image of a factory worker, plant, manufacture, assembly line, industrial facility, early 20th-century industrial architecture, free to use, no copyright restrictions. show less

War ration book no. 3. This new ration book, replacement for present books when their stamps are used up, will be distributed during the early summer. It contains four pages of "point" stamps, similar to the point stamps in war ration book 2, though slightly different in design and printed in brown ink. It also contains four pages of "unit" stamps for the type of rationing now used for sugar, coffee, and shoes. Each page of fourty-eight stamps bears the design of a different war machine, including guns, tanks, aircraft carriers and planes

War ration book no. 3. This new ration book, replacement for present b...

Picryl description: Public domain image of postal stamp, free to use, no copyright restrictions

U.S. Capitol. Progress photos of roof replacement over Senate and House chamber VI

U.S. Capitol. Progress photos of roof replacement over Senate and Hous...

Picryl description: Public domain photograph of a historic Capitol building, free to use, no copyright restrictions.

San Diego, California. Union sign at the replacement cantonment of the coast artillery

San Diego, California. Union sign at the replacement cantonment of the...

Public domain photograph of a history of California, no copyright restrictions image - Picryl description

Sign of camp headquarters at replacement cantonment of coast artillery. San Diego, California

Sign of camp headquarters at replacement cantonment of coast artillery...

Picryl description: Public domain historical photo of camp, free to use, no copyright restrictions image.

8th Army in Tripoli. A Royal Air Force salvage unit plows through mud and water carrying replacement parts which will return a damaged plane to action in the Tripoli campaign

8th Army in Tripoli. A Royal Air Force salvage unit plows through mud ...

Picryl description: Public domain image of military vehicle, automobile, tractor truck, free to use, no copyright restrictions.

U.S. Capitol. Progress photos of roof replacement over Senate and House chamber V

U.S. Capitol. Progress photos of roof replacement over Senate and Hous...

Picryl description: Public domain photograph of a historic Capitol building, free to use, no copyright restrictions.

War ration book no. 3. This new ration book, replacement for present books when their stamps are used up, will be distributed during the early summer. It contains four pages of "point" stamps, similar to the point stamps in war ration book 2, though slightly different in design and printed in brown ink. It also contains four pages of "unit" stamps for the type of rationing now used for sugar, coffee, and shoes. Each page of fourty-eight stamps bears the design of a different war machine, including guns, tanks, aircraft carriers and planes

War ration book no. 3. This new ration book, replacement for present b...

Public domain photograph of ornamental engraving print, decor, decorated panel, free to use, no copyright restrictions image - Picryl description

Men working on office building of replacement cantonment of coast artillery. San Diego, California

Men working on office building of replacement cantonment of coast arti...

Picryl description: Public domain image of a construction site, wooden frame, timber, free to use, no copyright restrictions.

War ration book no. 3. This new ration book, replacement for present books when their stamps are used up, will be distributed during the early summer. It contains four pages of "point" stamps, similar to the point stamps in war ration book 2, though slightly different in design and printed in brown ink. It also contains four pages of "unit" stamps for the type of rationing now used for sugar, coffee, and shoes. Each page of fourty-eight stamps bears the design of a different war machine, including guns, tanks, aircraft carriers and planes. One of each of these stamps is reproduced separately below the picture of the book. Important note: Actual dimensions of the point ration stamps are 7/8 inch x 1 inch, while the unit stamps are 7/16 inch x 1 inch. The U.S. Secret Service requests that ration stamps not be reproduced in actual size, but less than 3/4 or over 1 1/2 times. Also, stamps should not be reproduced in color. This photograph, if reproduced, same size, meets these requirements

War ration book no. 3. This new ration book, replacement for present b...

Picryl description: Public domain historical photo of Second World War, free to use, no copyright restrictions image.

U.S. Capitol. Progress photos of roof replacement over Senate and House chamber II

U.S. Capitol. Progress photos of roof replacement over Senate and Hous...

Picryl description: Public domain photograph of a historic Capitol building, free to use, no copyright restrictions.

Chinese-Americans get officer rank. Camp Barkeley, Texas, The first Chinese-Americans to be commissioned second lieutenants in the Medical Administrative Corps Officer Candidate School have received their bars at this Army center. The men are Calvin S. Chin, 28, of New York City, and Anthony Loo Wung Wong, 25 of Honolulu, Hawaii. Lieutenants Chin and Wong are now members of the Medical Department Officer's Replacement Pool at Camp Barkeley. Lieutenant Chin, native New Yorker, is the son of Me On Chin 35 Pell Street. He graduated from Stuyvesant High School in New York and was in the restaurant business before entering the Army. Serving first as an enlisted man, Chin next became Staff Sergeant assigned to a Medical Battalion at Camp Youn, California. Lieutenant Wong came from Hawaii to the United States for part of his education, and graduated from St. Louis College, Missouri, in 1934. Returning to Honolulu, he graduated from the Cannon School of Business and went to work for the Hawaiian Electric Company. Before entering the Officer Candidate School, Wong served in the Hawaiian National Guard

Chinese-Americans get officer rank. Camp Barkeley, Texas, The first Ch...

Picryl description: Public domain image of a uniform, military personnel, armed forces, free to use, no copyright restrictions.

War ration book no. 3. This new ration book, replacement for present books when their stamps are used up, will be distributed during the early summer. It contains four pages of "point" stamps, similar to the point stamps in war ration book 2, though slightly different in design and printed in brown ink. It also contains four pages of "unit" stamps for the type of rationing now used for sugar, coffee, and shoes. Each page of fourty-eight stamps bears the design of a different war machine, including guns, tanks, aircraft carriers and planes

War ration book no. 3. This new ration book, replacement for present b...

Picryl description: Public domain image of postal stamp, free to use, no copyright restrictions

U.S. Capitol. Progress photos of roof replacement over Senate and House chamber III

U.S. Capitol. Progress photos of roof replacement over Senate and Hous...

Picryl description: Public domain photograph of a historic Capitol building, free to use, no copyright restrictions.

War ration book no. 3. This new ration book, replacement for present books when their stamps are used up, will be distributed during the early summer. It contains four pages of "point" stamps, similar to the point stamps in war ration book 2, though slightly different in design and printed in brown ink. It also contains four pages of "unit" stamps for the type of rationing now used for sugar, coffee, and shoes. Each page of fourty-eight stamps bears the design of a different war machine, including guns, tanks, aircraft carriers and planes

War ration book no. 3. This new ration book, replacement for present b...

Picryl description: Public domain image of postal stamp, free to use, no copyright restrictions

U.S. Capitol. Progress photos of roof replacement over Senate and House chamber IV

U.S. Capitol. Progress photos of roof replacement over Senate and Hous...

Picryl description: Public domain photograph of a historic Capitol building, free to use, no copyright restrictions.

War ration book no. 3. This new ration book, replacement for present books when their stamps are used up, will be distributed during the early summer. It contains four pages of "point" stamps, similar to the point stamps in war ration book 2, though slightly different in design and printed in brown ink. It also contains four pages of "unit" stamps for the type of rationing now used for sugar, coffee, and shoes. Each page of fourty-eight stamps bears the design of a different war machine, including guns, tanks, aircraft carriers and planes

War ration book no. 3. This new ration book, replacement for present b...

Public domain photograph of the United States military and military-industrial complex before World War Two, 1930s, free to use, no copyright restrictions image - Picryl description

War ration book no. 3. This new ration book, replacement for present books when their stamps are used up, will be distributed during the early summer. It contains four pages of "point" stamps, similar to the point stamps in war ration book 2, though slightly different in design and printed in brown ink. It also contains four pages of "unit" stamps for the type of rationing now used for sugar, coffee, and shoes. Each page of fourty-eight stamps bears the design of a different war machine, including guns, tanks, aircraft carriers and planes

War ration book no. 3. This new ration book, replacement for present b...

Public domain photograph of 1930s America, free to use, no copyright restrictions image - Picryl description

Series of barracks under construction at the replacement cantonment of the coast artillery. San Diego, California

Series of barracks under construction at the replacement cantonment of...

Public domain photograph of 1930s-1940s US industrial development, Second World War, US war production, indusry, no copyright restrictions image - Picryl description

Uniform for engineer replacement center, Fort Belvoir, Virginia

Uniform for engineer replacement center, Fort Belvoir, Virginia

Poster showing several uniforms for use at particular functions and various times during tour of duty. Work Projects Administration Poster Collection (Library of Congress).

Pittsburgh, Pennsylvania (vicinity). Montour no. 4 mine of the Pittsburgh Coal Company. Wear and tear on equipment in the mines is tremendous and the war makes replacement nearly impossible, so machinery is being constantly re-built in the machine shop which is located within the mine many thousands of feet below the surface

Pittsburgh, Pennsylvania (vicinity). Montour no. 4 mine of the Pittsbu...

Public domain photograph of Pennsylvania in 1930s, free to use, no copyright restrictions image - Picryl description

Industrial salvage. Marine iron and steel scrap. Iron and steel scrap, left over from the repair and replacement of marine boilers, turbine engines and other equipment, now ready for removal from the Seabrook, Louisiana yard of the Standard Dredging Corporation. Much of the old metal from heavy dredgers and from Eagle boats of the last war will go to sea again in our new merchant ships and fighting craft. Standard Dredging Corporation

Industrial salvage. Marine iron and steel scrap. Iron and steel scrap,...

Public domain photograph of World War One military equipment, vehicle, free to use, no copyright restrictions image - Picryl description

One year of reciprocal aid. Australian sheep are producing wool for replacement uniforms for American soldiers and nurses, thus saving valuable shipping space for carrying munitions and supplies from the United States. They fill two roles in the war effort as hundreds of thousands of pounds of Australian mutton are served annually in the American soldiers' mess

One year of reciprocal aid. Australian sheep are producing wool for re...

Public domain image of a rural landscape, agriculture, farm animals, livestock, pasture, free to use, no copyright restrictions - Picryl description

Aberdeen Proving Ground, Maryland. Mrs. Franklin D. Roosevelt looking on as men of the Ordnance Replacement Training Center take an examination in the principles of ammunition supply. Mrs. Roosevelt was particularly interested in observing the methods used by the Army in teaching men who have had little or no formal education. At left is Brigadier General Bethel W. Simpson, who escorted her around the post

Aberdeen Proving Ground, Maryland. Mrs. Franklin D. Roosevelt looking ...

Public domain photograph related to Franklin Delano Roosevelt, free to use, no copyright restrictions image - Picryl description

Pittsburgh, Pennsylvania (vicinity). Montour no. 4 mine of the Pittsburgh Coal Company. Wear and tear on equipment in the mines is tremendous and the war makes replacement nearly impossible, so machinery is being constantly re-built in the machine shop which is located within the mine many thousands of feet below the surface

Pittsburgh, Pennsylvania (vicinity). Montour no. 4 mine of the Pittsbu...

Public domain photograph of 1930s-1940s US industrial development, Second World War, US war production, indusry, no copyright restrictions image - Picryl description

Fort Sill, Oklahoma. Early morning sun gives little warmth to these men of Battery C, 26th Battalion, in the Field Artillery Replacement Training Center. A mule-pack outfit, they carry on, rain or shine, hot or cold, complete with their canine mascots

Fort Sill, Oklahoma. Early morning sun gives little warmth to these me...

Public domain photograph - historical image of Oregon, United States, free to use, no copyright restrictions image - Picryl description

Pittsburgh, Pennsylvania (vicinity). Montour no. 4 mine of the Pittsburgh Coal Company. Wear and tear on equipment in the mines is tremendous and the war makes replacement nearly impossible, so machinery is being constantly re-built in the machine shop which is located within the mine many thousands of feet below the surface

Pittsburgh, Pennsylvania (vicinity). Montour no. 4 mine of the Pittsbu...

Public domain photograph of industrial architecture, factory building, free to use, no copyright restrictions image - Picryl description

Fort Sill, Oklahoma. Muleteers and cannoneers rolled in one, the men of Battery C, 26th Battalion, Field Artillery Replacement Training Center, consider the most impossible terrain part of the day's work. With their guns and auxiliary equipment slung on the backs of army mules, they break through thick forests, ford streams, and scale mountain ranges. Their job is to go where mechanized and horse-drawn artillery can't go

Fort Sill, Oklahoma. Muleteers and cannoneers rolled in one, the men o...

Picryl description: Public domain image of military training, armed forces fort, camp, exercise activity, free to use, no copyright restrictions.

Industrial salvage. Marine iron and steel scrap. Iron and steel scrap, left over from the repair and replacement of marine boilers, turbine engines and other equipment, now ready for removal from the Seabrook, Louisiana yard of the Standard Dredging Corporation. Much of the old metal from heavy dredgers and from Eagle boats of the last war will go to sea again in our new merchant ships and fighting craft. Standard Dredging Corporation

Industrial salvage. Marine iron and steel scrap. Iron and steel scrap,...

Picryl description: Public domain image of an industrial equipment, workshop, assembly line, factory, power engine, 19th-20th century, free to use, no copyright restrictions.

Pittsburgh, Pennsylvania (vicinity). Montour no. 4 mine of the Pittsburgh Coal Company. Wear and tear on equipment in the mines is tremendous and the war makes replacement nearly impossible, so machinery is being constantly re-built in the machine shop which is located within the mine many thousands of feet below the surface

Pittsburgh, Pennsylvania (vicinity). Montour no. 4 mine of the Pittsbu...

Public domain photograph of Pennsylvania in 1930s, free to use, no copyright restrictions image - Picryl description

Industrial salvage. Marine iron and steel scrap. Iron and steel scrap, left over from the repair and replacement of marine boilers, turbine engines and other equipment, now ready for removal from the Seabrook, Louisiana yard of the Standard Dredging Corporation. Much of the old metal from heavy dredgers and from Eagle boats of the last war will go to sea again in our new merchant ships and fighting craft. Standard Dredging Corporation

Industrial salvage. Marine iron and steel scrap. Iron and steel scrap,...

Picryl description: Public domain image of a damaged, burned, or destroyed building, natural disaster, war destruction, ruins, 19th-century architecture, free to use, no copyright restrictions.

Left to right: Private Asser Llomaki of Mason, New Hampshire; Staff Sergeant D.E. Horton of Painted Post, New York; Staff Sergeant C.L. Hoopman of Ionia, Michagan working on the tail of a B-17 Flying Fortress at a replacement center somewhere in England. The bomber was damaged in raids over occupied France and Germany

Left to right: Private Asser Llomaki of Mason, New Hampshire; Staff Se...

Picryl description: Public domain image of a bomber aircraft, military aviation, air forces, free to use, no copyright restrictions.

Tire recapping. The tread surface of a used tire is ground evenly to permit application of a reclaimed camelback rubber recap. The plan to recap passenger tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. The tread surface of a used tire is ground evenly to p...

Public domain photograph - working class people, the 1930s United States, work, labor, worker, free to use, no copyright restrictions image - Picryl description

Tire recapping. A newly recapped passenger car tire is put in the "finished" rack to await pickup by the owner. The plan to recap passenger tires with reclaimed rubber camelback, approved by Rubber Director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. A newly recapped passenger car tire is put in the "fin...

Public domain photograph of 1930s-1940s industrial development, no copyright restrictions image - Picryl description

Tire recapping. Removing a recapped passenger car tire from a curing mold. Before the curing process the tread surface had been ground down evenly and had a strip of reclaimed camelback rubber attached to it. The plan to recap passenger tires with passenger tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. Removing a recapped passenger car tire from a curing m...

Picryl description: Public domain image of an industrial building, factory, workshop, workers, 19th-20th century, free to use, no copyright restrictions.

Tire recapping. Preparing a worn automobile tire for recapping. The operator applied a coating of rubber adhesive after the tread surface of the tire has been ground down evenly. The plan to recap passenger tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. Preparing a worn automobile tire for recapping. The op...

Public domain photograph of 1930s-1940s industrial development, no copyright restrictions image - Picryl description

Tire recapping. Removing a recapped passenger car tire from a curing mold. Before the curing process the tread surface had been ground down evenly and had a strip of reclaimed camelback rubber attached to it. The plan to recap passenger tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. Removing a recapped passenger car tire from a curing m...

Picryl description: Public domain image of a worker, labor, factory, plant, manufacture, industrial facility, 1930s, mid-20th-century industrial photo, free to use, no copyright restrictions.

Tire recapping. A newly recapped passenger car tire to go back on the wheel. The plan to recap passenger tires with reclaimed rubber camelback, approved by Rubber Director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. A newly recapped passenger car tire to go back on the ...

Public domain photograph of 1930s-1940s US industrial development, Second World War, US war production, indusry, no copyright restrictions image - Picryl description

Tire recapping. Recapping a worn passenger car tire. Reclaimed camelback rubber is applied after the old tread surface of the tire has been ground down evenly and coated with rubber adhesive. The plan to recap passenger tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. Recapping a worn passenger car tire. Reclaimed camelba...

Picryl description: Public domain image of an industrial building, factory, workshop, workers, 20th century, free to use, no copyright restrictions.

Tire recapping. Recapping a worn passenger car tire. Reclaimed camelback rubber is applied after the old tread surface of the tire has been ground down evenly and coated with rubber adhesive. The plan to recap passenger tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. Recapping a worn passenger car tire. Reclaimed camelba...

Public domain photograph of a machine part, motor, equipment, free to use, no copyright restrictions image - Picryl description

Tire recapping. A service attendant points out a worn tire that may be recapped under a new plan which removes restrictions on reclaimed camelback rubber for passenger tires. The plan to recap passenger car tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. A service attendant points out a worn tire that may be...

Picryl description: Public domain historical photo of Second World War, free to use, no copyright restrictions image.

Tire recapping. Removing a recapped passenger car tire from a curing mold. Before the curing process the tread surface had been ground down evenly and had a strip of reclaimed camelback rubber attached to it. The plan to recap passenger tires with passenger tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. Removing a recapped passenger car tire from a curing m...

Picryl description: Public domain image of a factory, plant, manufacture, assembly line, industrial facility, early 20th-century industrial architecture, free to use, no copyright restrictions.

Tire recapping. "Cooking" a recapped passenger car tire in a curing mold. The recap is made by applying passenger type reclaimed camelback to a worn casing on which the tread surface had previously been ground down evenly. The plan to recap passenger tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. "Cooking" a recapped passenger car tire in a curing mo...

Picryl description: Public domain image of an industrial building, factory, workshop, workers, 20th century, free to use, no copyright restrictions.

Tire recapping. A recap job on a passenger car tire. The tire with a tread strip of reclaimed camelback rubber is put into a curing mold. The old tread surface had previously been ground down evenly and coated with rubber adhesive. The plan to recap passenger tires with reclaimed rubber camelback, approved by rubber director William M. Jeffers, was put into effect in February 1943 to reduce the demand for replacement tires and still keep civilian cars in service

Tire recapping. A recap job on a passenger car tire. The tire with a t...

Picryl description: Public domain image of a worker, labor, factory, plant, manufacture, industrial facility, 1930s, mid-20th-century industrial photo, free to use, no copyright restrictions.

040817-F-4201N-005 (Aug. 17, 2004)Ron Owsley, American Mechanical, checks the progress as he cuts through a steam line pipe on Eielson Air Force Base (AFB), Alaska (AK). Mr. Owsley is working on utilidor replacement heating, water, and sewer pipes, this is an above ground insulated network of pipes and cables. American Mechanical is in phase 4 of the upgrade process, improving the quality of life in Alaska by replacing the original pipes installed throughout the state of Alaska in the 1950s. U.S. Air Force PHOTO by AIRMAN Anthony Nelson Jr. (RELEASED)

040817-F-4201N-005 (Aug. 17, 2004)Ron Owsley, American Mechanical, che...

The original finding aid described this photograph as: Base: Eielson Air Force Base State: Alaska (AK) Country: United States Of America (USA) Scene Camera Operator: AMN Anthony Nelson Jr., USAF Release St... More

184-inch cyclotron, magnet coil maple replacement. Photo taken 1/05/1956. 184"-1380 Principal Investigator/Project: Analog Conversion Project

184-inch cyclotron, magnet coil maple replacement. Photo taken 1/05/19...

Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. This is Noguchi’s first Shuttle flight. He represents the Japan Aerospace Exploration Agency. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. KSC-05pp1797

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguch...

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. This is Noguchi’s first Shuttle fl... More

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, old racks are being excessed in high bay 3 in the Vehicle Assembly Building, or VAB, as part of a centerwide refurbishment initiative under the Ground Systems Development and Operations GSDO Program The cable replacement project is under way in high bays 1 and 3 on the east side of the building, facing Launch Complex 39’s pads A and B. Approximately 150 miles of existing Apollo/shuttle era cabling is being removed to make room for installation of state-of-the-art command, communication and control systems that will be needed by future users to perform vehicle testing and verification prior to rollout to the launch pad. For more information, visit http://go.nasa.gov/groundsystems. Photo credit: NASA/Jim Grossmann KSC-2012-2595

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, old ...

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, old racks are being excessed in high bay 3 in the Vehicle Assembly Building, or VAB, as part of a centerwide refurbishment initiative under the ... More

CAPE CANAVERAL, Fla. – In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center cuts away the protective wrapping from the Orbital Replacement Unit Carrier for the Hubble Space Telescope. The Orbital Replacement Unit Carrier, or ORUC, is one of four carriers supporting hardware for space shuttle Atlantis' STS-125 mission to service the telescope. The Super Lightweight Interchangeable Carrier, or SLIC, and the Flight Support System, or FSS, have also arrived at Kennedy. The Multi-Use Lightweight Equipment carrier will be delivered in late July. The carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the Hubble servicing mission, targeted for launch Oct. 8. Photo credit: NASA/Jack Pfaller KSC-08pd2076

CAPE CANAVERAL, Fla. – In the high bay of the Payload Hazardous Servic...

CAPE CANAVERAL, Fla. – In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center cuts away the protective wrapping from the Orb... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, arcane moves the cover of the shipping container away from its cargo, the Multi-Use Lightweight Equipment (MULE) carrier. The MULE is part of the payload for the fifth and final shuttle servicing mission to NASA's Hubble Space Telescope, STS-125. The MULE carrier will join the Flight Support System, the Super Lightweight Interchangeable Carrier and the Orbital Replacement Unit Carrier in the Payload Hazardous Servicing Facility where the Hubble payload is being prepared for launch. The Relative Navigation Sensors and the New Outer Blanket Layers will be on the MULE. The payload is scheduled to go to Launch Pad 39A in mid-September to be installed into Atlantis' payload bay. Atlantis is targeted to launch Oct. 8 at 1:34 a.m. EDT. .Photo credit: NASA/Amanda Diller KSC-08pd2298

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at ...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, arcane moves the cover of the shipping container away from its cargo, the Multi-Use Lightweight Equipment (MULE... More

KENNEDY SPACE CENTER, FLA. -- Technicians unload the replacement wrist joint for the Space Station Remote Manipulator System before installing it in Space Shuttle Endeavour's payload bay. The new wrist joint, called an Orbital Replacement Unit (ORU), will be installed next to the arm's Latching End Effector during the final of three planned spacewalks. Mission STS-111 is designated UF-2, the 14th assembly flight to the International Space Station. Endeavour's payload includes the Multi-Purpose Logistics Module Leonardo and Mobile Base System. The mission also will swap resident crews on the Station, carrying the Expedition 5 crew and returning to Earth Expedition 4. Liftoff of Endeavour is scheduled between 4 and 8 p.m. May 30, 2002 KSC-02pd0640

KENNEDY SPACE CENTER, FLA. -- Technicians unload the replacement wrist...

KENNEDY SPACE CENTER, FLA. -- Technicians unload the replacement wrist joint for the Space Station Remote Manipulator System before installing it in Space Shuttle Endeavour's payload bay. The new wrist joint, c... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is lifted from a stand to be installed on the Orbital Replacement Unit Carrier, or ORUC. The carrier will be installed in space shuttle Atlantis’ payload bay. The camera will record the STS-125 mission to service the Hubble Space Telescope. Space shuttle Atlantis' 11-day flight is targeted for launch May 12 and will include five spacewalks in which astronauts will refurbish and upgrade the telescope with state-of-the-art science instruments. As a result, Hubble's capabilities will be expanded and its operational lifespan extended through at least 2014. Photo credit: NASA/Dimitri Gerondidakis KSC-2009-2341

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at ...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is lifted from a stand to be installed on the Orbital Replacement Unit Carrier, or ORUC. Th... More

CAPE CANAVERAL, Fla. – A second shipping container of major flight hardware for space shuttle Atlantis' STS-125 mission to NASA's Hubble Space Telescope arrives at the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center to begin preparations for its targeted October launch. The container holds the Super Lightweight Interchangeable Carrier, or SLIC, and the Orbital Replacement Unit Carrier, or ORUC. The payload carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the servicing mission. The three payload carriers or pallets are the Flight Support System, the SLIC and the ORUC. At the end of July, a fourth and final carrier, the Multi-Use Lightweight Equipment carrier will join the others in the Payload Hazardous Servicing Facility where the Hubble payload is being prepared for launch. Photo credit: NASA/Amanda Diller KSC-08pd2021

CAPE CANAVERAL, Fla. – A second shipping container of major flight h...

CAPE CANAVERAL, Fla. – A second shipping container of major flight hardware for space shuttle Atlantis' STS-125 mission to NASA's Hubble Space Telescope arrives at the Payload Hazardous Servicing Facility at ... More

CAPE CANAVERAL, Fla. – Technicians in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center install a specialized overhead crane onto the Fine Guidance Sensor, or FGS. The sensor will be lifted and moved to the Orbital Replacement Unit Carrier or ORUC, for installation. An FGS consists of a large structure housing a collection of mirrors, lenses, servos, prisms, beam splitters and photomultiplier tubes. There are three fine guidance sensors on Hubble located at 90-degree intervals around the circumference of the telescope. Along with the gyroscopes, the optical sensors are a key component of Hubble’s highly complex but extraordinarily effective “pointing control system.” The ORUC is one of three carriers that are being prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the fifth and final Hubble servicing mission, STS-125, on space shuttle Atlantis. Launch is targeted for Oct. 8. Photo credit: NASA/Jim Grossmann KSC-08pd2347

CAPE CANAVERAL, Fla. – Technicians in the Payload Hazardous Servicin...

CAPE CANAVERAL, Fla. – Technicians in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center install a specialized overhead crane onto the Fine Guidance Sensor, or FGS. The sensor will be lif... More

KENNEDY SPACE CENTER, FLA. -- This closeup shows the internal connector to which the replacement feed-through connector in the engine cutoff, or ECO, sensor system on space shuttle Atlantis' external tank will be installed. The feed-through connector passes the wires from the inside of the tank to the outside. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The pins in the replacement connector have been precisely soldered to create a connection that allows sensors inside the tank to send signals to the computers onboard Atlantis. The work is being done on Launch Pad 39A. Space shuttle Atlantis is now targeted for launch on Feb. 7. Photo credit: NASA/George Shelton KSC-08pd0038

KENNEDY SPACE CENTER, FLA. -- This closeup shows the internal connect...

KENNEDY SPACE CENTER, FLA. -- This closeup shows the internal connector to which the replacement feed-through connector in the engine cutoff, or ECO, sensor system on space shuttle Atlantis' external tank will... More

KENNEDY SPACE CENTER, FLA. - Viewed from a camera in the midst of Florida greenery across the marshy water, Space Shuttle Discovery leaps through billows of smoke and steam on Launch Pad 39B on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. This is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. KSC-05pp1779

KENNEDY SPACE CENTER, FLA. - Viewed from a camera in the midst of Fl...

KENNEDY SPACE CENTER, FLA. - Viewed from a camera in the midst of Florida greenery across the marshy water, Space Shuttle Discovery leaps through billows of smoke and steam on Launch Pad 39B on the historic R... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers check the attachments on the ground support equipment for the STS-125 Hubble Servicing Mission as it is transferred to a work stand. The GSE are carriers, or pallets, that will hold equipment in space shuttle Atlantis’ payload bay. Under the protective covering of the carrier can be seen the soft capture mechanism. The carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the servicing mission. The three payload carriers or pallets are the Flight Support System, the Super Lightweight Interchangeable Carrier and the Orbital Replacement Unit Carrier. At the end of July, a fourth and final carrier, the Multi-Use Lightweight Equipment carrier will join the others in the Payload Hazardous Servicing Facility where the Hubble payload is being prepared for launch. Photo credit: NASA/Cory Huston KSC-08pd2010

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers check the attachments on the ground support equipment for the STS-125 Hubble Servicing Mission as it i... More

KENNEDY SPACE CENTER, FLA. -- For the fourth time in Space Shuttle Program history, 350,000 gallons of water are released on a Mobile Launcher Platform (MLP) at Launch Pad 39A during a water sound suppression test. Because of the unusual event, media and workers watch from nearby vantage points on the Fixed Service Structure (left). This test is being conducted following the replacement of the six main system valves, which had been in place since the beginning of the Shuttle Program and had reached the end of their service life. Also, the hydraulic portion of the valve actuators has been redesigned and simplified to reduce maintenance costs. The sound suppression water system is installed on the launch pads to protect the orbiter and its payloads from damage by acoustical energy reflected from the MLP during launch. The system includes an elevated water tank with a capacity of 300,000 gallons. The tank is 290 feet high and stands on the northeast side of the Pad. The water is released for launch just before the ignition of the orbiter's three main engines and twin solid rocket boosters, and flows through parallel 7-foot-diameter pipes to the Pad area. KSC-04pd1066

KENNEDY SPACE CENTER, FLA. -- For the fourth time in Space Shuttle Pro...

KENNEDY SPACE CENTER, FLA. -- For the fourth time in Space Shuttle Program history, 350,000 gallons of water are released on a Mobile Launcher Platform (MLP) at Launch Pad 39A during a water sound suppression t... More

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39-A, the STS-111 and Expedition Five crews take time out from a tour of the pad with their friends and family to pose for a group portrait. From left, they are STS-111 Pilot Paul Lockhart, STS-111 Commander Kenneth Cockrell, Expedition Five Commander Valeri Korzun (RSA), Expedition Five astronaut Peggy Whitson, Expedition Five cosmonaut Sergei Treschev (RSA), and STS-111 Mission Specialists Philippe Perrin (CNES) and Franklin Chang-Diaz. Expedition Five is traveling to the International Space Station on Space Shuttle Endeavour as the replacement crew for Expedition Four, who will return to Earth aboard the orbiter. Known as Utilization Flight 2, STS-111 is carrying supplies and equipment to the Station. The payload includes the Multi-Purpose Logistics Module Leonardo, the Mobile Base System, which will be installed on the Mobile Transporter to complete the Canadian Mobile Servicing System, or MSS, and a replacement wrist/roll joint for Canadarm 2. The mechanical arm will then have the capability to "inchworm" from the U.S. Lab Destiny to the MSS and travel along the truss to work sites. Launch is scheduled for May 30, 2002 KSC-02pd0814

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39-A, the STS-111 and Expe...

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39-A, the STS-111 and Expedition Five crews take time out from a tour of the pad with their friends and family to pose for a group portrait. From left, they are STS-... More

CAPE CANAVERAL, Fla. – A second shipping container of major flight hardware for space shuttle Atlantis' STS-125 mission to NASA's Hubble Space Telescope is moved into the airlock at the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center. The container holds the Super Lightweight Interchangeable Carrier, or SLIC, and the Orbital Replacement Unit Carrier, or ORUC. In the facility, preparations will begin for its targeted October launch. The payload carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the servicing mission. The three payload carriers or pallets are the Flight Support System, the SLIC and the ORUC. At the end of July, a fourth and final carrier, the Multi-Use Lightweight Equipment carrier will join the others in the Payload Hazardous Servicing Facility where the Hubble payload is being prepared for launch. Photo credit: NASA/Amanda Diller KSC-08pd2023

CAPE CANAVERAL, Fla. – A second shipping container of major flight h...

CAPE CANAVERAL, Fla. – A second shipping container of major flight hardware for space shuttle Atlantis' STS-125 mission to NASA's Hubble Space Telescope is moved into the airlock at the Payload Hazardous Serv... More

CAPE CANAVERAL, Fla. – In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center removes the protective wrapping from the Orbital Replacement Unit Carrier for the Hubble Space Telescope. The Orbital Replacement Unit Carrier, or ORUC, is one of four carriers supporting hardware for space shuttle Atlantis' STS-125 mission to service the telescope. The Super Lightweight Interchangeable Carrier, or SLIC, and the Flight Support System, or FSS, have also arrived at Kennedy. The Multi-Use Lightweight Equipment carrier will be delivered in late July. The carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the Hubble servicing mission, targeted for launch Oct. 8. Photo credit: NASA/Jack Pfaller KSC-08pd2081

CAPE CANAVERAL, Fla. – In the high bay of the Payload Hazardous Servic...

CAPE CANAVERAL, Fla. – In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center removes the protective wrapping from the Orbit... More

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A at NASA's Kennedy Space Center, a technician gets ready to place the cover over the engine cutoff, or ECO, sensor system connector and wiring on space shuttle Atlantis' external tank. The feed-through connector passes the wires from the inside of the tank to the outside. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The pins in the replacement connector were precisely soldered to create a connection that allows sensors inside the tank to send signals to the computers onboard Atlantis. The launch date for the shuttle's STS-122 mission has now been targeted for Feb. 7. Photo credit: NASA/Kim Shiflett KSC-08pd0071

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A at NASA's Kennedy Sp...

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A at NASA's Kennedy Space Center, a technician gets ready to place the cover over the engine cutoff, or ECO, sensor system connector and wiring on space shuttle A... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, the transporter holds the container with the second shipment of hardware space shuttle Atlantis' STS-125 mission to NASA's Hubble Space Telescope. The container holds the Super Lightweight Interchangeable Carrier, or SLIC, and the Orbital Replacement Unit Carrier, or ORUC. Another payload carrier, the Flight Support System, has already been delivered, and the Multi-Use Lightweight Equipment carrier will be delivered in late July. The carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the Hubble servicing mission, targeted for launch Oct. 8. Photo credit: NASA/Jack Pfaller KSC-08pd2039

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility a...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, the transporter holds the container with the second shipment of hardware space shuttle Atlantis' STS-125 miss... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, technicians oversee the lifting of the Cosmic Origins Spectrograph, or COS, from a stand. The COS will be moved to and placed on the Orbital Replacement Unit Carrier that will be installed in space shuttle Atlantis' payload bay. The COS is part of the payload for the Hubble servicing mission, STS-125, targeted to launch in mid-May. Installing the COS during the mission will effectively restore spectroscopy to Hubble’s scientific arsenal, and at the same time provide the telescope with unique capabilities. COS is designed to study the large-scale structure of the universe and how galaxies, stars and planets formed and evolved. It will help determine how elements needed for life such as carbon and iron first formed and how their abundances have increased over the lifetime of the universe. Photo credit: NASA/Kim Shiflett KSC-2009-2162

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at ...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, technicians oversee the lifting of the Cosmic Origins Spectrograph, or COS, from a stand. The COS w... More

CAPE CANAVERAL, Fla. -- Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians remove the top emergency escape window from space shuttle Atlantis. The window is being removed in order to gain access to remove hazardous pyrotechnics from the shuttle. The window will be shipped to Johnson Space Center in Houston for inspections and a replacement outer pane will be installed in its place. The work is part of the Space Shuttle Program’s transition and retirement processing of shuttle Atlantis. The shuttle is being prepared for display at the Kennedy Space Center Visitor Complex in Florida. Photo credit: NASA/Kim Shiflett KSC-2012-1003

CAPE CANAVERAL, Fla. -- Inside Orbiter Processing Facility-2 at NASA’s...

CAPE CANAVERAL, Fla. -- Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians remove the top emergency escape window from space shuttle Atlantis. The window is being re... More

KENNEDY SPACE CENTER, FLA. - In the Crawler Transporter (CT) area, a worker offloads some of the new crawler shoes that arrived. In the background is one of the two CTs. The new shoes were manufactured by ME Global in Duluth, Minn. The CT transports the Mobile Launcher Platform, with the assembled Space Shuttle aboard, between the refurbishment area, the VAB and Launch Complex Pads 39A and 39B. The crawlers have 456 shoes, 57 per belt (8 belts in all). Each shoe weighs 2,200 pounds. The original shoes were manufactured for the Apollo Program. Cracks appeared in the shoes in recent years spurring a need for replacement. The new manufacturer, in Duluth, Minn., has improved the design for Return to Flight and use through the balance of the Space Shuttle Program. KSC-04pd2136

KENNEDY SPACE CENTER, FLA. - In the Crawler Transporter (CT) area, a w...

KENNEDY SPACE CENTER, FLA. - In the Crawler Transporter (CT) area, a worker offloads some of the new crawler shoes that arrived. In the background is one of the two CTs. The new shoes were manufactured by ME G... More

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Stephen Robinson is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. KSC-05pp1799

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Stephen Robin...

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Stephen Robinson is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. The Return to Flight mission to ... More

KENNEDY SPACE CENTER, Fla. -- STS-108 Mission Specialist Daniel M. Tani is ready to practice driving an M-113 armored personnel carrier. He and other crew members are taking part in Terminal Countdown Demonstration Test activities, which include emergency exit from the launch pad and a simulated launch countdown. STS-108 is a Utilization Flight that will carry the replacement Expedition 4 crew to the International Space Station, as well as the Multi-Purpose Logistics Module Raffaello, filled with supplies and equipment. The l1-day mission is scheduled for launch Nov. 29 on Space Shuttle Endeavour KSC-01PP1653

KENNEDY SPACE CENTER, Fla. -- STS-108 Mission Specialist Daniel M. Ta...

KENNEDY SPACE CENTER, Fla. -- STS-108 Mission Specialist Daniel M. Tani is ready to practice driving an M-113 armored personnel carrier. He and other crew members are taking part in Terminal Countdown Demonst... More

CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, an overhead crane lifts the Orbital Replacement Unit Carrier, or ORUC, and moves it across the floor to install it in the payload canister. The carrier is one of four associated with the STS-125 mission to service the Hubble Space Telescope. It will be installed in the payload canister for transfer to Launch Pad 39A. At the pad, all the carriers will be loaded into space shuttle Atlantis’ payload bay. Launch of Atlantis is targeted for Oct. 10. Photo credit: NASA/Jack Pfaller KSC-08pd2713

CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility at...

CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, an overhead crane lifts the Orbital Replacement Unit Carrier, or ORUC, and moves it across the floor to instal... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, the Soft Capture Mechanism (SCM), part of the Soft Capture and Rendezvous System, or SCRS, is being prepared for transfer to the Flight Support System, or FSS, carrier. The SCRS will enable the future rendezvous, capture and safe disposal of NASA's Hubble Space Telescope by either a crewed or robotic mission. The ring-like device attaches to Hubble’s aft bulkhead. The SCRS greatly increases the current shuttle capture interfaces on Hubble, therefore significantly reducing the rendezvous and capture design complexities associated with the disposal mission. The FSS will join the Multi-Use Lightweight Equipment, or MULE, carrier, the Super Lightweight Interchangeable Carrier and the Orbital Replacement Unit Carrier as payload on space shuttle Atlantis's STS-125 mission. The payload is scheduled to go to Launch Pad 39A in mid-September to be installed into Atlantis' payload bay. Atlantis is targeted to launch Oct. 8 at 1:34 a.m. EDT. Photo credit: NASA/Troy Cryder KSC-08pd2432

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, the Soft Capture Mechanism (SCM), part of the Soft Capture and Rendezvous System, or SCRS, is being prepared ... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is lifted and moved toward the Orbital Replacement Unit Carrier, or ORUC, for installation. The carrier will be installed in space shuttle Atlantis’ payload bay. The camera will record the STS-125 mission to service the Hubble Space Telescope. Space shuttle Atlantis' 11-day flight is targeted for launch May 12 and will include five spacewalks in which astronauts will refurbish and upgrade the telescope with state-of-the-art science instruments. As a result, Hubble's capabilities will be expanded and its operational lifespan extended through at least 2014. Photo credit: NASA/Dimitri Gerondidakis KSC-2009-2342

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at ...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is lifted and moved toward the Orbital Replacement Unit Carrier, or ORUC, for installation. ... More

CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center documents the installation of a pallet support strut on the Super Lightweight Interchangeable Carrier for the Hubble Space Telescope. The Super Lightweight Interchangeable Carrier, or SLIC, is one of four carriers supporting hardware for space shuttle Atlantis' STS-125 mission to service the telescope. SLIC is built with state-of-the-art, lightweight, composite materials - carbon fiber with a cyanate ester resin and a titanium metal matrix composite. These composites have greater strength-to-mass ratios than the metals typically used in spacecraft design. The Orbital Replacement Unit Carrier, or ORUC, and the Flight Support System, or FSS, have also arrived at Kennedy. The Multi-Use Lightweight Equipment carrier will be delivered in early August. The carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the Hubble servicing mission, targeted for launch Oct. 8. Photo credit: NASA/Jack Pfaller KSC-08pd2095

CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servi...

CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center documents the installation of a pallet suppor... More

CAPE CANAVERAL, Fla. – A second shipping container of major flight hardware for space shuttle Atlantis' STS-125 mission to NASA's Hubble Space Telescope is placed in the airlock at the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center. The container holds the Super Lightweight Interchangeable Carrier and the Orbital Replacement Unit Carrier. In the facility, preparations will begin for its targeted October launch. The payload carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the servicing mission. The three payload carriers or pallets are the Flight Support System, the SLIC and the ORUC. At the end of July, a fourth and final carrier, the Multi-Use Lightweight Equipment carrier will join the others in the Payload Hazardous Servicing Facility where the Hubble payload is being prepared for launch. Photo credit: NASA/Amanda Diller KSC-08pd2024

CAPE CANAVERAL, Fla. – A second shipping container of major flight h...

CAPE CANAVERAL, Fla. – A second shipping container of major flight hardware for space shuttle Atlantis' STS-125 mission to NASA's Hubble Space Telescope is placed in the airlock at the Payload Hazardous Servi... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, technicians check the sensors on the Soft Capture Mechanism (SCM), part of the Soft Capture and Rendezvous System, or SCRS, after mating of the SCM to the Flight Support System, or FSS, carrier. The SCRS will enable the future rendezvous, capture and safe disposal of NASA's Hubble Space Telescope by either a crewed or robotic mission. The ring-like device attaches to Hubble’s aft bulkhead. The SCRS greatly increases the current shuttle capture interfaces on Hubble, therefore significantly reducing the rendezvous and capture design complexities associated with the disposal mission. The FSS will join the Multi-Use Lightweight Equipment, or MULE, carrier, the Super Lightweight Interchangeable Carrier and the Orbital Replacement Unit Carrier as payload on space shuttle Atlantis's STS-125 mission. The payload is scheduled to go to Launch Pad 39A in mid-September to be installed into Atlantis' payload bay. Atlantis is targeted to launch Oct. 8 at 1:34 a.m. EDT. Photo credit: NASA/Troy Cryder KSC-08pd2445

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at ...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, technicians check the sensors on the Soft Capture Mechanism (SCM), part of the Soft Capture and Rendezvous Syst... More

KENNEDY SPACE CENTER, FLA. - Expedition 5 crew member Peggy Whitson undergoes a suit check as part of Terminal Countdown Demonstration Test activities at KSC. The TCDT includes emergency egress training at the pad and a simulated launch countdown. Expedition 5 will travel to the International Space Station on mission STS-111 as the replacement crew for Expedition 4, who will return to Earth aboard Endeavour. Known as Utilization Flight -2, the mission includes attaching a Canadian-built mobile base system to the International Space Station that will enable the Canadarm2 robotic arm to move along a railway on the Station's truss to build and maintain the outpost. The crew will also replace a faulty wrist/roll joint on the Canadarm2 as well as unload almost three tons of experiments and supplies from the Italian-built Multi-Purpose Logistics Module Leonardo. Launch of Space Shuttle Endeavour on mission STS-111 is scheduled for May 30, 2002 KSC-02pd0675

KENNEDY SPACE CENTER, FLA. - Expedition 5 crew member Peggy Whitson un...

KENNEDY SPACE CENTER, FLA. - Expedition 5 crew member Peggy Whitson undergoes a suit check as part of Terminal Countdown Demonstration Test activities at KSC. The TCDT includes emergency egress training at the... More

CAPE CANAVERAL, Fla. -- At Launch Pad 39A at Kennedy Space Center, a technician loads replacement parts for the Zvezda service module toilet on the International Space Station aboard space shuttle Discovery. The toilet malfunctioned last week and was initially repaired by replacing a microprocessor valve. After the station crew members experienced additional difficulties with the toilet, they were directed to use Soyuz toilet facilities at first and are using the main toilet again after rigging a urine bypass. The spare toilet parts have been added to Discovery’s manifest for delivery to the station on the STS-124 mission. On the 14-day mission, Discovery and its crew will deliver the Japan Aerospace Exploration Agency's Japanese Experiment Module – Pressurized Module and the Japanese Remote Manipulator System. Launch is scheduled for 5:02 p.m. EDT May 31. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd1465

CAPE CANAVERAL, Fla. -- At Launch Pad 39A at Kennedy Space Center, a ...

CAPE CANAVERAL, Fla. -- At Launch Pad 39A at Kennedy Space Center, a technician loads replacement parts for the Zvezda service module toilet on the International Space Station aboard space shuttle Discovery. T... More

CAPE CANAVERAL, Fla. – In the airlock of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers prepare to move the ground support equipment for the STS-125 Hubble Servicing Mission delivered July 16. The GSE are carriers, or pallets, that will hold equipment in space shuttle Atlantis’ payload bay. This carrier will be moved to a work stand. The carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the servicing mission. The three payload carriers or pallets are the Flight Support System, the Super Lightweight Interchangeable Carrier and the Orbital Replacement Unit Carrier. At the end of July, a fourth and final carrier, the Multi-Use Lightweight Equipment carrier will join the others in the Payload Hazardous Servicing Facility where the Hubble payload is being prepared for launch. Photo credit: NASA/Cory Huston KSC-08pd2004

CAPE CANAVERAL, Fla. – In the airlock of the Payload Hazardous Servi...

CAPE CANAVERAL, Fla. – In the airlock of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers prepare to move the ground support equipment for the STS-125 Hubble Servicing Mission ... More

CAPE CANAVERAL, Fla. – At the Canister Rotation Facility at NASA's Kennedy Space Center, the shipping container with the Multi-Use Lightweight Equipment (MULE) carrier inside is pressure cleaned after its arrival. The MULE is part of the payload for the fifth and final shuttle servicing mission to NASA's Hubble Space Telescope, STS-125. The MULE carrier will join the Flight Support System, the Super Lightweight Interchangeable Carrier and the Orbital Replacement Unit Carrier in the Payload Hazardous Servicing Facility where the Hubble payload is being prepared for launch. The Relative Navigation Sensors and the New Outer Blanket Layers will be on the MULE. The payload is scheduled to go to Launch Pad 39A in mid-September to be installed into Atlantis' payload bay. Atlantis is targeted to launch Oct. 8 at 1:34 a.m. EDT. .Photo credit: NASA/Amanda Diller KSC-08pd2289

CAPE CANAVERAL, Fla. – At the Canister Rotation Facility at NASA's K...

CAPE CANAVERAL, Fla. – At the Canister Rotation Facility at NASA's Kennedy Space Center, the shipping container with the Multi-Use Lightweight Equipment (MULE) carrier inside is pressure cleaned after its arr... More

KENNEDY SPACE CENTER, Fla. -- The STS-108 and Expedition 4 crews head for the Astrovan and a ride to Launch Pad 39B. Leading the way are Pilot Mark E. Kelly (left) and Commander Dominic L. Gorie; behind them are Mission Specialists Daniel M. Tani and Linda A. Godwin; next is Expedition 4 Commander Yuri Onufrienko, followed by astronauts Daniel W. Bursch (left) and Carl E. Walz. This is the second launch attempt after the first attempt Dec. 4 was scrubbed due to poor weather conditions at KSC. The main goals of the mission are to carry the Expedition 4 crew to the International Space Station as replacement for Expedition 3; carry the Multi-Purpose Logistics Module Raffaello filled with water, equipment and supplies; and install thermal blankets over equipment at the base of the ISS solar wings. STS-108 is the final Shuttle mission of 2001 and the 107th Shuttle flight overall. Launch is scheduled for 5:19 p.m. EST (22:19 GMT) Dec. 5, 2001, from Launch Pad 39B KSC01PD1784

KENNEDY SPACE CENTER, Fla. -- The STS-108 and Expedition 4 crews head...

KENNEDY SPACE CENTER, Fla. -- The STS-108 and Expedition 4 crews head for the Astrovan and a ride to Launch Pad 39B. Leading the way are Pilot Mark E. Kelly (left) and Commander Dominic L. Gorie; behind them ... More

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Launch Pad 39A, a worker inside space shuttle Endeavour's aft section removes a cover to provide access for the removal and replacement of the Load Control Assembly-2 (LCA-2). Located in the orbiter's aft avionics bay 5, the LCA-2 assembly, which feeds power to the fuel line heaters, is believed to have caused the heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett. KSC-2011-3212

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Launch Pad 39A,...

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Launch Pad 39A, a worker inside space shuttle Endeavour's aft section removes a cover to provide access for the removal and replacement of the Load Control... More

KENNEDY SPACE CENTER, Fla. -- The Expedition 4 crew practice emergency exit from Space Shuttle Endeavour on the 195-foot level of the Fixed Service Structure. Leading the way is astronaut Carl E. Walz, followed by Commander Yuri Onufrienko and astronaut Daniel W. Bursch. Expedition 4, which is the replacement resident crew for the International Space Station, is traveling to the Space Station as part of mission STS-108. The training is part of Terminal Countdown Demonstration Test activities that also include a simulated launch countdown.. Launch of Space Shuttle Endeavour on mission STS-108 is scheduled for Nov. 29 at 7:44 p.m. EST KSC-01pp1686

KENNEDY SPACE CENTER, Fla. -- The Expedition 4 crew practice emergen...

KENNEDY SPACE CENTER, Fla. -- The Expedition 4 crew practice emergency exit from Space Shuttle Endeavour on the 195-foot level of the Fixed Service Structure. Leading the way is astronaut Carl E. Walz, follo... More

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Launch Pad 39A, a worker inside space shuttle Endeavour's aft section removed a cover to provide access for the removal and replacement of the Load Control Assembly-2 (LCA-2). Located in the orbiter's aft avionics bay 5, the LCA-2 assembly, which feeds power to the fuel line heaters, is believed to have caused the heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett. KSC-2011-3214

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Launch Pad 39A,...

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Launch Pad 39A, a worker inside space shuttle Endeavour's aft section removed a cover to provide access for the removal and replacement of the Load Control... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is lowered toward the Orbital Replacement Unit Carrier, or ORUC, for installation. The carrier will be installed in space shuttle Atlantis’ payload bay. The camera will record the STS-125 mission to service the Hubble Space Telescope. Space shuttle Atlantis' 11-day flight is targeted for launch May 12 and will include five spacewalks in which astronauts will refurbish and upgrade the telescope with state-of-the-art science instruments. As a result, Hubble's capabilities will be expanded and its operational lifespan extended through at least 2014. Photo credit: NASA/Dimitri Gerondidakis KSC-2009-2344

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at ...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is lowered toward the Orbital Replacement Unit Carrier, or ORUC, for installation. The carri... More

LAS VEGAS -- The Boeing Company tests the forward heat shield FHS jettison system of its CST-100 spacecraft at the Bigelow Aerospace facility in Las Vegas as part of an agreement with NASA's Commercial Crew Program CCP during Commercial Crew Development Round 2 CCDev2) activities. The FHS will protect the spacecraft's parachutes, rendezvous-and-docking sensor packages, and docking mechanism during ascent and re-entry. During a mission to low Earth orbit, the shield will be jettisoned after re-entry heating, allowing the spacecraft's air bags to deploy for a safe landing. In 2011, NASA selected Boeing for CCDev2 to mature the design and development of a crew transportation system with the overall goal of accelerating a United States-led capability to the International Space Station. The goal of CCP is to drive down the cost of space travel as well as open up space to more people than ever before by balancing industry’s own innovative capabilities with NASA's 50 years of human spaceflight experience. Six other aerospace companies also were selected to mature launch vehicle and spacecraft designs under CCDev2, including Alliant Techsystems Inc. ATK, Excalibur Almaz Inc., Blue Origin, Sierra Nevada Corp. SNC, Space Exploration Technologies SpaceX, and United Launch Alliance ULA. For more information, visit www.nasa.gov/commercialcrew. Image credit: Boeing The Ground Systems Development and Operations Program is developing the necessary ground systems, infrastructure and operational approaches required to safely process, assemble, transport and launch the next generation of rockets and spacecraft in support of NASA’s exploration objectives. Future work also will replace the antiquated communications, power and vehicle access resources with modern efficient systems. Some of the utilities and systems slated for replacement have been used since the VAB opened in 1965. For more information, visit http://www.nasa.gov/exploration/systems/ground/index.html Photo credit: Boeing KSC-2012-4386

LAS VEGAS -- The Boeing Company tests the forward heat shield FHS jett...

LAS VEGAS -- The Boeing Company tests the forward heat shield FHS jettison system of its CST-100 spacecraft at the Bigelow Aerospace facility in Las Vegas as part of an agreement with NASA's Commercial Crew Pro... More

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, a crane places the Cosmic Origins Spectrograph, or COS, on the Orbital Replacement Unit Carrier where it will be installed. The carrier will be placed in space shuttle Atlantis' payload bay for the Hubble servicing mission, STS-125, targeted to launch in mid-May. Installing the COS during the mission will effectively restore spectroscopy to Hubble’s scientific arsenal, and at the same time provide the telescope with unique capabilities. COS is designed to study the large-scale structure of the universe and how galaxies, stars and planets formed and evolved. It will help determine how elements needed for life such as carbon and iron first formed and how their abundances have increased over the lifetime of the universe. Photo credit: NASA/Kim Shiflett KSC-2009-2167

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at ...

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, a crane places the Cosmic Origins Spectrograph, or COS, on the Orbital Replacement Unit Carrier wher... More

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, workers pull cables between the 26th and 29th floors of high bay 3 in the 525-foot-tall Vehicle Assembly Building, or VAB, during part of a centerwide refurbishment initiative under the Ground Systems Development and Operations GSDO Program. The cable replacement project is under way in high bays 1 and 3 on the east side of the building, facing Launch Complex 39’s pads A and B. Approximately 150 miles of existing Apollo/shuttle era cabling is being removed to make room for installation of state-of-the-art command, communication and control systems that will be needed by future users to perform vehicle testing and verification prior to rollout to the launch pad. For more information, visit http://go.nasa.gov/groundsystems. Photo credit: NASA/Jim Grossmann KSC-2012-2601

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, work...

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, workers pull cables between the 26th and 29th floors of high bay 3 in the 525-foot-tall Vehicle Assembly Building, or VAB, during part of a cent... More

Previous

of 19

Next